Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹73,950
Closing Date
8 Jun 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Commissioner Nagercoil City Municipal Corporation
City Municipal Corporation Office Nagercoil 629001 Ph.No. 04652231516
Nagercoil Corporation Putheri Lake Front Development
2023_MAWS_320993_1
E3/3616/2022
Open Tender
Civil Works
Lump-sum
90 days
Nagercoil Corporation Putheri Lake Front Developme
Registered Contractor
4 documents required · 4 mandatory
₹0
₹73,950
20 Jun 2023
30 May 2023
8 Jun 2023
30 May 2023
8 Jun 2023
30 May 2023
Amount
Putheri Lake Front Development
Earthwork Excavations - Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum - Narrow Foundations - First Depth Upto 2m
Good Earth Filling - Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.
Pile boring - Providing and boring of piles with necessary tools and equipments to remove the core and provide shaft with the required diameters and depths show on the drawing including removal soil, lowering the reinforcement cage but excluding cost of reinforcement etc. all complete as per drawings specification and as directed by engineer in charge
Plain Cement Concrete - Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
Reinforced Cement Concrete - Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - Do same as item no. 4 but P/L M20 Concrete up to highest plinth - For all RCC work
Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. - CC 1:1.5:3
Shuttering - Centering for soffits of RCC slab of plane surface like lintels, beam etc, including sheltering 3m high using mild steel sheet of size 90 cm x 60 cm x and B.G 10 stiffened with MS angles of size 25 mm x 25mm x 3mm laid over silver Oak (CW) joists of size 10 cm x 6.5 cm (Spread at about 90cm c/c) and supported by casuarina prep of 10cm to13cm dia (spaced at75cm c/c) complying with standard specification and linked 10M (PAD ) Data 38
Reinforcement works - Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
250 mm Exposed Brick Wall - Brick work in CM 1:5 (one cement x fine crushed stone stand (m sand) using IInd class wine net Bricks of size 9" x 4 3/8" x 2 3/4" including finishing using etc, complete complying with standard specification - 100 ft
115 mm Exposed Masonary wall Brick Partition walls using II nd class widecut bricks of size 9" x4 3/8 "x 23/4" in C.M 1:3 (One part of cement three ppart of crushed stone (M-sand) using hoop Iron reinforcement , if found necessary standard specification including finishing ,using etc. Complete Complying with Standard specification Sqm
Providing and laying rough plastering of walls with cement mortar 1:5, average 12 mm thick according to specifications. Rate shall include for shuttering, formwork and curing etc. complete all as directed.
Door - Window and Ventilators - Supplying & fixing door shutters for Solid Core Flush Shutters with Teak ply on both side with teak wood lipping alround 35mm thick, single leaf confirming to IS:12406/1989 with 35x12mm T.W. Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings, such as 300 mm tower bolt 2nos, 200mm towerbolt 1 No. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos and 1No. Door stopper etc complete.
Supplying Fabricating a and fixing in position Aluminium Powdered Coated Natural Colour mat Fixed Two Track Sliding Window in all floors with Aluminium Section of Outer Frame -2082-34 x 44.45xx 28.5x 2 of weight @0.554 kg/mm. Shutter frame -4124-34x 44.5 x28.5x15 of weight @0.494 kg/mm. mullion -9139-57x34x25x2 of weight @0.810kg/m. chest angle -2081-50x50x4.9 of weight @0.184kg/m with necessary accessories such as rubbut beadings special hinges lock handles including supplying and fixing 4mm thick plain form including cost of all material, labours ,power consumption required for fabrication , drilling holes in RCC column, slab masonry wall wherever necessary with power drills to the required extend and make good to the original condition after fixing and also directed the aluminium section are to be anodixied with matt finished work under electrically controlled in accordance with IS 1869/1962 for an Average anodic film thickness 15 micron etc Complete - Sididng window
Flooring Works - Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 10mm thick (average) of 2' X 1' in size laid in cement mortar 1:2 (one cement and two Plastering sand) 20mm thick & pointed with same colour of cement etc., complete as per standard specification
Granite flooring and skirting - Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers
Ceramic Tile Dadooing - Dadooing the wall with ceramic tiles 450 mmx 600 mm ( Pattern design ) Cement moratar 1:2-20mm thick x pointed with same colour of cement et. Complete as per drawing specification and as directed by agencies in charge
Painting works - Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
Water Proofing Works - Providing and laying integral cement based water proofing of average 100 mm thick in proper slope as per specifications given below: a) cleaning RCC slab and applying neat cement slurry mixed with waterproofing compound. b) providing and laying brickbat coba in CM 1:4 mixed with water proofing compound and curing for a period of 24 hours. c) laying of 25mm thick PCC 1:1.5:3 mix with 6mm and down size coarse aggregate and water proofing compound, finishing smooth, making half round vata at the junction of parapet wall and slab, and curing for 10 days. NOTE:- Contractor to submit a guarantee in respect of performance of waterproofing, for 10 years on a Stamp-paper .
Providing, supplying, mixing, laying cement plaster on terrace slab 12mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No:1 or approved equivalent conforming to IS at the rate specified by the manufacturer including preparation of surface, dewatering, finishing, curing etc. all complete as per manufacturer's specifications and as directed.
Structural Steel Works - Supplying Fabricating erection Structural Steel work for coofing welded as bolting type using Ms Channels angles plates and round bar etc. Conforming to IS Specification including prime Coating and enamel painting as per design given by the departmental officers etc . Complete as per Standard Specification.
Providing, cutting and fixing 3mm thick febric sheet over MS structure with necessary fixing arrangement, colour as per drawings, specifications and as diected by engineer in charge.
Galvanised iron corrugated sheets (including 15 cm. Lapping) 0.8mm thick
Parking area development - Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.
Tree Plantation - Planting TREES by Digging holes(.6x.6x.6) in ordinary soil and refilling the same with the excavated earth mixed with manure in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts
Container Kiosk - Procument Furnishing and supply of standard one turip 20 ftx3 ft shipping Container kisok with , External Length -6.06m, External Width - 2.44m, External Height - 2.59m, Internal Width - 2.35m, Internal Length-5.84m, Internal Width-2.39m, Door Width- 2.34m, Door Height -2.28m, Weight -3100kg, Floor type-28mm Main ply, Internal Floor Covering- 2mm Vinyl, Internal Wall Covering 8mm Melamine Faced Chipboard , Finished With : 2x sewing hatches on the front side 2350mm width x 900 mm high, 1x sewing hatch on the end 1800mm wide x 900mm high, Steel 10 points loading personnel door in the rear, Double opening door on end for advertising Potenetial, Fully insulate with 100mm thick earthwork on the , ceiling , Living Boards are 3.6mm thick polyester found Plywood on the Ceiling, 8mm thick Melamine Faced Chipboard on the walls , 2mm thick non slip Vinyl Flooring Covering Furnished with: Kitchen Equipments Including Sinks , Workshops, Coffee Machines ,Ovens, Complete With Electrical & External Supply
REJUVENATION UNDERPASS: Artistic work with revosal painting including clear the surface of dust or other particles on the surface with moist nag, use a wine brush to remove the rust from the surface and remove the look paint by using sandpaper ,scrapper or putty knife spraying with layer to the Specified pattern as directed by the Architect and Finish dry of any paint drip
P.C. ANTHONI MARIYA GRATAS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .