REPAIR/ MAINT TO UNSV POINT WIRING MODULAR FITTINGS AND FIXTURES MODULAR SWITCHGEARS HAND DRIERS MOTORISED AIR CURTAINS AND OTHER MISC E/M WORKS AT CGDA HQ AND CENTRAD UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Taking down carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell) complete, including unscrewing from board out let boxes, fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder brackets, ceiling/ wall light fittings and regulators etc and making good disturbed surface of walls, floors, etc. complete all as specified and as directed.

Taking down, shifting and refixing carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell), including unscrewing from board out let boxes, fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder brackets, ceiling/wall light fittings and regulators etc and making good disturbed surface of walls, floors, etc. complete all as specified and as directed. Note:- Quoted Rates shall be inclusive of supply and fixing up to 1.5 metre Casing capping, suitable size of wire, same as existing wire, sunken type pressed steel terminal boxes of required size with 3mm thick Bakelite steel white/coloured top cover, for extension of point wiring.

M&L for point wiring, with 1.5 Sqmm, single core, multi stranded, copper conductor PVC insulated, FRLS, unsheathed cable, 1100 Volts grade, drawn through and including PVC casing, capping with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc, including sunken type pressed steel terminal boxes of size with 3mm thick Bakelite steel white/ coloured top cover, including 1.5 Sqmm size PVC insulated, unsheathed, copper earth continuity conductor to common earth and connecting to earth dolly suitable for the following complete all as specified and as directed:-

One light/ fan point, controlled by one switch, 5 Amps, one way, single pole.

One bell point controlled by one switch, 5 Amps, one way, single pole.

One 3 Pin, socket out let, 5 Amps, on the same board.

One 3 pin, socket out let, 5 Amps, on the independent board.

All as per item No. 3.00 here in before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire with 2.5 Sqmm single core cable for one 3 pin, 15 Amps socket out let point on independent board complete all as specified and as directed.

S&F in repair switch piano flush type, 230 Volts, 5 Amps, single pole complete all as specified and as directed.

S&F in repair Socket outlet 3 pin, 5A, flush type, 230 Volts complete all as specified and as directed.

S&F in repair Switch socket combination, 5 in 1, 3 pin, 5 and 15 Amp, flush type universal, 230 Volts complete all as specified and as directed.

S&F in repair bell push, 5 Amps, flush type complete all as specified and as directed.

S&F in repair bell, Ding dong, AC, 230V complete all as specified and as directed.

S&F in repair switch piano flush type, 230 Volts, 15 Amps, single pole complete all as specified and as directed.

S&F in repair Modular switch, one way, 10 Amp, 230 Volts, 1 module complete all as specified and as directed. Make : Anchor Roma 66101 or equivalent Model of Make mentioned in PS.

S&F in repair Modular switch, 16/20 Amp, 230 Volts, 1 module complete all as specified and as directed. Make : Anchor Roma 66104 or equivalent Model of Make mentioned in PS.

S&F in repair Modular socket, 6/10 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed. Make : Anchor Roma 66403 or equivalent Model of Make mentioned in PS.

S&F in repair Modular socket, 16/20 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed. Make : Anchor Roma 66405 or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, cover plate with frame, 1 module complete all as specified and as directed. Make : Anchor Roma 66901WH or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, cover plate with frame, 2 module complete all as specified and as directed. Make : Anchor Roma 66902WH or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, cover plate with frame, 3 module complete all as specified and as directed. Make : Anchor Roma 66903WH or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, cover plate with frame, 4 module complete all as specified and as directed. Make : Anchor Roma 66904WH or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, cover plate with frame, 6 module complete all as specified and as directed. Make : Anchor Roma 66906WH or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, cover plate with frame, 8 module complete all as specified and as directed. Make : Anchor Roma 66908WH or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, blank plate, 1 module complete all as specified and as directed. Make : Anchor Roma 66604 or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, blank plate, 2 module complete all as specified and as directed. Make : Anchor Roma 66644 or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, step Fan regulator, 100 watt, 2 module complete all as specified and as directed. Make : Anchor Roma 66503 or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, RJ11, telephone Jack, single with shutter, 1 module complete all as specified and as directed. Make : Anchor Roma 66551 or equivalent Model of Make mentioned in PS.

S&F in repair flexi bell, the wireless door bell with no interference including all accessories like remote and Batteries complete all as specified and as directed. Make : Anchor Model 22740 or equivalent Model of Make mentioned in PS.

S&F in repair Modular white, TV socket outlet single, 1 module complete all as specified and as directed. Make : Anchor Roma 66602 or equivalent Model of Make mentioned in PS.

S&F in repair uni Switch socket combination, with box, with 2 fixing holes, 5 in 1, 3 pin, 20 Amps and 10 Amp, flush type universal, 240 Volts complete all as specified and as directed. Make: Anchor PENTA Model 14616 or equivalent Model of Make mentioned in PS.

S&F in repair 6 Amps, 3 pin, Super Plug top complete all as specified and as directed. Make: Anchor Model 39571/51348 or equivalent Model of Make mentioned in PS.

S&F in repair 16 Amps, 3 pin, Super Plug top complete all as specified and as directed. Make: Anchor Model 39582/51395 or equivalent Model of Make mentioned in PS.

S&F in repair 6/10/13 Amps, Spike Guard, with 4 Nos sockets along with one indicator, controlled by single switch, with overload protection, voltage Surge protection, moulded plug confirming to relevant IS, with 1.5 Metre, 3 core, 2.5 Sqmm insulated copper wire, versatile socket compatible with multi plug special slot to hang product vertically complete all as specified and as directed. Make Anchor Cat Part No 22670/22648 or equivalent Model of Make mentioned in PS.

S&F in repair Isolator SP/MCB 230 Volts, 6 to 32 Amp, suitable for fixing in existing DBs complete all as specified and as directed.

S&F in repair Isolator, TPN, 415 Volts, 63 Amp suitable for fixing in existing DBs complete all as specified and as directed.

S&F in repair MCCB, TPN, 100 Amps, 415 Volts, breaking capacity 16 KA complete all as specified and as directed.

S&F in repair MCCB, TPN, 125 Amps, 415 Volts, breaking capacity 16 KA complete all as specified and as directed.

S&F in repair MCCB, 4 Pole, 160 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed.

S&F in repair MCCB, 4 Pole, 200 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed.

S&F in repair MCCB, 4 Pole, 250 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed.

S&F in repair Bi-pin Holder suitable for 18/24/36 fluorescent tube light fitting complete all as specified and as directed.

Taking down ceiling fan/cabin fan/Duct fan of any sweep and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, rewinding complete, re-assembling the ceiling fan complete including greasing, oiling, testing the same & making the fan serviceable and re-hanging and connecting with the ceiling rose complete all as specified and as directed. Note: Rewinding, bush, bearing, capacitor, twin core, flexible cable shall be measured and paid for separately under respective item of this Schedule.

All as per item No 39.00 here in before but for exhaust fan 300/450mm sweep, any type complete all as specified and as directed.

M&L in replacement Re-winding of ceiling fan motor of any type and size, using copper winding wire of same as existing gauge including replacement of insulated paper, varnishing, including cleaning/greasing, including removing old burnt wire complete all as specified and as directed.

All as per item No 41.00 here in before but for pedestal fan/cabin fan/duct fan, 350/400/450mm sweep, any type complete all as specified and as directed.

All as per item No 41.00 here in before but for exhaust fan 300/450mm sweep, any type complete all as specified and as directed.

All as per item No 41.00 here in before but for duct type exhaust fan, any type complete all as specified and as directed.

Supply only in repair ball bearing for 1200mm sweep ceiling fan as required at site complete all as specified and as directed. Make:-SKF/TATA/FAG.

Supply only in repair ball bearing for 300/450mm sweep exhaust fan/duct fan as required at site complete all as specified and as directed. Make:-SKF/TATA/FAG.

Supply only in repair gun metal bush for 300/450mm sweep exhaust fan as/duct fan required at site complete all as specified and as directed.

Supply only in repair rubber insulator Heavy duty with bolts nuts & split pin etc complete for 1400/1200mm sweep ceiling fan complete all as specified and as directed.

Supply only in repair capacitor of 2.5 MFD for Ceiling/ Exhaust fan complete all as specified and as directed.

Supply only in repair capacitor of 4 MFD for Ceiling/ Exhaust fan complete all as specified and as directed.

Supply only in repair down rod 12mm dia made out of high density mild steel 900mm long as per approved sample complete all as specified and as directed.

Supply only in replacement ceiling fan hanging clamps with rubber insulator and two Nos nuts and bolts complete all as directed.

S&F in repair pedestal fan/cabin fan blade any sweep, suitable for existing fan complete all as specified and as directed.

S&F in repair fluorescent Tube rod 36/40 Watt, 230 Volt complete all as specified and as directed.

S&F in repair fluorescent Tube rod 18/20 Watt, 230 Volt complete all as specified and as directed.

S&F in repair Tube rod 14 Watt, 230 Volt, T-5 type, complete all as specified and as directed.

S&F in repair Power saving LED light fitting, 9 Watt, 2 feet (Approx), 230 Volt complete all as specified and as directed. Make: Havells Cat No LUMILINEBS9WLED865SPCWH or equivalent Model of Make mentioned in PS.

S&F in repair Power saving LED glow batten, 4 step dimming fitting light 18/20 Watt, 4 feet (Approx), 230 Volt, turn off and on in 5 second with a click of switch complete all as specified and as directed. Make: Havells Cat No LHEXBLP7JN1W018 or equivalent Model of Make mentioned in PS.

S&F in repair decorative ultra slim, round profile, LED light fitting, with extruded polycarbonate, environment friendly, energy Power saving, LED glow batten fitting light 20/22 Watt, 4 feet (Approx), 230 Volt complete all as specified and as directed. Make: Havells Cat Part No LHEXBLP7PN1W020 or equivalent Model of Make mentioned in PS.

S&F in repair Power saving LED Colour changing Batten light fitting, 20/22 Watt, 4 feet (Approx), 230 Volts, turn off and on in 5 second to change colour complete all as specified and as directed.

S&F in repair Ballast electronic slim 1X36/40 Watt complete all as specified and as directed.

S&F in repair Ballast electronic slim 1X18/20 Watt complete all as specified and as directed.

S&F in repair Ballast electronic slim 4X14 Watt complete all as specified and as directed.

S&F in repair Universal starter for 110V/230V/240 V, 18 W/20 W/36 W/40 W/65 W/80 W FTL & 18/36 W FP-L (CFL) complete all as specified and as directed.

S&F in repair CFL, 18 Watt, 4/2 pin, 230 Volts complete all as specified and as directed.

S&F in repair non retrofit CFL, 4 pin, PL type, 36/40 Watt, cool day light, 230 Volts complete all as specified and as directed.

S&F in repair CFL, 18 Watt, 3U or spiral, E27 cap, 230 Volts complete all as specified and as directed.

S&F in repair CFL, 11 Watt, 3U or spiral, E27 cap, 230 Volts complete all as specified and as directed.

S&F in repair GLS lamp, 25/40 Watt, E 14 small screw cap/E 27 cap, 230 Volts complete all as specified and as directed.

S&F in repair 6 Watt, LED capsule/LED GU 10 /GU10C /candle LED SES, E-14 small screw cap, 230 Volt or as required as per site requirement complete all as specified and as directed.

S&F in repair HF/ballast, made of engineering plastic, 0.9 PF, not for industrial use, slim blast, suitable for 18 /13/11 Watt, D type CFL/ FTL lamps complete all as specified and as directed.

S&F in repair, E-27/E-40, threaded lamp holder suitable for garden light fittings complete all as specified and as directed.

S&F in repair LED Lamp, 0.5 Watt, 230 Volts complete all as specified and as directed.

S&F in repair LED Lamp, 9 to 12 Watt, 230 Volts complete all as specified and as directed.

S&F in repair LED Lamp, 18 Watt, 230 Volts complete all as specified and as directed.

S&F in repair PVC insulated, 1.50 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.

S&F in repair PVC insulated, 2.50 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.

S&F in repair PVC insulated, 4.0 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.

S&F in repair PVC insulated, 6.0 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.

M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paint by spray paint to steel tubular pole of height above 7 Metre up to 11 metre, including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all as specified and as directed.

M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paint by spray paint to steel tubular pole up to 7 metre height including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all as specified and as directed.

S&F in repair CFL Lamp, 85 Watt, B22 cap, 230 Volts, suitable for garden light poles complete all as specified and as directed.

S&F in repair 100 Watt, New generation, energy saving and environmental friendly, long life, LED Street Light fitting, made out of pressure die cast aluminium housing, with high power LED as lighting source with toughened glass top cover, top opening, separate driver compartment, with IP66 protection, impact resistance of IK07, with 10KV Built-in Surge Protection Device complete all as specified and as directed. Make: Havells, Cat Part No. - ENDURAPEARLMAGNUMSL100WLED757PASYTOTGAST or equivalent Model of Make mentioned in PS.

S&F in repair Environment Friendly, Exclusive innovative, 50 Watt, LED Flood Light luminaries, with high power COB LEDs as light source, class I IP65 protection, die-cast aluminium housing and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. - JETA QUANTOPLUSFLP50WLED757SYMLENS or equivalent Model of Make mentioned in PS.

S&F in replacement Black aluminium outdoor, wall light, with tempered glass, with B22 holder and plug, including 9 Watt LED Lamp, including all accessories suitable for Decorative Gate lighting to match with the existing light complete all as specified and as directed.

S&F in repair Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 200 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. - JETA VALOURFL200WLED757PINTWBLT G or equivalent Model of Make mentioned in PS.

S&F in replacement Automatic Hand Dryer with Heating element and Hot/Cold Switch and with the following specifications : Body Material : ABS Plastic (White), Finish : white, Mounting : Wall Mounting, Operation : Fully Automatic, Motor : Brush AC type, Power : 1000W, Voltage : 220V/50Hz, Current : 0.9A, Water Splash Proof : IPX1, Blowing Volume : 90 Cum/Hour, Time Protection : 60 Seconds auto cut-off, Sensing Range : 20cm +/‐ 5cm, Air Speed : 35 +/- 2 m/s, 18000RPM, Drying Time : >20 Sec, Noise Level : 75DB, Dimension : 255x145x130mm complete all as specified and as directed. Note: Old Hand dryer shall be deposited by the contractor in MES Store Yard.

S&F in repair Pull Cord Switch or rotary Switch, 5 Amp, 250 Volt, one way, to ON and OFF the indicator lamps complete all as specified and as directed.

S&F in repair Brass lamp holder (batten type/ pendent type/Brass Back plate Lamp Holder/Burfi holder etc), base cap B22/E-14/E-27 as required at site complete all as specified and as directed.

S&F in repair recessed type, 34W to 36W, Full window glare free, opal Diffuser LED Panel light fitting, size 595X595mm, suitable for Existing false ceiling, with MS Powder coated White Housing, total system Lumen of 34W to 36W LED shall be 3800 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD (%) < 10, LED Lamp Efficacy>140 Lm/W with Average life of 50000 Burning hours, Complete with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No.- VENUSNEOHE2X2PLR18-42WLED830MOD, Driver Model LEDDRIVER36V36WS/ Philips Cat Part No- RC380B LED36S -6500 G4 L60 W60 PSU OD or equivalent Model of Makes Mentioned in PS.

S&F in repair recessed type, 15W LED Round Down light with pressure die-cast aluminium heat sink & glare free opal Diffuser of size 160mm Dia (Approx) . Total system Lumen of 15W to 18W LED should be 1400 or above in Cool day Light (5600K to 6000K), Power factor>0.95, CRI>80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - EDGEPRORDDLR15WLED857S/ Philips Cat Part No - DN 394B LED16S-6500 PSU WH or equivalent Model of Makes Mentioned in PS.

S&F in repair Recessed type, 15W to 18W, Full window glare free, opal Diffuser, LED Panel light fitting, size 300X300 mm (Approx) with MS Powder coated White Housing, total system Lumen of 15W to 18W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTO1X1PLR15WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement LED decorative post Top lantern, 25Watt, including all accessories, complete fixing accessories and clamp, including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavation as per manufacturer's instruction complete all as specified and as directed. Make:- CG, Cat Part No:- LPTSA-30-T or equivalent Model of Makes Mentioned in PS.

S&F in replacement LED decorative post Top lantern, 35Watt, including all accessories, complete fixing accessories and clamp, including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavation as per manufacturer's instruction complete all as specified and as directed. Make:- CG, Cat Part No:- LPTOI-45- CDL/T or equivalent Model of Makes Mentioned in PS.

S&F in repair Heat Pillar (Portable Heaters), Mild steel body, 1500 Watts, with twin quartz tube for direct heating, safety tip over switch cuts off the heater in case it is tilts or falls, two heat setting (400 Watt/800 Watts) for maintaining desired room temperature, powder coated finish to prevent corrosion, operating on 230 Volts, AC, 50 Hzs complete all as specified and as directed.

S&F in replacement LED decorative, wall mounting, light fitting, with plastic body, suitable for B22 type LED/CFL lamp, with opal white, PC diffuser poetics for glair free light, including mounting brackets etc complete, including one No 9 Watt LED Lamp complete all as specified and as directed. Make:- Havells Model Stylo Wall Light cat No LHFOECE1TZ1O014 or equivalent Model of Makes Mentioned in PS.

Supply only DHPP 'N' for running DG sets installed at Power House of CGDA complex and CENTRAD from nearest Petrol Pump complete all as specified & as directed. Note: The DHPP 'N' stock shall be maintained at least 2000 Litre within 15 days from date of commencement of work and further shall be top up as per requirement bases and as directed by Engr-in-Charge. A penalty of Rs 1000.00 per day shall be imposed on the contractor, if minimum stock levels are not maintained within 24 Hours of demand raised by Engr-in-Charge. Strict compliance shall be ensured to avoid failure of standby supply due to non availability of DHPP 'N'.

S&F in repair digital Voltage Stabilizer of capacity 1 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +2.5% complete all as specified and directed. Make: V-Guard Model No :- VGSD 50 or equivalent model of Bluebird/ Emerson/ any other make Mentioned in PS. Note: Old Voltage Stabilizer shall be deposited by the contractor in MES Store Yard.

S&F in repair digital Voltage Stabilizer of capacity 2 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% complete all as specified and directed. Make: V-Guard model No VGSD 100 or equivalent model of Bluebird/ Emerson/ any other make Mentioned in PS. Note: Old Voltage Stabilizer shall be deposited by the contractor in MES Store Yard.

S & F in replacement PVC body Exhaust fan, 250 mm sweep ,1200 RPM, 5 blade, off white, 240 Volt, with louver shutter, including necessary connection with flexible PVC Copper cable, 3 core, size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and as directed. Note: Old Exhaust Fan shall be deposited by the contractor in MES Store Yard.

Taking down geyser from its existing position for general cleaning/overhauling, cleaning and descaling the tank and assembly with suitable detergent and making fully serviceable and refixing in new/old position complete with testing all as specified and as directed. Note: Spare parts required to be replaced shall be measured and paid for separately as "Supply only" under respective item of this Schedule.

Supply only in replacement fusible plug type (pressure valve) Air release valve complete all as specified and as directed.

Supply only in replacement air release valve (Nozzle) as per sample complete all as specified and as directed.

Supply only in replacement gasket of thickness 5 mm for geyser assembly of 06 holes/ 08 holes / 09 holes complete all as specified and as directed.

Supply only in replacement Syphen assembly of copper, 06/ 08/ 09 holes with nut bolts/stud/washer complete all as specified and as directed.

Supply only in replacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin & earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and as directed.

Supply only in replacement indicating lamp for geyser rectangular type/round type complete all as specified and as directed.

Supply only in replacement brass, chromium plated, fancy type angle valve with elegant knob, screwed down, high pressure, screwed both ends for 15 mm bore Iron pipe or for union including CP cap complete all as specified and as directed.

Supply only in replacement cast copper alloy, chromium plated, Stop valves, screwed down, high pressure, with elegant knob, with long shank and cup (Concealed type), screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.

Supply only in replacement Bib tap, cast copper alloy, chromium plated, fancy type, with elegant knob, long nose, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, including CP cap complete all as specified and as directed.

All as per Srl item No 110.00 here in before but suitable for 20mm bore pipe complete all as specified and as directed.

Supply only in replacement 50mm long, brass, Chrome plated extension nipple/pieces, suitable for 15mm bore pipes complete all as specified & as directed.

S&F in replacement 15mm bore GI tubing, medium grade, laid in floor/roof, including all GI fittings and cutting the existing pipe and making connection with new pipe including proper clamping with MS hooks complete all as specified & as directed.

Supply only in replacement 600mm Long PVC connection pipe, heavy duty, with CP brass nuts, suitable for 15mm bore pipes complete all as specified and as directed.

Supply only in replacement 450mm Long PVC connection pipe, heavy duty, with CP brass nuts, suitable for 15mm bore pipes complete all as specified and as directed.

Supply only in replacement industrial type metal clad socket 20 Amp, 2 pin & Earth, 240 volts complete all as specified and as directed.

Supply only in replacement industrial type metal clad Top 20 Amp, 2 pin & Earth, 240 volts complete all as specified and as directed.

Supply only in replacement inner shell of Geyser of capacity 25 Litre made out of steel tank complete all as specified and as directed.

All as per Srl item No 118.00 here in before but capacity of Geyser 35 Litre complete all as specified and as directed.

All as per Srl item No 118.00 here in before but capacity of Geyser 50 Litre complete all as specified and as directed.

S&F mild steel dash fastener, 150 mm long x 10 mm dia with pin and bolts complete for hanging of geyser properly on wall and making good he disturbed surfaces including plastering and white washing etc complete all as specified and as directed.

M&L preparation of outer body of geyser by knotting and stopping of outer surface and repainting the complete outer surface of geyser with one coat of synthetic enamelled paint 1st quality including taking down geyser from existing location and refixing the same on wall on same or other location and writing "GE E/M BHDC" of letter size 10 mm complete all as specified and as directed.

M&L for unscrewing the nut bolt and taking out the base plate geyser assembly and copper tank, making soldering and brazing of tank to stop the leakage of tank and fixing back in the position of geyser complete all as specified & as directed.

Supply only in replacement outer body of Geyser of Capacity 25/ 35/ 50 Litre, made out of 20 SWG MS Sheet duly spray painted complete all as specified & as directed.

Supply only in replacement Thermostat, (adjustable type), suitable for water heater/Geyser, AC, 230V complete all as specified and as directed. Make- THEETA/BAJAJ/RECOLD/DASPASS (as per site requirement/ sample)

Supply only in replacement heating element 1.5 KW (round type) with rubber gasket suitable for water heater/Geyser, AC, 230V complete all as specified and as directed. Make- THEETA/BAJAJ/ RECOLD/ DASPASS (as per site requirement/ sample)

All as per item No.126.00 here in before but round type 2 KW complete all as specified and as directed.

All as per item No.126.00 here in before but triangle type 1.5 KW complete all as specified and as directed.

All as per item No.126.00 here in before but triangle type 2 KW complete all as specified and as directed.

Supply only in replacement brass, chromium plated, fancy type angle valve, 2 in 1 (Two outlets with independent knobs & one inlet), with elegant knob, screwed down, high pressure, screwed both ends for 15 mm bore Iron pipe or for union including CP cap complete all as specified and as directed.

S&F in repair 25 Litres capacity, 5 Star rated, electric Storage Water Heater body, Features: outer body-ABS, Safety feature-Multi function safety valve, thermostat, thermal cut-out, vitreous enamelled glass line tank with CRCA outer body with powder coated with heavy duty anode rod prevent from corrosion & permanent scaling with adjustable knob for temp setting between 30°C to 75°C, high density PUF for thermal insulation with LED power indication, technical specifications: voltage-230V, Type-storage, Frequency-50Hz, Wattage- 2 Kilo Watts, Pressure-8 Bar, Pressure Class- Class 1, Shock-Safe power cord with 3 pin plug complete all as specified and as directed.

Supply only in replacement Geyser Installation Kit, Suitable for all kinds of water heaters / Geysers, 1 Litres to 100 Litres, Kit Includes 2 Nos ( or 1 Pair) of flexible Connection Pipes Premium Steel Ribbed, Bolts (Coach Screws) & washers / Connection Nipple / 15A Plug / Teflon Tape / Angle Valve Brass etc complete all as specified and as directed.

S&F in repair Hot air blower, Heat convector, 2 KW capacity, with blower and temp control mechanism and indications, operating on 230V, AC, 50 HZ complete all as specified and as directed. Make Usha Model No 812T Black or equivalent model of V Guard/ Havells/ Bajaj.

S&F in repair flying insect killer (mosquito/ Fly killer), metal type (65x21.5x35) cm, 15 watt, 03 Nos tube, fully automatic, 230V, AC, 50 HZ complete all as specified and as directed. Make V Guard/ Havells/ Bajaj.

S&F in repair Surface mounting type, 15W Aesthetically designed 1x1 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 15W to 18W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTOSURFA CE1X1PLS15WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in repair Surface mounting type, 42W Aesthetically designed 2x2 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 42W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTOSURFA CE2X2PLS42WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in repair Surface mounting type, 34W Aesthetically designed 1x4 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 34W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTOSURFA CE4X1PLS34WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in repair Surface mounting type, 24W Aesthetically designed 1x4 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 24W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHEAAKP7IL1W024 or equivalent Model of Makes Mentioned in PS.

S&F in repair tuneable RGB, smart, colour changing bulb, with B-22 Cap, including all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHLDAMED3W8R009 or equivalent Model of Makes Mentioned in PS.

S&F in repair 4 watt, 5000K, white, DESKLITE SLEEK WITH ADJUSTABLE LAMP SHADE AND CONNECTING ROD WITH FLEXIBLE TURNING MANUAL SWITCH with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHEXBVP7SN1W005 or equivalent Model of Makes Mentioned in PS.

S&F in repair Decorative surface mounting dome shaped pendant in green & black finishes, with 7.5watt, A60, LED Filament Lamp Black, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No -LHFHDPE1TN1K020 or equivalent Model of Makes Mentioned in PS.

S&F in replacement desert coolers aluminium fan blade of 18 inch /20 inch sweep (as per sample at site) complete all as specified and as directed.

S&F in replacement 15 mm dia PVC flexible pipe of superior quality for connecting pump and water distributer as per sample complete all as specified and as directed.

S&F in replacement PVC elbow/4 way of 15 mm bore distribution cross as per sample complete all as specified and as directed.

S&F in replacement PVC insulated, multi stranded, 3 core, flexible, copper conductor cable, of size 0.5 Sqmm complete all as specified and as directed.

S&F in replacement wood wool pad (01 set comprising of 03 Nos pad of Approx weight 700-750 gms each) suitable for 18 inch to 24 Inch sweep desert cooler complete all as specified and as directed.

S&F in replacement front grill for desert cooler of approved make (as per sample) complete with 5 Amp switch with three step speed regulator including indicating lamp complete all as specified and as directed.

S&F in replacement Fan motor for desert cooler 18 to 24 inch, single phase, 50 Hz, 230V, AC, Max Amp 1.5, suitable for existing desert cooler, of approved make (as per sample) complete all as specified and as directed.

S&F in replacement Submersible pump, 45 Watt, 230 Volts, single phase, AC, for desert cooler including replacement of GI nuts, bolts complete all as specified and as directed.

S&F in repair switch piano flush type, 230 Volts, 5 Amps, single pole suitable for water pump of desert cooler complete all as specified and as directed.

S&F in repair Mounting bracket for fan motor of desert cooler, with nut & bolt etc. to match with the existing complete all as specified and as directed.

S&F repair Capacitor 4 Mfd + 5%, 440V, MPP ‘SH’, for desert cooler complete all as specified and as directed.

Supply only in replacement side panel of desert cooler of 20" sweep, made out of 20 SWG, GI sheet, duly painted with 2 coats of synthetic enamelled paint over and including a coat of red oxide primer complete all as specified and as directed.

S&F in Repair Industrial fan motor suitable for 24 sweep fan, single phase, 50 Hz, 230V, AC, of approved make (as per sample) complete all as specified and as directed.

S&F in Repair Electronic water level indicator (LED type showing three level) complete all as specified and as directed.

M&L preparation of old painted surface of desert cooler of approximate size 28 inch x 28 inch x 32 inch, inner surface and outer surface complete, by knotting and stopping and repainting the complete desert coolers i.e. side panel, bracket, body and desert cooler stand with two coat of black water proof, synthetic enamel paint on reserve water tank and marking "GE E/M BHDC (MES)" letter of 50mm height with proportionate with desert cooler (Minimum surface area of desert Cooler for painting including stand - 09 Sqm) including servicing and greasing and replacement of PVC pipe, worn out nut, bolts and washers, PVC elbow all as per site requirement and writing the machine No including dismantling of all components from GI body evaporative cooler (desert cooler) and reassembling the same complete all as specified and as directed. Note:- If any worn out items noticed during reassembling, the same shall be measured and paid separately .

S&F in repair Air cooler swing motor AC, 220-240 V, 3 RPM, 4watt, 50 Hz, Torque 4Kgf.Cm , Shaft Rotation complete all as specified and as directed. Make:- BAJAJ/Symphony/Usha/Ken Star

S&F in repair Air cooler Dura Pump Ac 220-240 V, 14 watt, 50 Hz complete all as specified and as directed. Make:- BAJAJ/ Symphony/ Usha /Ken Star

S&F in repair Air cooler PCB AC, 220-240 V complete all as specified and as directed. Make:- BAJAJ/Symphony/Usha/ Ken Star

S&F in repair Air cooler 6 Blade AC 220-240 V complete all as specified and as directed. Make:- BAJAJ/Symphony/Usha/ Ken Star

Supply, installation, testing & Commissioning Box type LED sign board of minimum size 12 Feet (Length) X 4 Feet (Height), made out of 3mm thick hi grade exterior ACP sheet (2 Inch depth) with welded mild steel frame with following specifications, as per drawing approved by Engr-in-Charge including taking down old sign board complete all as specified and as directed:- (a) Box Type Sign board (2 inch Thickness) shall be made out of 3mm thick hi grade exterior ACP sheet on 50mm X 25mm mild steel Angle Iron Frame around. (b) LED Alphabets (7 Nos) of English language shall be made out of 18 SWG 304 Grade gloss 0.8 mm thick Hi grade Stainless Steel Profile polished Bending/ Cutting by CNC Fully Automatic machine. (c) 3mm thick cast Hi grade Acrylic Sheet shall be used on the front of Letters (Lit – Part) by professionally pasted in an Stainless Steel Profile of 2.5 Inch raised to be used for the Base which shall be sealed with Silicon colour as per letter pattern. (d) All letters shall be Dust proof, Water proof, Weather proof. (e) LED’s lights shall be installed on (ACP) Frame mounted with Stainless steel Frame along with 2” band. Input Voltage : 12V DC having operating temperature range of ‐10 degree C to 60 degree C. LPM technology for enhance LED life span of more than 50,000 hours and power consumption of not more than 0.5 watts per module. DC Power : 4W‐7W per feet Lumens O/P: 30Lm/Module CT: 6500K. Make ‐ Korean Samsung/ Taiwan RISHANG.

(f) Power Supply Shall be of International Standards IP 67 rated. Make –HILIGHT / Omron. (g) Supply wires shall be specifically designed for power 1.5 mm copper conductor. Outdoor grade, sunlight resistant wires with operating temperatures up to 105 degree in and including suitable size flexible PVC pipe. The work shall be done as per drawing approved by Engineer‐In‐Charge. (h) All Mild steel Frame shall be painted with two coats of Synthetic Enamel paint over & including one coat of red oxide/ Zink Chromate primer. (j) Necessary Scaffolding shall be provided by Contractor. All accessories, scaffolding, electric connections, sundries items and testing of LED Board shall be arranged by the contractor without any extra cost to Department.

All as per item No 46.00 here in before but minimum Size of LED Board 31 Feet (Length) X 6 Feet (Height) with LED Alphabets (60 Nos) of bilingual language (Hindi & English) complete all as specified and as directed.

SANJEEV ENTERPRISES

Saini Enterprises

R R Associates

J.P. Enterprises

Vishal Traders

M/S GEETANJALI ENTERPRISES

R K Enterprises

SHRI NIRMALA TOOLS