Providing new WPC doors for toilets, EWC, internal Painting and other works in G - 4 Staff Quarter in KS LANE Compound, Hyderabad

Amount

1) Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm.

2) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

3) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

4) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

5) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

6) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

7) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

8) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

9) Finishing walls with Acrylic Smooth exterior paint of required shade : Old work ( Two or more Coat applied @1.67 ltr/ 10 sqm) on existing cement paint surface

10) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand).

11) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

12) Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm.

13) Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30 cm length.

14) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm.

15) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

16) Dismantling of existing Indian WC pan along with trap from its position including lime concrete and top flooring to required size and depth to fix new Indian WC pan including jointing with new exisitng waste pipes and refilling the surroundings with cement concrete of grade 1:5:10 (1 Cement : 5 Coarse sand : 10 graded brick aggregate 40 mm nominal size) and finishing the floor with cement concrete flooring using required quantity of FOSROC or approved equavalent water proofing liquid as per manufacturers specifications. All complete including disposal of all malba to approved location within the compound. All complete and as per the directions of the Engineer - in - charge.

17) Providing & fixing fly proof stainless steel wire gauze to windows, clerestory windows & doors with T.W. beading 15x1mm and nails & screws complete. Stainless steel (grade 304) wire gauze of 0.3 mm dia wire and 1.8mm aperture on both sides.

18) Providing and fixing PTMT health faucet of approved brand and manufacture with PVC pipe including holder complete etc., as directed by the Engineer-in-charge.

19) Providing and fixing C.P. brass two in one bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. :

20) Providing and fixing PTMT grating 100 mm nominal dia. Circular type. of approved quality and colour.

21) Providing and fixing PTMT stop cock of approved brand and manufacture. 15 mm nominal bore.