SPL REPAIR/ RENOVATION TO INTERNAL FLOORING AND RCC ROOF PROJECTION/ FACIAS OF KV NO - 02 JALANDHAR CANTT

Amount

Demolition of cement concrete including terrazo topping complete all as specified and directed.

Material and labour for 20-25 mm thick machine cut kota stone slab 550mm x 550mm of minimum size flooring over and incl 20mm thick screed bed in cement mortar 1:4, roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry @ 3 kg/sqm with pigments to match the shade of slab including cutting, rubbing and mirror / granite finish polishing complete all as specified and directed.

All as per Ser item No 2.00 above but on vertical surfaces such as skirting dado, riser etc over and incl 10 mm thick cement plaster in cement mortar 1:4 as in back coats complete all as specified.

Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified.

M&L White Marble (Makrana white) 20mm thick machine cut, bedded jointed and pointed with neat cement slurry and pointed with white cement including cutting and polishing including 15 mm thick screed bed in cement mortar 1:4 (Only for Borders lines)

M&L for 20 to 25 mm thick machine cut kota stone slab for treads (Single piece stone) & landings of stair cases over and incl 15mm thick bedding layer in cement mortar 1:4 with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polishing complete all as specified and directed by Engr-in-Charge. (Length of tread not less than 1.40 mtrs).

All as per ser item No 6.00 above but on vertical surfaces such as riser (Single piece stone) etc over and incl 10 mm thick cement plaster in CM 1:4 as in back coat rough finished surface to receive slab complete all as specified. (Length of riser not less than 1.40 mtrs)

Rounding/moulding to edges of Kota stone slabs/marble stone/granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etc complete all as specified.

M&L Granite (Lakha Red) 18-20mm thick machine cut, bedded in 15 mm thick screed in cement mortar 1:6 and jointed with neat cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

All as per Ser item No 9.00 above but on vertical surfaces such as skirting dado, riser etc over and incl 10 mm thick cement plaster in cement mortar 1:4 rough finished surface as in back coat to receive tiles complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposal of rubbish outside MOD land complete all as specified

M&L double charged vitrified coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles (Size 1200 mm x 600 mm), in floors including screed bed 15 mm thick in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles all as specified.

All as per Ser item No 12.00 above but in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles including back coat of 10 mm thick in cement mortar 1: 4 complete all as specified and directed.

Demolition of reinforced cement concrete of roof projections and downward facias in any position complete all as specified and directed. (Working height = Not less than 6.00 mtrs)

M&L TMT bars 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends or welding where necessary and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-In-Charge. (Working height = Not less than 6.00 mtrs)

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges and all the supports required to make the formwork firm and stable to take the load of the casting, complete all as specified and directed. (Working height = Not less than 6.00 mtrs)

M&L for Reinforced Cement concrete 1:2:4 (Nominal mix) Type B0 (using 12.50 mm graded stone aggregate as in chajjas, downward facias and similar works all as specified and directed. (Working height = Not less than 6.00 mtrs)

M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surface (On item no: 18 above) finished even and smooth without using extra cement all as specified. (Working height = Not less than 6.00 mtrs)

M&L for preparing new plastered or unplastered wall surfaces and applying two coats of exterior emulsion paint to match the existing colour scheme over one priming coat all as specified and directed by Engr-in-charge. (Working height = Not less than 6.00 mtrs)

BHARAT ENTERPRISES

B.P CONSTRUCTION CO

PAUL CONSTRUCTION CO.

M/S Kuldip Construction Co.

S S CONSTRUCTION

GORAYA AND CO

M/s Nirmal Singh and Co.

nitin trading company