130 H(F)(W)/2024-25

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

Supply of Gland 63 mm

Supply of Gland 50 mm

Supply of Pre Cost of Pannel A & B Type Base

G.I. Pipe 6'' dia

Copper L Piece 50x225x10 mm

Aluminum Lug for 250 KVA Transformer

Holding Clamp for TOP Channel, TPMO Set & Fuse wire Set with Nut & Bolt

Nut & Bolt

Stone Pad

Fire Extngusher mounted Type

Fire Bucket (04 No) with Sand Complete

Control Cable 4 Core 2.5 sqmm

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 30 Kms. (distance approx)

S.T. Pole 11 Mtr. long

11 KV XLPE Cable 3x120 sqmm

11 KV Out door Cable Jointing kit 3x120

11 KV Staight Through Cable Jointing kit 3x120

L.T. XLPE Cable 1x400 sqmm

L.T. XLPE Cable 3.5x150 sqmm

L.T. XLPE Cable 3.5x240 sqmm

ACSR Weasel Conductor

ACSR Panther Conductor

33 KV VCB 800A, 750 MVA

33 KV Line Isolator 800 A,

33 KV Bus Isolator 800A

33 KV PT Outdoor

33 KV Control Panel for Single Feeder

T/F 250 KVA

A Type Pannel

B Type Pannel

Other matching Materials

Dragging of ST/PCC Pole from dump site to pit site

Fabrication and Errection of Double Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of ACSR Panther Conductor as per RESSPO Norms

Installation of A Type Pannel

Installation of B Type Pannel

Mounting of 250 KVA Transformer as per RESSPO Norms.

Laying of underground 11 KV 3x120 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x120 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Laying of L.T. XLPE Cable 3.5x150 sqmm

Laying of L.T. XLPE Cable 3.5x240 sqmm

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x120 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x120 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Construction of Transformer Plinth size 2x2x1.5 including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Chemical Type Earthing for A& B Pannel

Connection of L.T. XLPE Cable Different Size & Different Places

Replacement of PG Clamp for ACSR Panther Conductor made Aluminum Alloy LM-6 No. GI Nut and Boltof Size 63x18 mm heavy duty (All Material Labour and T&P will be Provided by the Contractor)

Replacement of 33 KV Isolator Clamp for ACSR Panther Conductor made Aluminum Alloy LM-6 No. GI Nut and Boltof Size 63x18 mm heavy duty (All Material Labour and T&P will be Provided by the Contractor)

Replacement of 33 KV CT for ACSR Panther Conductor made Aluminum Alloy LM-6 No. GI Nut and Boltof Size 63x18 mm heavy duty (All Material Labour and T&P will be Provided by the Contractor)

Construction of Trunch with Cover for Control Cable

Installation of 33 KV VCB 800A, 750 MVA

Installation of 33 KV Line Isolator 800 A,

Installation of 33 KV Bus Isolator 800A

Installation and Replacement of 33 KV PT Outdoor

Installation of 33 KV Control Panel for Single Feeder

Repalcement of line & Bus Isolator

Laying of Control Cable

Fencing of Switch Yard with Gate

Painting of Switchyard Structure

Delta Type Earthing

Providing & Fixing of Street light ( LED 90 Watt. ISI Mark) and fitting

Control Room Wiring with all accessries

SHRI HANUMAN ENTERPRISES (BID ID -5013639)