ADDN ALTN AND SPECIAL REPAIRS TO BLDG NO P25 39 40 61 MARRIED ACCOMODATION TYPE V QTRS AT DFRL MYSORE

Amount

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc, complete all as specified.

M&L rendering 15mm thick on brick work in cement mortar 1:6 and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15mm thick on brick work in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified

M&L complete removal of existing treatment for preparation of old surfaces of plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified and as directed

M&L applying two coats of dry distemper white or tinted on newly plastered wall surfaces including preparation and clearcolle of surfaces to distempering, complete all as specified.

M&L complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted including clearcolle on surfaces for preparatory to distempering, complete all as specified.

M&L complete removal of existing treatment applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preparation of surfaces, complete all as specified.

M&L applying two coats of exterior emulsion paint over a coat of primer on wall surfaces including preparation of surfaces complete all as specified and as directed (Make/Brand Name : Asian Paints/Apex ultima).

Demolition of cement concrete (un reinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and as directed

M&L 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed

M&L for providing and laying cement concrete 1:7:12, type F-2 (using 40 mm graded stone aggregate) as in filling under floor for sunken floor complete all as specified and as directed

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in flooring, 40mm thick complete all as specified and as directed

M&L granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement (1:2) using marble dist with admixture of pigment to match with shade of granite 20 mm thick including moulding of edges complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified.

M&L glazed ceremic tiles in vertical surfaces 350x250x7 mm/450x350x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specfied and directed.

M &L non skid ceramic colour tiles 7mm thick area of each tile exc 0.06 sqm but hieght exc 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 20mm screed bed in cement mortar 1:6 complete all as specified and as directed

M&L Vitrified ceramic tiles of size 10 mm thick dark shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Taking down chowkats or frame with shutters from the frame exc. 1.50 Sqm and n exc. 4 Sqm each and removing from site.

Taking down chowkhats or frame n.exceeding 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

M&L 2nd class hard wood in scantling, clean sawn, timber fixed complete all as specified

S&F 35 mm thick panelled shutter factory made plain framed (any number of panel ) with panels of timber flat on both sides ( on both sides ( feather edged ) or of veneered particles board medium density wood particle board with commercial face veneers & removing from site complete all as specified and as directed

S&F factory made 35 mm thick glazed and skelton shutters made of second class hard wood ((Bonsum/Hollock) open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with chowkats complete all as specified and as directed

S&F solid PVC door frame size 50mm X 47mm thick, made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply and fixing in opening as per specification and drawing including PCC (1:3:6) for hold fast etc all as specified.

S&F factory made solid PVC door shutter 30m thick (style) consisting of frame made out MS tube for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strips of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for top rail , lock rail and bottom rail on either side and as gape insert for top rail and bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded , seald to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side as per specification complete all as specified and as directed

M&L galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

M&L cutting holes in brick wall exc half brick but not exc one brick in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 all as specified and directed.

M&L cutting holes in brick wall n. exc half brick in bricks wall butt in cement mortar or cement lime mortar & stone wall built in cement mortar for inerting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 all as specified and directed.

S&F mild steel butt hinge 100mm long, medium weight cold rolled.

S&F mild steel butt hinge 50mm long, medium weight cold rolled.

M&L Mild steel barrel tower bolts 200mm long stove enameled black with bright bolt and fixed.

M&L Mild steel pressed handle, oval type stove enameled black 150mm long and fixed.

M&L mild steel sliding door bolts 300mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and as directed

M&L preparing surface of wood and wood based material steel and iron work, new or old, of any description and girth treating end of posts, back of chowkats etc are tarred exc 0.1 sqm but not exc 0.5 sqm each complete all as specified and as directed

All as per item No 34 above but treating small article such as stop, covers, gully grating, hold fast, end of pots, back of chowkats etc area not exc 0.1sqm each complete all as specified and as directed

Supply and fixing brass chromium plated tubular towel rail 60cm long, 20mm dia 'D' type between flanges complete all as specified.

Supply and fixing door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring over all length of cover plate 140mm complete all as specified and as directed.

Dismantling and refixing polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I complete all as specified and as directed

M&L 20mm bore ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed

S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed complete all as specified and as directed

Taking up or down steel tubing and connection including removal to store of 15mm bore.

Taking up or down steel tubing and connection including removal to store of 20mm bore.

M&L 20mm bore tube medium grade galvanized with all fitting and fix complete all as specified and as directed

M&L 15mm bore tube medium grade galvanized with all fitting and fix complete complete all as specified and as directed

Fixing only in repairs vitreous china water closet Padestal pattern( white ) and trap, including connection to drain pipes and flushing pipes, antisyphonage pipe,etc complete all as directed.

S&F Vitreous china wash basin white flat back size 550 x 400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete fixed in repair complete all as specified and as directed

S&F PVC valveless, symphonic action type, flushing cistern low level white with inlet ball valve flot and handle including brackets 10 ltrs capacity fixed in repair complete all as specified and as directed

S&F PVC connections 15mm size with PTMT nut of length 450mm fixed in repair complete

S&F in repairs 15mm chromium plated cast copper alloy bib taps complete all as specified and as directed

S&F 15mm pillar tap cast copper alloy with capstan head chromium plated fixed complete all as specified and as directed

S&F 15mm stop cock fancy type chromium plated fixed in repair complete all as specified and as directed

S&F in repairs 75mm size brass chromium plated shower rose with swivel joints and swivel arms including fixing to steel pipes or unions complete all as specified and as directed

S&F soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed.

Supply & fixing in repair 32mm dia PVC waste pipe 60cm long with unions for WHB complete all as specified.

M & L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth applying two coats of synthetic enameled paint over one coat of pink primer complete all as specified and as directed

S&F in repairs 20 mm dia decorative curtain rods of MS conduit with polymer linning etc. with decorative side dome and brackets complete all as directed by Engineer In Charge.

S&F in repairs decorative curtain rod brackets for hanging/ fixing drapery curtain rods as directed .

M&L 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of path as complete all as specified and as directed

M&L chequred cement concrete tiles 20cm X 20cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified & directed.

S&F 110mm PVC(SWR) bends any radius, with oval access door, complete all as specified and directed.

S&F 110mm PVC(SWR) branch piece, single (single Y) equal or unequal fixed with solvent cement complete all as specified and directed.

S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F anodised aluminum door shutters, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

M&L sheet glass, frosted on one side, ordinary quality and glazing with glazing clips/oil putty in square n.exc 0.5 sqm in each pane 4.8 mm thickness complete all as specified and as directed

M&L sheet glass, ordinary quality and glazing with glazing clip/oil putty in square but exc 0.5 sqm in each pane, 4.8 mm thickness complete all as specified and as directed

Taking down carefully existing copper / aluminium point wiring (Concealed / surface) light/fan, socket or power complete including fittings and fixtures such as switches sockets ceiling roses pendants regulators light fittings etc removing to store for safe custody or for taking credit and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volt FR grade ISI marked with multistranded copper conductor drawn through new concealed conduit in wall / ceiling with and including provision of MS box of suitable size with 3 mm thick laminated hylam sheet cover for housing switch, socket, etc including provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following all as specified and as directed.

(a) One light point controlled by one 05 Amps switch.

(b)One fan / exhaust fan point controlled by one switch.

(c)one ligth point controlled by Two Nos of 2 way switch 6 amps

(d) One socket out multi pin 5 Amps controlled by one switch on independent board.

(e) One calling bell point controlled by one bell push

All as per item No 69 above but point wiring with 2.5 sqmm cable for 15 amps socket outlet.

Supply and fix modular switch 1 way 6A 1 module one way complete all as specified and as directed.

Supply and fix switch piano 5 Amps two way complete all as specified and as directed.

Supply and fix Modular bell push flush type 6A

Supply and fix modular switch socket outlet 5 Amps multi purpose fluse type complete all as specified and as directed.

Supply and fix modular switch socket outlet multipurpose 3 pin,15 amps one pin ,5 amps controlled by one switch complete all as specified and as directed.

Supply and fix modular fan regulator electronic step type humming free,120 W -2 module watts complete all as specified and as directed.

Supply and fix modular white cover with frame of following module :-

(a) White cover plate with frame, 4 module

(b) White cover plate with frame, 8 module

(c) White cover plate with frame, 12 module

Taking down old unserviceable aluminium sub main wiring of any description and any size.

Submain wiring complete with 2 runs of 6 sqmm PVC insulated and unsheathed cable with multi stranded copper conductor, including 1 run of 4 sqmm PVC insulated un-sheathed copper conductor cable green colour as continuous earth continuity conductor.

Submain wiring complete with 4 runs of 6 sqmm PVC insulated and unsheathed cable with multi stranded copper conductor, including 2 run of 4 sqmm PVC insulated un-sheathed copper conductor cable green colour as continuous earth continuity conductor.

Taking down / removing of unsericeable main switches /MCB DB / MCB's and supply and fixing of following including making good the disturbed surface to match the existing wall and making necessary connection with suitable size copper wire complete all as specified and as directed.

(a) MCB DB double door type TPN 04 way with 200 amps rated bus bar

(b) MCB DB double door type single phase with common earth and neutral bus and 200 amps copper bus bars complete, 240 volts, 08 way

Supply and fix in replacement MCB TP 10 KA 415V, 'C' series of capacity 32 amps

Supply and fix in replacement MCB SPN 10 KA 415V, 'C' series of capacity 20 amps MAKE INDOASIAN/HAVELLS / L&T

Supply and fix MCB SP 20 Amps

Supply and fix MCB SP 10 Amps

Supply and fix LED Fitting 10 Watts with polycarbonate housing and integrated electrical device

Supply and fix LED Fitting 20 Watts with polycarbonate housing and integrated electrical device

Earthing complete with GI earth plate electrode 60cm x 60cm x 6mm size buried directly in ground with bottom edge of the plate not less than 2.25 meters below normal ground level and connected to GI earth lead of size 4mm dia as earth lead by means of nuts bolts etc with and including earth lead upto 7.5RM including necessary excavation, earth chamber with plain cement concrete 1:3:6 type C-1, necessary reinforced cement concrete chamber cover in cement concrete 1:2:4 with nominal reinforcement, funnel etc., all as shown in electrical plate No.3 of SSR Part I, including excavation in any type of strata and connected to earthing test point including testing on completion all as specified and as directed.

SAPTHAGIRI CONSTRUCTIONS

S CHANDRASHEKAR (SREE BUILDERS)

ANAND REFRIGERATION

Moulya Builders

eurekaenterprises

Kaveri Enterprise

JM Engineering

ARATHEERTHA CONCEPTS