COMPREHENSIVE B/R NATURE OF REPAIRS INCLUDING TILING, SANITARY FITTINGS, OTHER RELATED WORKS AND PERIODICAL SERVICES INCLUDING CAMOFLAUGE PAINTING IN POCKET No. 16 AT UNDER GE(A) JAISALMER

Amount

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified and as directed by the Engineer-in-Charge.

M & L for precast cement concrete solid block masonry exc 10cm in width and setting in CM 1:6 type C1, 1:3:6 complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15 mm thick(in two layers-first layer 10MM thick with readymix plaster and outer layer 5 mm thick readymix waterproof plaster) on outer wall walls by adding potable water by weight of material as mentioned by manufacturer. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1981, IS 2402-1963 and shall confirms the Compressive strength @ 28 Days- 10-15 Mpa/ Bulk density- 1600-1800 Kg/m3 and pull out bond strength->0.5MPA complete all as specified and as directed by the Engineer-in-Charge. Note : The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20MTR height all as specified and directed.

M&L for rendering 10 mm thick readymade plaster on internal walls by adding potable water by weight of material as mentioned by manufacturer. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1981, IS 2402-1963 and shall confirms the Compressive strength @ 28 Days- 10-15 Mpa/ Bulk density- 1600-1800 Kg/m3 and pull out bond strength->0.5MPA complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 5 mm thick readymix self curing plaster on ceiling by by adding potable water by weight of material as mentioned by manufacturer. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1981, IS 2402-1963 and shall confirms the Compressive strength @ 28 Days- 10-15 Mpa/ Bulk density- 1600-1800 Kg/m3 and pull out bond strength->0.5MPA complete all as specified and as directed by the Engineer-in-Charge.

M&L for Applying 1mm thick wall care putty on wall for desired smoothness and levelling of surfaces in two or more layers) for receiving painting complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of newly plastered surfaces and applying Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's pecification and two or more coats on new work complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying three coats of white wash on ceiling surface including prepration of new surface complete all as specified and as directed by the Engineer-in-Charge.

M&L for Chipping of slab/columns/ beams/chajjas /parapet /roof projection/ balcony/ staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brushes etc and disposal of debris for all lead and lifts complete all as specified and as directed by the Engineer-in-Charge. Note :- Scaffolding/ temporary support structure required to support the members / structure during strengthening shall be include in this items

M&L for applying bond coat cum waterproofing on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified mortar with two coats of Slurry- @ approximately 2- 2.5 m2 / litre depending on substrate porosity of Fosroc Nitobond SBR300 or equivalent Equivalent etc as per manufacturer specifications. Laying of reinstatement readymade plaster/polymer mortar shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete complete all as specified and as directed by the Engineer-in-Charge. Note : The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height.

M&L for applying to the damaged concrete portion of slab / columns / beams / chajjas / parapet /roof projection/ balcony/ staircase with single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitious patch repair mortar Sika monotop 122F (having the technical parameters mentioned in material specifications) capable of applying up to 20-30 mm thick in double layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness complete all as specified and as directed by the Engineer-in-Charge. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height.

Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

M&L 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floors complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

M&L for glazed vitrified tiles 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.36 Sqm not exceeding 0.72 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring / hard standing complete all as specified and as directed by the Engineer-in-Charge.

M&L for ceramic out door tiles 300mmx300mmx10mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 15 mm thick Cement Mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. Note : Work will be in patches or in bulk

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick,rubber moulded set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge.

M&L for glazed vitrified tiles 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.36 Sqm not exceeding 0.72 Sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M&L Glazed ceramic coloured tiles 7 to 8 mm thick in vertical surfaces area of each tile of exc. 0.11 Sqm and but not exc. 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M&L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by the Engineer-in-Charge.

All as per item No. 25.00 here-in-before above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed by the Engineer-in-Charge. Note : Work will be in patches or in bulk

M&L for Granite of Z black / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 16-18 mm thick, set and jointed in cement slurry over & including screed or 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and as directed by the Engineer-in-Charge. Note : Single piece should be used in steps/cills/jambs/shelves.

M&L for Jaisalmer stone for wall cladding (of any type) 35-55 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and as directed by the Engineer-in-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and as directed by the Engineer-in-Charge. Note : Work will be in patches or in bulk

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by the Engineer-in-Charge.

M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed by the Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified and as directed by the Engineer-in-Charge.

S&F MS hollow rectangular/square/circular tubes/pipes of (IS-1161-1979 grade SI-240) as in frame work for roofs/rafters/purlins/chajjas/trusses/ columns/ struts etc and like similar items etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for rolled mild steel work as in door frame (chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and as directed by the Engineer-in-Charge.

S&F Mild steel hold fasts fixed with MS screws, all conforming to Fe410-0 complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified and as directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ 'L' or 'J' type hook complete all as specified and as directed by the Engineer-in-Charge.

Raking out joint /pointing to random rubble or polygonal rubble stone masonary uncoursed or brought upto courses built in cement mortar and M&L for raised pointing in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge.

taking down shutters of any description exc 1.00 sqm but n. exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and as directed by the Engineer-in-Charge.

taking down shutters of any description exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed by the Engineer-in-Charge.

S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed by the Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification including the following complete all as specified and as directed by the Engineer-in-Charge. :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf

Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.20mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and incl mortice lock with duplicate keys etccomplete all as specified and as directed by the Engineer-in-Charge. including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Powder coated 50 microns extruded aluminium frame for fixed type partition (Standard two panel pattern) made out of powder coated aluminium section of size 63.5 x 38.10 x 1.5mm, comprising of 5mm thick tinted glass inserted in and including necesary jointing cleats, rubber packing, anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete incl taking down of existing partition with all fittings and fixtures complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed by the Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and lengthcomplete all as specified and as directed by the Engineer-in-Charge. Note:- (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made.

S&F 30mm thick Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by the Engineer-in-Charge and including supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf

Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing in repairs rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & length as required at site complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs mortice lock brass 4 levers vertical type with handle, size 100mm complete all as specified and as directed by the Engineer-in-Charge.

Dismantling boarding of any description fixed in any position with nails complete all as specified and as directed by the Engineer-in-Charge.

S&F factory made 18mm thick both side laminated HDHMR board in Cupboard made of minifix joint with 1mm same colour edge banding including fixed with nut, screws and washers fevicol, nails complete all as specified and as directed by the Engineer-in-Charge.

S&F factory made 12mm thick both side laminated HDHMR board in Cupboard made of minifix joint with 1mm same colour edge banding including fixed with nut, screws and washers fevicol, nails complete all as specified and as directed by the Engineer-in-Charge.

S&F powder coated stainless steel SS 304 sensys intergrated soft cose hinges of size 103x64mm finish of nicle/silver complete all as specified and as directed by the Engineer-in-Charge.

S&F powder coated stainless steel cabinet / drawers handle grade SS 304 having a length of 250mm and any shape complete all as specified and as directed by the Engineer-in-Charge.

S&F powder coated stainless steel drawer/ basket channel grade SS 304 size 50cm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod and including 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and as directed by the Engineer-in-Charge. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Dismantling of existing unserviceable RCC/PVC water tank and S&F 500 litre capacity rotational moulded polythene water storage tanks double layer white colour (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of existing unserviceable RCC/PVC water tank and S&F 1000 litre capacity rotational moulded polythene water storage tanks double layer white colour (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making good to floor etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Vitreous china premium/1st quality wash down water closet floor mounting EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Vitreous china premium/1st quality counter top wash basin, white, square or rectangular of size not less than 550x400x140 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by the Engineer-in-Charge. Note : The items for counter will be measured and paid separately.

S&F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair PVC flush pipe bend 32mm dia with two nos check nuts for connecting low level flushing cistern to European type WC or IWC including all joints complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair angle valves 15mm bore , cast copper alloy chromium plated fancy type, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F in repairs 15mm bore Brass CP kitchen sink mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 32mm dia PTMT waste pipe suitable for WHB, urinals or Sinks etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs SS grating square/round 150x150mm size as per required shaped with cocroach trap for floor trap fixed in position complete all as specified and as directed by the Engineer-in-Charge. Make :- cera cat No CP134 or equivalent make and model as approved by GE.

S&F in repair bib tap standard of PTMT 15mm bore of any colour screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to rigid UPVC waste pipe bent to shape & fixed to wall with bracket overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs stainless steel plate rack of 600X750X250mm model No FQ 9206160 fixed to wall complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs waste coupling CP 40 mm dia for sink etc with long screwed shanks and fly nuts flanged etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 15mm bore cast copper alloy chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Towel Ring of CP brass fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair tubular towel rail, chromium plated brass 20mm dia 'D' type 60CM long between flanges complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook complete all as specified and as directed by the Engineer-in-Charge. Make :- Cera cat No F500110 or Jaquar/ Hindware/ Prayag/ Parryware or equivalent model as approved by GE.

S&F in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc. complete all as specified and as directed by the Engineer-in-Charge. Make :- cera cat part No F5001114 or Jaquar/ Hindware/ Prayag/ Parryware or equivalent model as approved by GE.

S&F in repair corner glass shelf size 300 mm radius with and including bracket and glass complete set etc complete all as specified and as directed by the Engineer-in-Charge. Make :- cera cat part No F50051303 or Jaquar/ Hindware/ Prayag/ Parryware or equivalent model as approved by GE.

S&F in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, chromium plated fancy type glossy finish fixed to wall complete all as specified and as directed by the Engineer-in-Charge. Make:- cera cat part No. F-1015163 or Jaquar/ Hindware/ Prayag/ Parryware or equivalent model as approved by GE.

S&F 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified and as directed by the Engineer-in-Charge.

S&F 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections complete all as specified and as directed by the Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) 75mm bends any radius complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) 110mm bends any radius complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) branch piece 75mm, single (single Y) equal or unequal with access door complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) branch piece 110mm, single (single Y) equal or unequal with access door complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 75mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 110mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and as directed by the Engineer-in-Charge.

Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete all as specified and as directed by the Engineer-in-Charge.

Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4-6mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, complete all as specified and as directed by the Engineer-in-Charge.

S&F solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all respect including supply and fixing of all accessories like fasteners/screws/solvent and PVC running strip for fixing of wall lining etc all as recommended by manufacturer complete all as specified and as directed by the Engineer-in-Charge. Note :- colour/pattern as approved by Accepting Officer.

S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified and as directed by the Engineer-in-Charge.

M&L Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by the Engineer-in-Charge.

M&L Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on wall complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plastered surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying two coat of white wash on wall incl complete removal of existing treatment complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plastered surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying two coat of white wash on ceiling incl complete removal of existing treatment complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorated surfaces (plastered or unplastered) and applying three coat of white wash on the surfaces of ceiling including complete removal of existing treatment complete all as specified and as directed by the Engineer-in-Charge.

M&L for washing/rubbing down and stopping of distempered, plastered and painted surface of wall including cornices etc and making good of holes by filling holes in plastered surfaces with POP mixed with distemper with and applying one coats of acrylic distemper complete all as specified and as directed by the Engineer-in-Charge.

M&L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of acrylic distemper oil emulsion on wall surfaces to achieve smooth surface without visiable of brush/hair mark including complete removal of existing treatment complete all as specified and as directed by the Engineer-in-Charge.

M&L for complete removal existing treatment and applying 1mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of acrylic distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for prepartion of old painted wood or wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10 cm width girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L perpartion of old existing wall surfaces including cornices, plastered or un-plastered surfaces by brooming down or steel wire brushing, moss efflorescent salt and trading oil and greasy spots and applying two coat of cement base paint over and including complete removal of exixting tretment & filling up of holes by wall care putty wherever required complete all as specified and as directed by the Engineer-in-Charge.

M&L for painting circle of 200mm dia on surface of wall with two coats of synthetic enamel paint (black) & writing building number (eg-P-45 or P-80 etc) with synthetic enamel paunt (white) with hight of latter 125mm and width 10mm complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying Two coats on wall or over ceiling (any camoflauge pattern as approved by GE) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces after complete removal of exixsting treatment and preperation of the surfaces complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for preparation of and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including complete removal of existing treatment and preperation of old surfaces completed all as specified and as directed.

KHUSBU CONSTRUCTION COMPANY (BID ID -3498353)

M/s Shri Inder Construction Company (BID ID -3495849)