SPECIAL REPAIR TO BLDG NO. P-36 SMC AT SION AIRFORCE STATION MUMBAI UNDER GE AF THANE

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as spd and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc completed all as specified.

S&F for plates (plain) channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A, flat iron, etc. all as specified and directed.

Dismantling wrought iron or mild steel work of any description etc complete all as spd and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st.-240 all as specified and directed by engr-in-charge etc. completed

M&L for preparation of new steel surfaces not otherwise described and applying two coats of aluminium paint over a coat aluminium red oxide primer complete all as specified and directed by engr-in-charge etc. completed

M&L for preparation of old steel surfaces not otherwise described and applying two coats of aluminium paint over a coat aluminium red oxide primer complete all as specified and directed by engr-in-charge etc. completed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L 25 mm thick plain cement concrete 1:2:4, type B 0, using 12.50mm graded stone aggregate in leveling cousre etc. as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:6 ,etc completed all as specified.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) dark shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles etc completed all as specified.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and removing the debris outside MOD Land. Note:-Removing of electric switches and sockets boards carefully and refixing in without damage to the same position, no extra cost will be paid on this account.

M&L for rendering 10mm thck in CM 1:4 as backing coat to receive dado finish.

S & F of Glazed ceramic Coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match to tiles complete all as specified and directed by Engr-in-charge,

M & L for 20mm thick Granite (of any type) work (table rubbed andpolished) for wall lining (veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Taking down chowkats or frames with shutters (without taking off shutters from frame) n. exc 1.5 sqm each

Taking down chowkats or frames with shutters (without taking off shutters from frame) . exc 1.5 sqm & n.exc 4 sqm each

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube & edges will be painted to match with prelam sheet suppling & fixing in opening as per specification and drawing etc. complete all as specified

S & F of Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design With Particle Board Core with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-charge.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S & F of Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron), door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L for 5.5 mm thick frosted sheet glass fixing with aluminum frame with necessary screw/bolt complete

S & F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L 9mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated.

S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc complete all as spcd.

M&L for preparation of old wood surfaces of any description over 10cm width of girth applying one coats of synthetic enamel paint etc complete all as spcd.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed complete.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 100 mm long.

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long

S&F aluminium anodised door sliding bolt aldrop 300 mm long Make-classic/Shalimar etc equivalent ISI Marked.

S & F for Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm,etc complete all as spd and directed.

Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surface fair and even.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall, rendering is to be finished even and smooth (without using extra lime or cement) with liquid WPC complete all as specified. (Note:- WPC shall be measured and paid separately)

Supply only Liquid water proofing compound as specified and directed .

M&L Priming surfaces and applying normal treatment (for moderate conditions)using glass fibre base bitumen felt, grade 2 complete all as specified

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surfaceby forced application complete all as specified

M&L for preparing newly plastered surfaces andProviding and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of OBD over a coat of primer on walls all as specified

M & L for preparation of old plastered surfaces and applying applying two coats of OBD over a coat of chalk whiting on celing complete.

M&L for preparing new plaster surfaces of walls applying two coats of weather proof acrylic emultion paint over a coat of weather coat primer all as per manufacturers instructions and directed including 10m height steel scaffolding complete all as specified by GE/Engineer-in-Charge

Dismantling water tanks and removing to store complete all as specified and directed by Engr-in-charge.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000ltr capecity hoisted and fixed in position all as specified including dismantling old tank

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), Bore dia of pipe in 20 mm, etc complete all as specifed and directed.

Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including cover fillets complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work of size 605mmx605mm for false ceiling and hangers 6 mm dia. G.I. suspender (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long complete all as specified

S&F PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and directed by Engr-in-Charge.

Framed work such as grills,gratings, etc.. With ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified

S&F Vitreous China wash down water closet pan(padstal pattern) white (squatting pan & trap including 'P' or 'S' trap connection to drain (or out going pipe and to flushing pipe anti shyfonic pipe etc completely fixed in repairs.

S&F in repair wash basins, vitreous china (flat back or angle type) any size incl cutting for and pinning in ends of brackets or recting stand including brackets and waste pipe etc.

S&F in repair CP Towel rail 20 mm dia, D type 60 cm long complete.

S&F in repairs Soap dish, vitreous China white, approximate size 160x160x90mm embedded in the wall

S&F in repair half turn bib tap 15mm bore chroumium plated cast copper alloy crutch or butter fly handle screwed down screwed for iron pipe fixed.

S&F in repair half turn CP Pillar taps of 15 mm bore with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shan ks and fly nuts screwed for iron pipe and fixed all as spd

M & L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement

S&F 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed.

S&F PVC connections for 15mm size with PTMT nuts of length 600mm

S&F PVC connections for 15mm size with PTMT nuts of length 900mm

S&F 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting including taking down old cistern all as specified and as directed.

S&F Toilet paper holder of vitreous china, box type in white colour fixed to walls with chromium plated (CP) brass screws

M&L for repairs to sunken floor slab with the following specifications:-(a) Demolition of the surfaces of old concrete floor of any type and description, demolition of the brick bat coba completetly , picking, sweeping cleaning and washing down with water to remove dust etc. (b) M& L PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor, with proper slope towards GI spout. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth without using extra cement. (d) M/L damp proof course on horizontal surfaces with scrapping and properly cleaning the surface to remove loose particles & applying one coat of self priming (33% dilution) and two coats of undiluted material with @ 10.67 its per 10 sqm smart care Damp proof of asian paint/dr fixit (pidilite) for water proofing, along with Damp proof course on vertical surfaces up to floor level by properly cleaning the surface to remove loose particles and applying one coat of self priming (33% dilution) and one coats of undiluted material with @ 4.85 lts per 10 sqmts, smart care Damp proof or dr fixit for water proofing (e) M/L Brick bats filling under sunken floor and PCC 1:3:6, type C-2, using 20mm graded stone aggreagte 75mm thick, over brick bats coba filling as in subbase to receive tiles. etc completed and as directed by Engr in charge . Note:-(i) Rate shall be inclusive of all items mentioned above, nothing shall be paid extra on this account and contractor shall submit gurantee of minimum 7 years (ii) For payment purpose only floor area shall be measured.(iii) GI spout of 50mm dia projected 300mm from external wall shall be included in above item

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:6 all as specified and directed by engr-in-charge etc. completed.

M&L for 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed by engr-in-charge etc. completed.

Taking down 15mm bore steel tubing & connection including cleaning for re-fixing or removal to store.

Taking down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store.

M&L for 20mm outer dia, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings stability for hot & cold water supply including fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

M&L for 25mm outer dia, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings stability for hot & cold water supply including fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

M&L for 32mm outer dia, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings stability for hot & cold water supply including fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

Extra over item of 20 mm CPVC pipes above for Female Brass Threaded Adaptor (FTA/ FBTA) complete.

Extra over item of 32mm CPVC pipe above for BALL VALVE complete.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches / floors or fixed to walls .

Ditto as Item No 75.00 above but 75 mm bore in repair.

S&F in repair 110 mm bore PVC (SWR) bends .

S&F in repair 75 mm bore PVC (SWR) bends .

S&F in repair of SS 25 mm dia Drapery curtain rods as specified and directed

S&F in repair SS fancy type decorative for 25 mm dia curtain rod brackets etc. complete.

S&F in repair Aluminium Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete.

M&L for Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron etc. complete all as specified and directed.

demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) as directed and specified

M & L 75 mm thick for cement concrete type C2 , 1:3:6 of 40 mm graded stone aggregate as in plinth protection etc complete all as directed and specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

Taking down ceiling fan /EXHAUST FAN of any size or make and refixing the same all as specified and directed by Engr -in-Charge.

M&L Point wiring with PVC insulated sheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated sheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade Conduit not less then 20 mm width with modular metal sunken switch with face plate for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Note : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling

One light point controlled by one, one way switch

One light point controlled by two 2-way switches, cable 1.5 sq.mm size

One ceiling /exhaust fan point controlled by one switch and regulator

One 3 pin 5 amp socket out point on the same board with other switches.

One3 pin 5 amps socket out let point on independent board

Ditto all as per Ser item No. 89.00 above but for one socket outlet 15 Amp on independent board with 4 Sq mm cable and 2.5 Sq mm earth wire.

Ditto all as per Ser item No. 89.00 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

Supply and Fix ,Ceiling rose surface bakelite two to three terminal complete all as specified and directed.

Material and labour Modular white cover plate with frame of following types complete all as specified and directed

White cover plate with frame, 2 module

White cover plate with frame, 3 module

White cover plate with frame, 4 module

White cover plate with frame, 6 module

White cover plate with frame, 8 module

Material and labour Modular Metal flush box of following types complete all as specified and directed

Metal flush box,1/2 module

Metal flush box, 3 module

Metal flush box, 4 module

Metal flush box, 6 module

Metal flush box, 8 module

Material and labour Modular switch 1 way 10A, 1 module complete all as specified and directed

Material and labour Modular Socket 6A -2/3 pin combined 2 module complete all as specified and directed

Material and labour Modular Socket 6A/16A -2/3 pin combined 2 module complete all as specified and directed

Material and labour Modular switch 1 way 16A, 1 module complete all as specified and directed

Material and labour Modular Fan Step regulator, 120W-2 module complete all as specified and directed

Supply and Fix of Ceiling rose surface bakelite two to three terminal complete all as specified and directed

Supply and Fix of Lamp holder,insulated body with back plate and LED lamp complete all as specified and directed

Supply and Fix of MCB DB SPN 8 Way double door type 415 V with bus bar complete all as specified and directed

M&L MCCB DB verticle type made of sheet steel , powder painted with neutral bus bar 200 A, neutral link, IP-30-IK08 protection grade , 415Volts TPN with 4 way Double door complete all as specified and directed,

M&L MCCB TPN 100 Amps , 415Volts, 25KA ,3 Polecomplete all as specified and directed,

Supply and Fix of MCB SP 06 to 32 Amps 240 Volts complete all as specified and directed.

Supply and Fix of SPN 6- 40 Amps 240 Volts complete all as specified and directed.

Supply and Fix single pole and neutral enclouser with a two pin and earth and metal clad plug socket complete with one single pole MCB 25 Amp 240 Volts complete all as specified and directed. NOTE for Ser Item No. 102.00, 103.00 and 107.00 - (1).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB tobe fixed on wall including frame made out of MS flat 40x5mm(2).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat srink envioromentel friendly Energy efficient ready to use pack , 20 Watt , 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos etc. with 100lum/watt, CRI> 70, Surge protection 4 KVA

Supply and fixing LED Light fitting Mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete with 100lum/watt, CRI> 70, Surge protection 4 KVA.

S&F LED Light luminaries Square type 36W suitable suitable for Modular/pop/Gypsum ceiling with starter, connector block, etc,complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible conductor of copper with PVC square blocks of size 600mmX600mm for fixing the fittingcomplete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, fixed on suitable size GI pipe with GI Pipe, bracket and anchor fastner for mounting

M&L for sub main wiring with two single core 10 Sqmm FR PVC insulated with one run of Nutral Black Colour and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 6.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed. Note :-Five single core cables along with earth wire and Nutral and Casing -N-Caping shall be measured as one unit length

M&L for sub main wiring with two single core 6 Sqmm FR PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 4.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed. Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length

M & L for Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of cable and getting out in Soft / loose soil complete all as specified and directed

M & L for Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

M & L for Removing excavated material n. exc. 50 M away, depositing as directed at level n. exc. 1.5 M above starting point complete all as specified and directed .

M&L for providing crushed stone sand cushioning to UG cable including punning down of sand in layers complete all as specified and directed. Note: Punned thickness only shall be measured.

Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches complete all as specified and directed

Taking down GI pipe laying in trenches for UG cable protection of any sizes pipe complete all as specified and as diercted.

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 50 mm with and including all fittings and accessories for cable protection complete all as specified and directed

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 80 mm with and including all fittings and accessories for cable protection complete all as specified and directed

Taking down any sizes of of LT UG cable XLPE with aluminum conductor multistranded , PVC insulated and PVC sheeted heavy duty 1100 Volts grade under ground cable complete all as specified and as directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 50 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 70 sq mm 3.5 Core complete all as specified and directed.

Supply and fix Electric storage water heater (Geyser) 25 Ltrs capacity, 230 volts, single phase, 50 Hz, of rated power 2000 Watt, rated water pressure .8 Mpa incl all accessories including taking down unservviceable geyser from existing place & deposited into AGE E/M (AF) Mumbai store yard and making good for disturbed surfaces, including water connection arrangement with sutable Hot/Cool Pipe as per spicefied and directed.

Supply and fix gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of sizes 15 mm dia complete all as specified and as directed by Engineer - in-Charge:

Supplying & Laying, connecting and testing GI pipe 15 mm bore medium grade including necessary fittings in trenches complete all as specified and directed by Engineer-in-charge.

Supplying & Laying, connecting and testing GI pipe 25 mm bore medium grade including necessary fittings in trenches complete all as specified and directed by Engineer-in-charge.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule

Supply and fix exhaust fan 300 MM sweep, 230 volts, 50 hz, metallic grey colour with louvers complete all as specified and directed.

Supply and fix Ceiling fan 1400 MM sweep, 230 volts, 50 hz, 245CFM, white colour with complete all as specified and directed.

M&L for servicing and refixing of fan by opening of body, cleaning of slots, rewinding of fan by super enamelled copper insulated wire as per existing gauge, varnishing, heating, assembling, painting including scraping out of old paint filling of cavities with filler, preparation of body and clearing of dust etc. painting by spray with first quality paint, including overhauling of ceiling fan/ exhaust fan by sweep oiling, greasing including removing all dust and replacement of split pin and bolts, nuts and screws complete all as specified and directed

sapana enterprises (BID ID -3430720)

MUKESH CONSTRUCTION CO (BID ID -3431096)