Comprehensive maintenance for B/R services to OTM Accn of HQ Sub Area ,Corps Auditorium ,Chinar Library ,Sand Model etc and certain bldgs at Zone A at BB Cantt Srinagar

Amount

Dismantling plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof coverings complete, all as specified and as directed

S&F Galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coatch screws and washers in roofs, 0.63 mm thick m Gde-o quality, with 120 grms/sqm zinc coating and Gde 'B' (i.e 12.5 mm ) corrugation, complete, all as specified and as directed

S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers complete all as specified and as directed

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S & F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and as directed

Preparation of new steel surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide chrome primer, complete all as specified and as directed .

M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc complete all as specified and as directed .

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets. complete all as specified and as directed .

M& L for insulated PVC wall lining 25mm width consisting of PVC insulated panels having expended polystyrene (EPS) stuck to 2mm thick wood grain printed PVC sheet used instead plained colour sheet including suitable PVC beading complete all as specified and directed .

S & F Gypsum Board 10mm thick as in Ceiling ,fixed with screw as per manufactures instructions including GI Frame work for gypsum board made out of GI sheet not less than 20 Gauge thickness in ceiling fixed with screws,frame suspended with 4mm dia GI wire as per manufactures instructions ,complete all as specified and directed.

S&F in repair wooden laminated flooring 1200x1200mm and 8-10mm thick with adhesive and base as specified by manufacturer ,including 12mm thick BWR plywood and necessary farme work and finally finishing with french polish (two or more coats) and fixed complete all as specified and directed.

M&L for Khatamband pattern false ceiling ,design as approved by GE with ornamental wood work made out of stainless including 12mm thick BWR plywood and necessary framework and finally finishing with french polish (two or more coats ) and fixed complete all as specified and directed.

M&L for Australlian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed complete all as specified and directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling complete, all as specified and as directed.

S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and not exc 25 sqcm fixed with nails etc complete, all as specified and as directed.

S&F 2nd class hard wood plain clean sawn fillets square, rectangular in sectional area exc 13 sqcm and nexc 25 sqcm fixed with nails etc complete all as spd and directed

Demolition of cement concrete (un reinforced) in ground floor and paving not exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), includingmaking joints with or without grooves (thickness of joints except at sharp curveshall not to more than 5 mm), including making drainage opening wherever required complete. all as specified & directed.

M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair all as specified and as directed.

M&L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:4 complete, all as specified and as directed.

M&L for Vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of mortar 1:4 for layig floor finish complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete, all as specified and as directed

M&L for Glazed ceramic coloured/printed tiles 450X 350X 7mm thick as in vertical surfaces such as dado, skirting set jointed in neat cement slurry including pointed in white or coloured cement to match over and including 10 mm thick screed bed in cement mortar 1:3 complete, all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thcik screed bed or bedding layer in CM 1:3 complete all as specified and directed.

Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc), incl dismantling existing water tanks, complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing 15/ 20 mm dia and connections and stacking neatly for offering credit, complete all as specified and directed.

M&L for Tubes, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L for Tubes, medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L PBS roll 20 mtr long and 100 cm wide type-III weight 40 Kg per roll (As per sample) complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) not exc 1.5 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed .

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specfied and as directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing

S&F butt hinges, medium weight cold rolled, mild steel of size 75 mm complete, all as specified and as directed

S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified

S&F 100 mm aluminum alloy handles, fabricated type, anodised complete all as specifed

Hacking out old broken glass (any thickness size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed incl S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete, all as specified and as directed

S&F 6.30 mm thick coloured sheet glass ordinary quality and glazing with oil puitty in squares n exc 0.5 sq. m each pane complete all as specified and directed.

S&F Mortice lock, vertical type, size 100 m Mild steel 2 levers complete all as specified & directed.

S & F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water etc. complete all as spcified ad as directed.

M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:6,even and smooth w/o using extra cement complete all as spcified ad as directed.

15 mm thick rendering in two layer (10mm + 5mm) on fair faces of brick /concrete on wall including facia chhajja etc.surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing Liquid water proofing compund in the proportion as mentioned in manufacturer's instructions complete all as spcified ad as directed. Note : Water proofing compund to be measured and paid for separately as supply only.

Supply only liquid integral water proofing compound.

M & L preparation of new plastered surface and applying two coat of cement base paint of approved tint/ colour on wall including cornices, pilasters complete all as spcified ad as directed.

M & L preparation of new plastered surface and applying applying two coat of distemper oil emulsion, white or tinted over a coat of primer complete all as spcified ad as directed.

S & F in repair aluminium clip/ bead with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed.

Dimantling pipes of any desc.fixed to wall or laid under floor complete all as specified and directed.

M& L PVC (SWR) single socketed in any length with rubber ring joint fixed to wall with suitable MS clamps , for 110mm as in rain water pipe complete all as specified and directed.

M& L PVC (SWR) single socketed in any length with rubber ring joint fixed to wall with suitable MS clamps , for 75mm as in rain water pipe complete all as specified and directed.

PVC SWR branch piece single equal or unequal 110mm complete all as specified and directed.

PVC SWR branch piece single equal or unequal 75mm complete all as specified and directed.

PVC (SWR) bends any radius 110mm complete all as specified and directed.

PVC(SWR) bends any radius 75mm complete all as specified and directed.

S&F in repairs wall mounted EWC with all fittinmgs and accessories all as per manufacturers instruction ,complete all specified and directed .

S &F in repairs EWC cascade with all fittings and accessories all as per manufactures instructions ,complete all as specified and directed :

S&F in repairs urinal with sensor ,flat back with integrated EFS of size 740x330mmx362mm, ivory with grating and union for discharge pipe includuing connecting to waste pipe ,complete all as specified and directed.

Water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) fixed in repairs complete all as specified.

S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete fixed in repairs complete all as specified and as directed.

S&F in repair wash hand basin vitreous china size 550x400mm white flat back including CP pillar tap heavy duty as approved by GE ,waste,chain plug,pvc connection, pvc waste pipe complete all as specified and as directed.

S&F in repair CP Mixer single lever basin mixer fancy type for WHB / Sink with double action for hot/Cold water complete all as specified and as directed.

PVC connection of PTMT nuts 15x600mm long fixed in repair.

PVC connection of PTMT nuts 15x450mm long fixed in repair.

10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete all as specified and as directed .

Taking down aluminum windows including frame if required and repair the same including repair of rubber bidding,aluminum clip,adjusment of glasses,repair of floor spring or hydraulic door closer with oiling or greesing etc.ajusment of horizontal, vertical or middle style . complete all as specified and as directed .

Waste pipe 32mm for WHB with coupling fixed in repairs.

Dismantling wrought iron or mild steel work of any description not other wise provided, Complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. With ends of bars shouldered and/or riveted or gorged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and as directed.

M/S Tajamul Ah Buchh

M/s Lal Enterprises

M/S MUSHTAQ AHMAD BHAT

M/S Gh Qadir

M/S DFA Enterprises