Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.3 LAccepted-AOC 107 1A TOLLYGAUNG ROAD KOLKATA 700026 WB | KOLKATA | WEST BENGAL | 700026 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹45.6 L+₹2.1 L (4.90%)Rejected-Finance 63 47 49 1ST FLOOR BAKRAHAT ROAD THAKURPUKUR KOLKATA 700063 | KOLKATA | WEST BENGAL | 700063 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹46.8 L+₹3.4 L (7.73%)Rejected-Finance 35 PATHAK PARA ROAD FLAT NO 32C 3RD FLOOR SHANTINEER APARTMENT BEHALA KOLKATA 700060 | KOLKATA | KOLKATA | WEST BENGAL | 700060 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹47.1 L+₹3.7 L (8.41%)Rejected-Finance VILL PUILLYA PO UNSANI DISTT HOWRAH PIN 711302 | HOWRAH | WEST BENGAL | 711302 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹47.9 L+₹4.4 L (10.2%)Rejected-Finance 107 1F TOLLYGUNGE ROAD KOLKATA 700026 WB | KOLKATA | WEST BENGAL | 700026 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIRS/ MAINT AND IMPROVEMENT TO SURFACE FINISHES OF WALL IN KITCHNER HOUSE, CHOWRANGEE HOUSE AND WATER GATE HOUSE INSIDE FORT WILLIAM UNDE GE (FW) KOLKATA
2023_MES_607134_1
8150/E8
Open Tender
Civil Works
Item Rate
180 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹80,000
13 Sept 2023
30 Jun 2023
22 Jul 2023
30 Jun 2023
21 Jul 2023
14 Jul 2023
Amount
Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. incl necessary formwork complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting of any gauge, thickness, including roof coverings, including stacking serviceable materials of re-use, complete all as directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured Galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile Galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile Galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
M&L for pre-painted, Galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for 0.56mm thick plain aluminium sheeting alloy 31000 H4 as in ridges, hips, valley gutters, drip and straight flashing etc., complete all as specified and directed.
M&L Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165 complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in alternate bays, finished even and smooth without using extra cement as directed by the Engr-in-Charge.
M&L for brick work using old size fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 complete all as specified and directed.
M&L for rendering 15 mm thick built in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and mixed with water proofing smart care damp block compound 2K of Make: Asian paint as per manufacturer's instructions including necessary scaffolding in any position, complete all as specified and directed.
M & L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with water proofing compound (@ 200 ml per bag of cement or as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separately as "Supply only".
Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.
M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L 10 mm thick rendering on ceiling surfaces in cement mortar 1:3, finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and as directed
M&L for preparation of new plastered surfaces of walls by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc., including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 1.5 mm thick wall putty for smooth finish and finishing with two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer and necessary scaffolding for any building height complete all as specified and directed.
All as per item No.18 above but on ceilings.
M&L for applying one coat of acrylic distemper, finished with rollers to old decorated surfaces of walls including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for applying one coats of acrylic distemper, finished with rollers to old decorated surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls of any description over 10 cm width or girth and applying two coats of acrylic emulsion/plastic emulsion paint, finished with rollers over a coat of primer, complete all as specified and directed by Engineer-in-Charge.
M&L for applying one coat of cement base paint using brush to old decorated surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete as specified and directed.
M&L for cleanign new plastered surfaces of walls, soffits of chajja, roof slab etc, using emery paper, putty blade/scraper as applicable for removing corrosion, algae formation etc complete with one coat fo putty ghola and applying two coats of weather proof exterior emulsion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over one coat of exterior based primer with brush finished over 1mm thick exterior wall care putty including necessary scaffolding, safety and protective measures for upto 4 storey building height complete all as specified and directed.
M&L for complete removal and cleaning old treated surfaces of walls, soffits of chajja, roof slab et, using high pressure jet washer including cleaning the surface by scraping as required using emery paper, putty blade / scraper as applicable for removing loose paint, corrosion, algae formation etc complete with one coat of putty ghola and applying two coats of weather proof exterior emulsion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over two coat of damp proof primer with brush finished over 1mm thick exterior wall care putty including necessary scaffolding, safety and protective measures for upto 4 storey building height complete all as specified and directed.
M&L for cleaning new plastered surfaces of walls, soffits of chajja, roof slab etc, using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc complete with one coat of putty ghola and applying two coats of weather proof exterior emulsion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over two coats of suitable exterior damp proof primer with brush finished with gargo machine over 1mm thick exterior wall care putty, including necessary scaffolding, safety and protective measures for upto 4 storey building height complete all as specified and directed.
M&L for complete removal and cleaning old treated surfaces of walls, soffits of chajja, roof slab etc, using high pressure jet washer including cleaning the surface by scraping as required using emery paper, putty blade/ scraper as applicable for removing loose paint, corrosion, algae formation etc complete with one coat of putty ghola and applying two coats fo weather proof exterior emulsion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over one coat of suitable exterior weather proof primer with brush finished over 1mm thick exterior wall care putty including necessary scaffolding, safety and protective measures for upto 4 storey building height complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
Note for item No. 25 & 29. The all process of painting will be carried out of Manufacturer authorised representative only, Jet Water machine and Graco Spry painting Machine shall be borne by the contractor and also the contractor should provide adequate jet and Spray machines as per site requirement as directed by Eng-in-Charge.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for complete removal of existing finish of old treated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L preparing old surfaces of brick, stone, concrete, asbestos cement surfaces or plastered surfaces of any description and applying one coat of synthetic enamel paint over complete all as directed.
M&L for preparation of old cracks on the wall surfaces by raking out joints, hacking for key and 'V' groove cutting with a grinder or hammer & chisel, upto 5 mm thick, properly cleaning and filling with crack filler, as per manufacturer's specifications, finsihed smooth and even with exterior wall putty complete all as specified and directed. (Make: Dr Fixit, Crack - X Paste / Asian Paints, Smart Care Crack Seal / Berger Home Shield, Crack Fill Paste or equivalent product in other paint/building chemical mentioned in tender)
All as per item No.36 above, but for cracks upto 5 - 10 mm thick. (Make: Dr Fixit, Crack - X Shrinkfree / Asian Paints, Smart care Textured Crack Filler or equivalent product in other paint/building chemical mentioned in tender)
M&L for cleaning of roofs by getting out growing vegetations / grass & brooming down with removing it out of MD land premises of including repairing to damaged surface of roof by applying two coats of tartaric acid over two coats of CM (1:3) with mixed with 3% WPC & sealed with 85/25 hot blown grade bitumen complete in patch not exceeding 2.0 Sqm each including necessary scaffolding, complete all as directed by Engineer in Charge.
M&L for repairing of damaged portion of mouth at terrace / roof surface of rain water pipe by cleaning and repairing to mouth of rain water pipe (RWP) by using CM (1:3) with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof, complete all as directed by Engineer in Charge.
M& L for repairs to chajja area exc 1 Sqm and n exc 2 Sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM (1:3) or PCC (1:2:4) type B-0 (using 12.5 mm stone aggregate) on top with WPC, benching / haunching, repair to broken plaster with dubbing coat including necessary scaffolding complete all as directed.
M& L for repairs to chajja area exc 2 Sqm and n exc 4 Sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM (1:3) / PCC (1:2:4) type B-0 on top with WPC, benching / haunching, repair to broken plaster with dubbing coat, including necessary scaffolding complete all as specified and directed.
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed. Note: Dismantling and refixing of the lightening strip, if any. shall be deemed to be included in the rate quoted.
M&L for brushing neat cement slurry with 2.75 Kg of cement per Sqm on roof complete all as specified and directed.
M&L for Providing Cement Concrete, Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid separately)
M & L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.
M&L bituminous gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces, all as specified and directed.
M&L 15 mm thick screed bed or bedding layer in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately )
M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane. (v) Sealing of all angles & abutments upstands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.
Taking up or down GI Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
25mm bore outer dia
Relaying/Re-fixing Galvanised Steel Tubing and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush, fixed to walls and ceilings or laid in floors complete all as specified and as directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
25mm bore outer dia
Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
25mm bore outer dia
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed.
S&F in repair PTMT Ball Valve 20mm dia, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed. (MAKE : PRAYAG, Cat No. 152 or equivalent model in JEXON / POLYTUF / SHAKTI)
Disconnecting exiting water storage Tank of capacity exceeding 250 litres but not exceeding 500 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.
S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : PRAYAG, Cat No: 6718 / Essco, Cat No: SQT-514EKN or Equivalent approved makes specified in the tender )
All as per item No.55 above , but 25mm bore Stop valve. (MAKE : PRAYAG, Cat No: 6798 / Essco, Cat No: SPL-553 or Equivalent approved makes specified in the tender)
Dismantling of cast iron or reinforced concrete drain pipes, 150/100 mm bore, jointed in cement mortar and taking out of trenches/walls, complete all as specified and directed.
S&F 150mm Cast iron rainwater socketed pipes with ears, joint with cement mortar(1:1) fixed to wall complete all specified and directed.
S&F 100mm Cast iron rainwater socketed pipes with ears, joint with cement mortar(1:1) fixed to wall complete all specified and directed.
S&F 150mm Cast iron Bends or elbows, square, or obtuse complete all specified and directed.
S&F 150mm cast iron Branch, double branch pipe (Tee Section), complete all specified and directed.
S&F 100mm Cast iron Bends or elbows, square, or obtuse complete all specified and directed.
S&F 100mm cast iron Branch, double branch pipe (Tee Section), complete all specified and directed.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
M/S SHRI P K ACHARJEE
MUKHERJEE ENTERPRISE
PRABIR TRADERS
DEEPAK KHATTAR
UNIVERSAL TRADING CENTRE
SANTOSH INTERNATIONAL
UNITED ENGINEERS
dutta and dutta
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .