DG BUTIBORI M and R to PWSS at Butibori Industrial

Amount

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 400 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Dismantling& Removal of 240 HP V. T. Pump set with Bowl Assembly, Column Assembly, Discharge Head, Motor, 450 mm dia. Sluice valve & Reflux Valve etc. (Mechanical Material). Shifting & Transportation of 240 HP V. T. Pump set with Bowl Assembly, Column Assembly, Discharge Head, Motor, 450 mm dia. Sluice valve & Reflux Valve etc. (Only Mechanical Material) from old Pump house to New Pump House.Installation & Commissioning of 240 HP V. T. Pump set with Bowl Assembly, old Column Assembly , Discharge Head, Motor, 450 mm dia. Sluice valve & Reflux Valve etc. (Mechanical Material).

Dismantling & Removal of 240 HP L. T. Control Panel from Old Pump House by removing by dismantling cables , necessary equipments , Shifting & Transportation of 240 HP L. T. Control Panel from Old Pump house to New Pump House. Installation & Commissioning of 240 HP L. T. Control Panel in New Pump House including all the necessary connections complete.

Supplying and erecting iron work, sheet metal work consisting of MS sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.

Providing , Erecting & commissioning of new connecting pipes for 240 HP pumps made of 8 mm thick M S pipe of required dia including all fabrication & machining complete.

Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department‘s approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia. PW 6-8) 450 mm dia Joint

Supplying, installing and testing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all accessories of copper materials & recording the results as per specification no. EA-EP

Supplying and erecting copper strip of required sizes used for earthing on wall and/or any other purpose with necessary clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP.

FRIENDS ENGINEERING CORPORATION (BID ID -6614286)

Kevla Engineering (BID ID -6614319)