Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.1 LAccepted-AOC 80 G T ROAD FEROZEPUR CANTT PB | L1 | Accepted-AOC Due to lowest bid | |
| 2 | L2₹47.5 L+₹5.2 L (12.4%)Rejected-Finance | L2 | Rejected-Finance Due to higher bid | |
| 3 | L3₹47.7 L+₹5.5 L (12.9%)Rejected-Finance | L3 | Rejected-Finance Due to higher bid | |
| 4 | L4₹48.0 L+₹5.8 L (13.7%)Rejected-Finance | L4 | Rejected-Finance Due to higher bid | |
| 5 | L5₹48.4 L+₹6.1 L (14.5%)Rejected-Finance | L5 | Rejected-Finance Due to higher bid |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
30 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) FEROZEPUR CANTT
GE (WEST) FEROZEPUR CANTT
ADDN ALTN TO SEWAGE LINE IN MD ACCN AND 550 ACRE AREA AND PROVN OF GUARD ROOM WITH ATT TOILET UNDER GE (WEST) FEROZEPUR CANTT
2023_MES_628149_2
802023/GE-71/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST) FEROZEPUR CANTT
₹99,800
Yes
13 Jan 2024
9 Dec 2023
1 Jan 2024
9 Dec 2023
30 Dec 2023
23 Dec 2023
Amount
Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m deep and getting out complete all as specified and directed.
Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) in foundation trenches or drain (not exceeding 1.5m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out excavated soil and disposal of surplus excaveted soil as directed, within a lead of 50m complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3m depth and not exceeding 10 Sqm on plan, for shafts, wells, cesspits, manholes, pier holes, etc and getting out, complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.5m wide and exceeding 3.0m but not exceeding 4.5m depth and not exceeding 10 Sqm on plan, for laying of cable and getting out, compete all as specified and directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.
Removal of surplus soil to a distance not exceding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L treating the backfill in contact with foundation @ 7.5 litres of emulsion / Sqm of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.
M&L treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
M&L treating the soil under plinth protection @ 5 litres of emulsion / Sqm of surface area complete all as specified and directed.
M&L treating the soil along with external perimeter of building @ 2.25 litre of emulsion / Sqm of the perimeter wall complete all as specified and directed.
M&L hardcore of broken bricks of gauge not exceeding 63mm, depositing spreading and leveling in layers not exceeding 15cm thick watered and rammed to a true surface as under floors complete all as specified and directed.
M&L plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation filling in mass concrete or in sub base of floors complete all as specified and directed.
M&L mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape as required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L mild steel 8mm dia TMT bars as in reinforcement cut to length bent to shape as required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and directed.
M&L use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.
M&L use and waste formwork to sides of pillars, posts, struts, piers, columns, and stanchions square, rectangular or polygonal etc. complete all as specified and directed.
M&L use and waste formwork to chajja, facia and similar items including edges including supports, etc. with rough finished surface of concrete complete all as specified and directed.
M&L use and waste formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. rough finished surfaces of concrete flat complete all as specified and directed.
M&L use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.
M&L RCC M-25 design mix using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L RCC M-25 design mix using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L RCC M-25 design mix using 20 mm graded aggregate in Chajjas complete all as specified and directed.
M&L RCC M-25 design mix using 20 mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L RCC M-25 design mix using 20 mm graded aggregate in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L 50mm thick cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
M&L cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed.
M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.
All as per ser item No. 29 here-in-before but except bricks.
M&L brickwork with sub-class 'B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:3 complete all as specified and directed.
M&L rendering/plastering, 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering/plastering, 15mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering/plastering, 10mm thick in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.
S&F factory made pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with Double rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
S&F factory made pressed steel frames made of 1.25mm thick mild steel sheet of profile 125mmx60mm for door and window frames with Double rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
S&F factory made 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified and directed.
S&F factory made 35 mm thick, 2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.
M&L cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in bed block of hold fast, coping including necessary form work complete all as specified and directed.
M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats including necessary form work complete all as specified and directed.
S&F Factory made box type steel window/ ventilators with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
S&F Factory made box type steel window/ ventilators with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of Zinc chromate primer complete all as specified and directed.
S&F 300mm ordinary rat tail rod pattern springs including rolled and roller plate complete all as specified and directed.
S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.
S&F mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified and directed.
S&F mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.
S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares not exceeding 0.50 Sqm complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S&F in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent as approved.
S&F PTMT butt hinges 100 mm long complete all as specified and directed.
S&F PTMT tower bolt 150 mm long complete all as specified & directed.
S&F PTMT pressed handle 150 mm size oval type stove enamelled black complete all as specified & directed.
Spreading & levelling of earth and soil in layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and directed. Note :- The earth / soil received from excavation shall be used.
M&L glazed ceramic coloured (colour & shade as approved) tiles non-skid of size 400mmX400 and 7mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed.
All as per ser Item No. 55 here-in-before but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.
M&L glazed ceramic coloured (colour & shade as approved) tiles of size 450mmX350 and 7mm thick on vertical surface set and jointed in neat cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tile complete all as specified and directed.
S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified and directed.
S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
S&F galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F Vitreous China wash basin, white, flat back, size 550mmx400mm excluding taps, waste chain & plug & porcelain stopper but including angle iron/cast iron brackets of required size as directed complete all as specified and directed.
S&F vitreous China squatting pan of pattern “Orissa Pattern” size 580mm X 440mm white with ‘P’ or ‘S’ trap, front or back inlet any pattern including provision of lime concrete bedding etc complete all as specified and directed.
M&L 10 litre capacity PVC low level flushing cistern syphonic action type with inlet ball valve, float and handle and including bracket and flush pipe complete all as specified and directed. Make:- Parryware (Slimline) / Hindware (Sleek)
S&F Vitreous China bowl urinal flat back, size of 465mm X 355mm X 265 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.
S&F 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal including joints fixed to wall complete all as specified and directed.
All as per ser item No. 66 here-in-before 100mm dia but laid in trenches.
All as per ser item No. 66 here-in-before 75mm dia but laid in trenches.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F cast iron floor trap of 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 complete all as specified and directed.
S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as specified and directed.
S&F waste coupling of bore dia 32 mm of PTMT (half or full threaded) (minimum weight 32mm-45Gms/40mm-60 Gms) complete all as specified and directed.
S&F waste coupling of bore dia 32 mm of PTMT but suitable for urinals (minimum weight 32mm-45gms) complete all as specified and directed.
S&F PVC waste pipe, 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed in repair, complete all as specified and directed.
S&F 15mm bore pillar tap, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.
S&F bib taps, fancy type chromium pllated, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F Stop/Angle valve 15mm bore fancy type chromium plated, screwed down high pressure, with high pressure crutch or butterfly handle, screwed both ends for iron pipeor union (Concealed type) complete all as specified and directed.
S&F Stop/Angle valve 15mm bore fancy type chromium plated, screwed down high pressure, with high pressure crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed.
S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.
S&F 15 mm bore chromium plated brass shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.
S&F decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed.
M&L preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and directed.
M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat chalk white primer complete all as specified and directed.
M&L preparation of new plastered surfaces of wall and applying two coats of oil bound distember complete all as specified and directed.
M&L white wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.
M&L white wash in three coats on newly plastered surfaces of walls including preparation complete all as specified and directed.
M&L plastering, 10mm thick in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as on roof slab top complete all as specified and directed.
Supply only liquid water proofing coumpound.
M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm including cleaning surfaces complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 Gms/Sqm) land on primed surface by forced application complete all as specified and directed.
M&L preparation of newly plastered concrete/ roof treatment surfaces and applying two coats of Aluminium paint over /APP membrane etc over 10 cm width or girth complete all as specified and directed.
M&L preparation new concrete surfaces of walls of any description (i.e road side kerb stone/ plastered surfaces) over 10cm width or girth and applying two coats plastic emulsion paint complete all as specified and directed.
M&L machine presssed precast concrete interlocking paver block (Grey Colour) of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 grade with grey cement and no pigment laid dry over sand cushion complete all as specified and directed. Note :- Sand cushioning shall be measured and paid for separately under relevant item.
M&L machine presssed precast concrete interlocking paver block (Coloured) of any shape and size confirming to IS: 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment laid dry over sand cushion complete all as specified and directed. Note :- Sand cushioning shall be measured and paid for separately under relevant item.
Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 150 mm complete all as specified and directed.
Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 200 mm complete all as specified and directed.
Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 250 mm complete all as specified and directed.
M&L 150m dia SGSW drain pipes laid in trenches and jointed complete all as specified and directed.
M&L cement concrete 1:3:6, type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 150 mm bore pipe complete all as specified and directed.
M&L cement concrete 1:3:6, type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 200 mm bore pipe complete all as specified and directed.
M&L cement concrete 1:3:6, type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 250 mm bore pipe complete all as specified and directed.
M&L 150 mm dia reinforced concrete pipes, class NP2 laid and jointed complete with collars in trenches complete all as specified and directed.
M&L 200 mm dia reinforced concrete pipes, class NP2 laid and jointed complete with collars in trenches complete all as specified and directed.
M&L 250 mm dia reinforced concrete pipes, class NP2 laid and jointed complete with collars in trenches complete all as specified and directed.
M&L cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4, type B1, smooth finished and reforming branching as required for 150 mm dia pipes complete all as specified and directed.
M&L cement concrete 1:2:4, type B2 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified and directed.
M&L cement concrete 1:3:6, type C-1 as in surface channels and drains in manhole inside area etc complete all as specified and directed.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.as in manhole pipe line portion only complete all as specified and directed.
M&L providing cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) in win-dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, ier aps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removing debris outside MD land complete all as specified and directed.
M&L RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in precast cover slab, shelves and similar articles and setting in mortar complete with joints to match complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
M&L 75 mm thick, cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floor topping, complete all as specified and directed.
M&L 50mm thik cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and directed.
M&L 100 mm thick, cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in floor topping, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L point wiring complete with 1100 Volts grade PVC insulated unsheathed FRLS cable of Copper conductor, multi stranded of size 1.5 Sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing mild steel pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheated stranded Copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/bell point controlled by one single pole one way switch.
(b) One socket outlet on the same board controlled by one single pole one way switch
(c) One 5 Amps socket outlet independent controlled by one single pole 5 Amps switch.
All as per ser Item No. 119 here-in-before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sqmm PVC insulated Copper conductor and 2.5 Sqmm Copper conductor for continuous earthing complete.
S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.
S&F Switch piano flush type 15 amps, single pole one way complete all as specified and directed.
S&F Socket outlet 2 in one, 5/6 Amps flush type complete all as specified and directed.
S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified and directed.
S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all as specified and directed.
S&F lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings including 10 Watts LED bulb complete all as specified and directed.
S&F exhaust fan, steel body AC single Phase. 230 Volts of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 Volts, 1200mm sweep minimum air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F LED tube light fitting 1 X 18 Watts decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230 Volts, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible Copper conductor cable with suitable size complete all as specified and directed. Make: Cat Part No LHEXBLP7UN1W018 of Havells or techno-commercially equivalent in approved makes
S&F LED street light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast Aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 Volts 200 Amps rated bus bar, neutral link, earth bar and Din rail, 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.
S&F 240 Volts, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amps, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
S&F MCB, Single Pole and neutral 240 Volts, SPN 40 to 63 Amps 10 KA 'C' series complete all as specified and directed.
S&F sub-main wiring of 4 Sqmm PVC insulated unsheathed FRLS cable multistranded Copper conductor with earth wire of 4.0 Sqmm PVC insulated unsheathed FRLS cable multistranded Copper conductor including PVC conduit pipe 25 mm dia complete all as specified and directed. Note: Two run of single core 4 Sqmm cable and one run single core 4.0 Sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length.
M&L sub-main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC Concealed with 1 x 6 Sqmm PVC insulated Copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated Copper conductor single core,one run of PVC conduit shall be measured as single run.
M&L earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm and 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5m below the ground level with top edge of earth plate at a depth not less than 1.5m below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. Provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate). The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete 1:2:4, type B-1 (using 20 mm graded stone aggregate), excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).
Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed.
M&L sand filling under floors, foundation or cable protection including spreding leveling in layer not exceeding 25cm thick complete all as specified and directed.
M&L Bricks, common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wide across the line of cable in trenches for protection of underground cable complete all as specified and directed.
M&L mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e mild steel clamps nuts & bolts etc as required complete all as specified and directed.
Supply and lay pipe galvanized, “Medium class”, including fitting 40 mm (1.5”) dia complete all as specified and directed.
All as per ser item No 143 here-in-before but 20 mm (3/4") dia.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 20 mm dia and fixed complete all as specified and directed.
M&L cutting existing CI/GI pipe 20/40/50/80 mm bore including run lead joints of suitable size with necessary fittings complete all as specified and directed.
B.L. Chaudhri and Co.
Manjeet Singh Contractor
M/s Mukand Lal Khanna
M/s Surjit Singh and bros
M/s Bansi Lal
R.S.ENTERPRISES
manoj and company
shivam builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .