Outsourcing of services for operation and management of DG sets installed North Side of HQNC area and associated repair/maint works under GE Utilities Udhampur

Amount

Outsourcing of services for operation & maintenance of DG Set of capacity 30KVA ,installed at Kali Mata Complex 1FOD. DG set will run during failure of electric supply from State Electricity/ breakdown of electric supply/low voltage of main electric supply or for any other reasons whatsoever, in two shifts per day (each shift of 8 hrs) starting from 04 PM in the evening to 08 AM by deploying One FGM (Skilled) in each shift all as per the direction of Engineer-in-Charge. Note: One FGM shall be made available in each shift of 08 hours i.e Two FGM for two shifts shall be employed by contractor to operate the DG set.

Outsourcing of services for operation & maintenance DG set of capacity 62.5 KVA, installed at IFA Building. DG set will run during failure of electric supply from State electricity/break down of main electric supply/low voltage of main electric supply or for any other reasons whatsoever, in one shift of 8 hours per day by deploying One FGM (Skilled) as per dierction of Engr-in-Charge.

Outsourcing of services for operation & maintenance of DG set of capacity 10 KVA, installed at Area Acoount (FOD). DG set will run during failure of electric supply from State electricity/break down of main electric supply/low voltage of main electric supply or for any other reasons whatsoever, in one shift of 8 hours per day by deploying One FGM (Skilled), as per the directions of Engr-in-charge.

Outsourcing for Manning & Operation of DG set of capacity 200 KVA installed at 57 W.E.U. DG set will run during failure of electric supply from State electricity/break down of main electric supply/low voltage of main electric supply or for any other reasons whatsoever, in three shift, round the clock per day (each shift of 8 hrs) by deploying one FGM in each shift all as per the direction of Engineer-in-Charge. Note: One FGM shall be made available in each shift of 08 hours i.e Three FGM (Skilled) for three shifts shall be employed by contractor to operate the DG set.

Outsourcing of services for operation & maintenance of DG set of capacity 62.5 KVA, installed at DDGSI .DG set will run during failure of electric supply from State electricity/break down of main electric supply/low voltage of main electric supply or for any other reasons whatsoever, in one shift of 8 hours per day by deploying One FGM,(Skilled) as per the directions of Engr-in-charge. Note: One FGM shall be employed by the contractor for the shift of 8 hours per day to operate the DG set.

Note for item 1 to 5: (i) The contractor will ensure suitable repalcement of Electrician/FGM/Pipe fitter /Mate on rest days and Wages for the same deemed to be included in the unit rates quoted against items of M&O. (ii) The contractor shall produce details of the persons deplyed by him his skilled/unskilled persons like Name, Aadhar No, Aadhar linked Bank A/c No, Experience certificate EPF No and ESIC No within a week of Acceptance of tender. The work will be commenced only after submission of requisite documents . (iii) The contractor shall ensure that his persons always be present in their shift. (vi) The contractor shall be responsible for maintaining the complete area (i.e. inside boundary wall ) such as building, hard standing, foothpath etc in neat and clean position . All necessary T&P for cutting /cleaning of grass and vegitation will be arranged by contractor without any extra cost. (iv) The contractor shall provide uniform, raincoat, protective clothing such as hand gloves, helmet, safety belt, first aid box and shoes etc to all persons on duty and the cost of the same is deemed to be included in quoted rate of items of M&O here in before. The uniform shall have the name of the contractor and MES written on the shirt Pocket (Left and right side).

Note for item 1 to 5: (v) The persons deployed by the contractor should have experience of nature of work under this CA. (vi) The contractor shall provide log sheet and maintain the the same on daily basis and the cost of the same is deemed to be included in quoted rate of BOQ here in before. (vii) THE CONTRACTOR SHALL MAKE PAYMENT TO HIS STAFF EMPLOYED FOR THIS WORK EVERY MONTH, ACCOUNTED FOR, FROM THE DATE OF COMMENCEMENT OF THE WORK AND SUBMIT TO THE ENGINEER-IN-CHARGE BANK STATEMENT/INDIVIDUAL’S PASS BOOK , EPF AND ESIC DETAILS AS A PROOF OF PAYMENT.

Taking out/dismantling any type of LT panel by disconnecting the electric connection carefully after taking proper shut down and removing from the site and stacking, complete all as specified and as directed by Engr-in-Charge.

Supply, installation, testing and commissioning of out door LT PanelSupply and installed, testing LT panel outdoor type weather proof panel floor mounted on equal angle CRCA steel sheet dust and vermin proof duly powder coated and wired as per standard engineering practice, the panel manufacturer should have got any one of the panel tested at CPRI similar design and technology shall be adopted for fabrication of panel, copy of CPRI test report shall be produced to GE along with the certificate from manufacturer of the panel that the similar design and standard have followed in these panels.The panel shall be comprising of following accessories :-Description all as per item No. 2 here-in-before but comprising of following accessories :- (a) MCCB 63 Amps 4 pole, 415 volts - 01 No. (b) Copper bus bar 4 strip as suitable rating-01 Set. (c) MCCB 32 Amps 4 pole, 415 volts- 02 No.. . (d) Four Pole Chageover switch 63Amp AC-23 (Side handle)-02No . (e) Digital Ammeter 0 to 100 Amps with CTs -01 Set (f) Digital Voltmeter 0-500 volts -01 Set (g) Phase indicator for three phase (RYB) -01 Set (set of three). (h) Complete wiring of panel board with PVC insulated copper conductor multi- strand cable -01 Job (i) Blank space for MCCB of rating upto 63 Amps ,4 pole -01 No .

Supply, installation, testing and commissioning of out door LT PanelSupply and installed, testing LT panel outdoor type weather proof panel floor mounted on equal angle CRCA steel sheet dust and vermin proof duly powder coated and wired as per standard engineering practice, the panel manufacturer should have got any one of the panel tested at CPRI similar design and technology shall be adopted for fabrication of panel, copy of CPRI test report shall be produced to GE along with the certificate from manufacturer of the panel that the similar design and standard have followed in these panels.The panel shall be comprising of following accessories :-Description all as per item No. 2 here-in-before but comprising of following accessories :- (a) MCCB 63 Amps 4 pole, 415 volts - 01 No. (b) Copper bus bar 4 strip as suitable rating-01 Set. (c) MCCB 32 Amps 4 pole, 415 volts- 02 No.. . (d) Four Pole Chageover switch 63Amp AC-23 (Side handle)-02No . (e) Digital Ammeter 0 to 100 Amps with CTs -01 Set (f) Digital Voltmeter 0-500 volts -01 Set (g) Phase indicator for three phase (RYB) -01 Set (set of three). (h) Complete wiring of panel board with PVC insulated copper conductor multi- strand cable -01 Job (i) Blank space for MCCB of rating upto 63 Amps ,4 pole -01 No .

Supply & install Battery 12volt 180 AH Make:- Exide/Amron

Dismantling and taking out of old unserviceable Battery Charger, Supply and install, New Battery Charger suitable for charging battery capacity 12volt up to 200AH Model 12-72 BC20A. Make:-Sine Trac.

M/S Hind Constructions

M/S H.R CONSTRUCTION CO

proach associates

slathia construction works

ATUL TRADING CO

PREM NATH KHAJURIA AND SONS

BARU ENTERPRISES