C/o 50 bedded Civil Hospital Building at Ghawandal, in Tehsil Shri Naina Devi Ji, District Bilaspur (HP) (SH Providing E.I. therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Make:- Legrand(Myrius), L&T(entice), Anchor (Roma Clasic ) as approved by Engineer-in -charge .

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Make:- Legrand(Myrius), L&T(entice), Anchor (Roma Clasic ) as approved by Engineer-in -charge .

Group C.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Make:- Legrand(Myrius), L&T(oris/entice), Anchor (Roma Clasic ) as approved by Engineer-in -charge .

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Supplying and drawing Lan cable Cat -6 solid copper conductor 4 pair protected with PVC Sheathed in existing surface /recessed steel/PVC Conduit as required. Make Polycab, Finolex, D-link.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required. Make:-Legrand, L&T,Anchor as approved by Engineer-in -charge.

2 modules (78mmx78mmx50mm)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. Make:- Legrand, L&T,Anchor as approved by Engineer-in -charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. Make:-Legrand, L&T,Anchor as approved by Engineer-in -charge.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required. Make:- Legrand(Myrius), L&T(entice), Anchor (Roma Clasic ) as approved by Engineer-in -charge .

Supplying and fixing Computer board comprising 3 nos 5 amp modular switches , G.I box 2 module for jack box and G.I Box 12 module for 5 amp switchs and 5 amp sockets comprising sheet cover for each 2 module metal box , one no computer jack (RJ-45)with shutter including connections etc as required. Make:- Legrand(Myrius), L&T(entice), Anchor (Roma Clasic ) as approved by Engineer-in -charge .

Supplying and fixing Bed side Light and heating point having 1 no G.I module Box 12 module, 1 no 12 module modular base & cover plate , 3 nos 5 amp switchs,3 nos 5 amp sockets ,1 no 15/16 amp switch ,1 no 15 amp mod socket, including connections etc as required. Make:- Legrand(Myrius), L&T(entice), Anchor (Roma Clasic ) as approved by Engineer-in -charge .

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.Make:-L&T,Legrand,Hagger , or its equivalent as approved by Engineer-in -charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Make:- Finolex, KEI, Anchor, Plaza as approved by Engineer -in -charge .

2x1.5 Sq. mm + 1X1.5 sq.mm

2x2.5 Sq. mm + 1X2.5 sq.mm

2x4 Sq. mm + 1X4 sq.mm

2x10 Sq. mm.+ 1X6 sq.mm

4x4 Sq. mm.+ 2X4 sq.mm

4x10 Sq. mm.+ 2X6 sq.mm

4x16 Sq. mm.+ 2X6 sq.mm

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. Make:-Finolex, KEI, Anchor, Plaza as approved by Engineer -in -charge .

1x1.5 Sq. mm.

3x1.5 Sq. mm.

3x2.5 Sq. mm.

S/L PVC conduit 25mm dia along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed as required:- Make:-Diplast/BEC/ Polyfit or its equivalent as approved by Engineer-in-charge.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:- .Make:- Legrand L&T Anchor as approved by Engineer-in -charge .

Supplying and fixing of bulk head fitting LED 12 watt ,6500k ,and it should be compatible with specification e.i. Power Factor > .9,Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc.Make -Panasonic/Jaquar/PHILIPS ,wipro or its equivalent as approved by Engineer-in-Charge(Five YEAR WARRANTY )

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- .Make:- Legrand L&T Anchor as approved by Engineer-in -charge .

Providing and fixing of surface mounted Luminaire of following watts LED batten ,having high Quality design aluminium extruded decorative end caps with and it should be compatible with specification i.e. Power Factor >.9,Harmonic Distortion <10% and efficacy >100 Lumens per watt ,CRI> 80 suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc.as required. Make :-Panasonic, Jaquar, Philips, wipro or its equivalent as approved by Engineer-in-charge.(Five YEAR WARRANTY )

Supplying and fixing surface mounting 1'x4' size 36 Watt LED surface mounted base light comprises of CRCA housing luminaire LED 36 watt 5700 K and it should be compatible with specification i.e Power Factor > .95,Harmonic Distortion<10% and efficacy>100 Lumens per watt suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc.as required Make :- Panasonic , Jaquar, Philips , wipro or its equivalent as approved by Engineer-in-Charge.(Five YEAR WARRANTY )

Supplying and fixing surface square type LED 36 watt 2X2 Feet, 6000k, and it should be compatible with specification e.i. Power Factor > .9, Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. Make - JAQUAR/Philips/Panasonic/wipro or its equivalent as approved by Engineer-in-Charge (Five YEAR WARRANTY )

Supplying and fixing surface square type LED 15 watt, 6000k, and it should be compatible with specification i.e. Power Factor > .9, Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. Make:- Panasonic/Philips, wipro or its equivalent as approved by Engineer-in-Charge. (Five YEAR WARRANTY )

Supplying and fixing of fancy wall bracket of chrome finish colour with opal glass diffuser made of mild steel, containing thread type LED lamp holder(s) of all sizes and shapes, complete with all accessories but excluding led lamp including making connections, testing etc. as required.: Make Philips,Jaquar Tisva or its equivalent as approved by Engineer-in -charge.( Five year warranty)

Providing and Installation of Wall mounting fan of 400 mm sizes i/e hang the same in position on the wall,connections,testing and commissioning etc.as required with minimum 3 star rating.Make:- Usha(Striker Hi speed),Bajaj,Crompton or its equivalent as approved by Engineer-in -charge.

Providing, installation, testing and commissioning of ceiling fan with 2 mod socket type 5 step regulator, including wiring the down rods of standard length (up to 30 cm ) with 16/0.20 mm twin twisted flexible ,cotton braided copper cable including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc as required. Usha Tech plus ,BEE, Crompton H.S. 5 star plus or its equivalent not less than three star as approved by Engineer-in-Charge

ceiling fan 1200 mm

Supplying and fixing of Exhaust fan (Plastic) with Louver shutter 300mm 1000RPM `1125 Air Delivery Ex fan on the existing opening including making the hole to suit the size of above fan making good the danmages complete with connections,testing and commissioning etc. as required. Make:- Usha, Crompton, Bajaj or its equivalent as approved by Engineer-in-Charge.

Providing and Installation of Exhaust fan 300 mm Light duty (domestic) in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. Make:- Usha , Crompton, bajaj or its equivalent as approved by Engineer-in-Charge.

Providing and Installation of Exhaust fan 300 mm HEAVY duty (domestic) in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. Make:- Usha, Crompton, bajaj or its equivalent as approved by Engineer-in-Charge.

Supply and fixing exhaust fan Louver shutter for 300/380mm exhaust fan on the existing wall painting including 12 mm thick wooden ply board for suitable size of exhaust fan hole.

Supplying and fixing of wall mounted 2U rack size: 550x400 mm depth including its complete accessories i.e.front glass door (tinted,toughened) with lock&key, 2 pairs pf 19" mounting rails with U-marking welded side walls 1U cable manager(1), hardware packet (1pkt), 3 socket 5 amp, power distribution unit (1 No) as per product code NWR-4U-5040-GR as required. Make:- D-Link or its equivalent as approved by Engineer-in-charge.

Supplying and fixing D- link DGS-1100-08 (8 Port) 8 10/100/1000 ports EasyL2 switch standalone switch in desk top (green ethernet) for getting blazing speed of Gigabit Ethernet L2 switch that delivers power performance and reliability i.e increasing the speed of net work server in large in switching protocol storing and forwarding as required. Make:- D-Link or its equivalent as approved by Engineer-in-charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-Make:-L&T,Legrand,Hagger , or its equivalent as approved by Engineer-in -charge.

Double door-8 way

Double door-12 way

Double door-16 way

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)Make:-L&T,Legrand,Hagger , or its equivalent as approved by Engineer-in -charge.

Double Door-6 WAY

Double Door-8 WAY

Supplying and erection of MCB DP 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. Make:- L&T, Legrand,Heggar as approved by Engineer-in -charge.

Double pole.

Triple pole & Neutral.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.-Make L&T, Hager,ABB or its equivalent as approved by Engineer-in -charge.

Supplying and fixing 5 amps to 32 amps , 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.)Make L&T, Hager,ABB or its equivalent as per approved by Engineer-in -charge.

single pole

Providing and installation of 9 watt of LED retrofit Lamp B-22 holder base with polycarbomate diffuser and aluminium heat sink including connections, testing and commissioning etc. as required. Make:- TISVA,wipro,Philips or its equivalent as approved by Engineer-in-Charge

Providing and fixing of lightning conductor finial, made of 20 mm outer dia. 1.2 mtr long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. Make:- True power , Earth plus, Ashloka or its equivalent as per best satisfaction of Engineer-in -charge.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and saltas required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and installation of stationary storage type Electric water heater (Geyser)of following capacity various sizes by means of expansion-bolts with nuts and washers, includingembedding of expansion-bolts in the wall, making good the damages, electricalconnections, testing etc. complete as required:-Make:-Usha,Bajaj,Recold or its equivalent as approved by Engineer-in -charge.

Providing and fixing 400 AMP , four pole, 415 volts, On-Load change over switch in cubical panel front handle operation, including drilling holes in the cubical, making connections, etc. as required.Make:-L&T,Legrand,Hagger , or its equivalent as approved by Engineer-in -charge.

Supplying and fixing 4 pole MCCB 630 Amp Ics = 100% icu, 36 KA & @ 415 volts, 50 Hz with Microprocessor release Mtx2.0 & iTRP3 conforms to IS/IEC 60947-2 complete with connection ,testing and commissioning etc as required .Make:-L&T,Legrand,Hagger , or its equivalent as approved by Engineer-in -charge.

Supplying and fixing of 4 pole MCCB 320 Amp Ics = 100% icu, 36 KA & @ 415 volts, 50 Hz with thermal magnet in release complete with connection ,testing and commissioning etc as required. Make:- L&T, Legrand, Hagger, or its equivalent as approved by Engineer-in -charge.

Supplying and fixing of 4 pole MCCB 200 Amp Ics = 100% ICU, 25KA & @ 415 volts, 50 Hz with thermal magnet in release complete with connection, testing and commissioning etc as required. Make:- L&T , Legrand, Hagger, or its equivalent as approved by Engineer-in -charge.

Supplying and fixing of 4 pole MCCB 100 Amp Ics = 100% ICU, 25KA & @ 415 volts, 50 Hz with thermal magnet in release complete with connection, testing and commissioning etc as required. Make:- L&T, Legrand, Hagger, or its equivalent as approved by Engineer-in -charge.

Supplying and fixing 4 pole MCCB 63 Amp Ics = 100% icu, 25KA & @ 415 volts, 50 Hz with thermal magnet in release complete with connection ,testing and commissioning etc as required .Make:-L&T ,Legrand,Hagger , or its equivalent as approved by Engineer-in -charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-The panel should be approved /Tested from the CPRI lab.& should confirmed to ISI: 64139

300 mm deep (nominal)

Supplying and fixing of 4 pole DU 125H/DU100D/DU125D/DNO MCCB Enclosure complete with connection testing and commissiong etcasrequired .Make:-L&T ( cat no-CM9O9960000), Legrand,Hagger , or its equivalent as approved by Engineer-in -charge.

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17Mm),in the existing enclosure with all accessories including connections etc. as required:-.Make:-L&T ,Legrand,Hagger as approved by Engineer-in -charge.

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17Mm),in the existing enclosure with all accessories including connections etc. as required:-.Make:-L&T ,Legrand,Hagger as approved by Engineer-in -charge.

Supplying and fixing copper strip bus-bars suitable for 400 Amp. 415 volts capacity 4 No. each of cross-sectional area (38.10mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required:-.Make:-L&T ,Legrand,Hagger as approved by Engineer-in -charge.

Supplying and fixing copper strip bus-bars suitable for 800 Amp. 415 volts capacity 4 No. each of cross-sectional area (50.80mmx9.50mm),in the existing enclosure with all accessories including connections etc. as required:-.Make:-L&T ,Legrand,Hagger as approved by Engineer-in -charge.

S/F indicator set RY &B with 3 Nos Kit kat (LED type) to shown the three indicating in the existing pannel complete etc as required.

S/F Shock treatment chart on the existing wall etc as required including carriage of material within all leads and lift.

S/F rubber mat 1x2 meter long 12mm thick infront of main panel as required including carriage of material with in all leads and lift.

supplying and fixing CT coil 600/5 amp with burden of VA 15 accuracy class -1 Make:-Automatic Electric Ltd ,L&T,Legrand .

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-Make:Finolex ,KEI,Plaza or its equivalent as approved by Engineer-in -charge.

Armoured cable 25 sqmm(3.5 core)

Armoured cable 50 sqmm(3.5 core)

Armoured cable 70 sqmm(3.5 core)

Armoured cable 400 sqmm(3.5 core)

SITC 1.5 ton invertor split type air conditioner Hot and Cold four star rating with voltage stablizer V-gard, Microtec, 140V to 290 V , advanced filter ,E saver mode , quit mode, dual display ,auto clean ,anti bacteria filter jet Cool on/off timer sleep mode compressor cord less remote complete in all respect as per comprising to ISI with latest amendment suitable to operate on 230 volt /240 volt +_ 10 % AC supply capable to perform the function of cooling dehumidification air circulation ventilation and fitting in size of nominal cooling capacity and drain pipe 20 mm dia approximately 3mrs long 2 nos copper pipe with insulator for inlet and outlet approximatey 3 mtrs long and M.S power coated frame /stand for erection of out door unit of split type A.,C including carrigae of material with in all leads and lift. Make -Daikin (model:FTHT50), O Genral/Mitsubsi or equivalent as approved by the Engineer Charge.

Supplying and fixing 1.8/2.0 ton invertor split type air conditioner Hot and Cold four star rating with voltage stablizerV-gard, Microtec, 140 V TO 290 V, advanced filter ,E saver mode , quit mode, dual display ,auto clean ,anti bacteria filter jet Cool on/off timer sleep mode compressor cord less remote complete in all respect as per comprising to ISI with latest amendment suitable to operate on 230 volt /240 volt +_ 10 % AC supply capable to perform the function of cooling dehumidification air circulation ventilation and fitting in size of nominal cooling capacity and drain pipe 20 mm dia approximately 3mrs long 2 nos copper pipe with insulator for inlet and outlet approximatey 3 mtrs long and M.S power coated frame /stand for erection of out door unit of split type A.,C including carrigae of material with in all leads and lift.Make -Daikin (model:FTHT60), O Genral/Mitsubsi or equivalent as approved by the Engineer Charge.

Providing and commissioning of self supporting stool type ladder made out of aluminium section of size 66mmx31mmx3mm thick approximate with special steps of various sizes (i) 57mmx3mm thick approx. supported on 15 mm solid square rod. (ii) 63mm wide to 112mm wide at a required distance of 300mm apart on side and other supporting side having steps made out of 25 mm dia support approx. Aluminium fluited pipe at required distance of 300 mm apart complete with servicemen's plateform at the top and rubber shoes at four legs bottom end to make the ladder non slippery and durable.Required size 8 ft Height.

Kalra Hardware and Electric Store

Ratwan Light House