Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC BAPPA CONSTRUCTION BINPUR JHARGRAM | BINPUR | JHARGRAM | WEST BENGAL | 721514 | L1 | Accepted-AOC AOC Issued | |
| 2 | L2₹29.7 L+₹1.1 L (3.99%)Rejected-Finance | L2 | Rejected-Finance That the BID is not L1 | |
| 3 | L3₹29.9 L+₹1.3 L (4.58%)Rejected-Finance 83 50 DUM DUM ROAD KOL 74 | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700074 | L3 | Rejected-Finance That the BID is L1 | |
| 4 | L4₹30.9 L+₹2.3 L (8.06%)Rejected-Finance 1260 GANGAPUR GROUND FLOOR MANDIRTALA DUTTAPUKUR NORTH 24 PARGANAS WEST BENGAL 743248 | 24 PARAGANAS NORTH | WEST BENGAL | 743248 | L4 | Rejected-Finance That the BID is not L1 | |
| 5 | L5₹31.3 L+₹2.7 L (9.62%)Rejected-Finance 448 MUZAFFAR AHMED STREET KOLKATA 700 016 | KOLKATA | KOLKATA | WEST BENGAL | 700016 | L5 | Rejected-Finance That the BID is not L1 |
Tender Value
₹35.7 L
EMD Value
₹71,374
Closing Date
25 Sept 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE KNHED PW Dte
THE EXECUTIVE ENGINEER, P.W.D /KOLKATA NORTH HEALTH ELECTRICAL DIVISION
SITC of Highmast and luminaries for compound illumination at Dr. B C Roy PGIPS, Phool Bagan Campus Beliaghata Campus.
2024_WBPWD_752513_1
WBPWD/EE/KNHED/e-NIQ-84/24-25
Open Tender
ELECTRICAL WORKS ORG
Item Rate
7 days
Kolkata
Please refer Tender documents.
5 documents required · 5 mandatory
₹71,374
15 Dec 2025
18 Sept 2024
27 Sept 2024
18 Sept 2024
25 Sept 2024
18 Sept 2024
Amount
Supply of 12.5 Mtr High Mast, 3,3 shaft thickness in two sections, Top A/F 150, Bottom A/F 360 , Base Plate 520 (O/D)x25 dimension as per manufacture design to suitable for wind speed 180 Km/hr. as per IS:875 with head frame, luminaries carriage suitable to install 6 no. 150-200W led flood light fixtureslightning finial along with the other accessories like double drum winch, 6mm diameter 2 Rope system SS wirerope, trailing cable 5cx2.5 sq mm , connector, integral power tool motor, manual handle, junction box A) Material grade of shaft shall be of S355JO/JRas per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 Galvanization as per BSEN ISO:1461.
Supply of 6 No.M24X 750 “I” foundation bolts as per EN8 Grade (Ts-600) manufactured from special steel along with nuts, washers, anchor plates and templates Make Bajaj/Valmont/Transrail/Utkarsh/CG
Supply of LED Single Dome Avaition Lamp Make-Bajaj/CG
Supply of outdoor stand mounted feeder pillar with 63A TPN MCB incomer, single 1 No 41500.00 dial time switch, 45A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and outgoing 16 & 2.5 sq. mm terminals.
Construction of suitable Shallow foundation for 12.5 Mtr. High Mast with sand and brick soling and M-25 grade RCC foundation for High mast considering soil bearing capacity (SBC) 10T/sq. mtr. at 2 mtr( w) x 2 mtr ( L) x 3 Mtr. depth(incl 150 mm above from GL leve) with all materials and labour and payment made as per PWD civil schedule & as per direction of EIC The Soil Test Report must be carried out by third party by the agency The Drawing & design must be vetted by the PWD Design Division.
Erection , Testing and commissioning of 12.5 Mtr. Mast and Feeder Pillar by using of lifting equipment like hydra etc. and fixing and wiring of Luminaires with 7c x 2.5 sq mm flexible cable , 32 Amps 4 Pole MCBc etc. with necessary arrangement with labour cost
Supply and fixing of 210-220V, 220-250W LED Flood Light with die cast iron body ,Lumen Efficacy ≥110 LPW, IP-66 [Make- Wipro/Philips/Lighting Technology) With Minimum warrenty of 2 Years [For High Masts]
Supply and Delivery of 1.1kV grade following XLPE Al Ar cable. (Make: Havells/ Polycab/ RR Kabel/ Gloster/ KEI) [NS] b) 4 Core 16 Sqmm
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core [4 Core 16 Sqmm] [PWD El Sch Page F-1 Item No- 3(a)]
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [ 4 Core 16 Sqmm] [PWD El Sch Page F-2 Item No- 1(a)]
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [4 Core 16 Sqmm] [PWD El Sch Page F-1 Item No- 2(b)]
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below a) 4 Core 16 Sqmm [ F-4/ 7(c)]
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials a) 4 Core 16 Sqmm [ F-5/8b]
PART B: CAMPUS ILLUMINATION Supply and Delivery of 1.1kV grade following XLPE Al Ar cable. (Make: Havells/ Polycab/ RR Kabel/ Gloster/ KEI) [NS] a) 4 Core 10 Sqmm
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core [4 Core 10 Sqmm] [PWD El Sch Page F-1 Item No- 3(a)]
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [4 Core 10 Sqmm ] [PWD El Sch Page F-2 Item No- 1(a)]
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [4 Core 10 Sqmm ] [PWD El Sch Page F-1 Item No- 2(b)]
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below a) 4 Core 10 Sqmm [PWD El Sch Page F-4 Item No- 7(a)]
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials a) 4 Core 10 Sqmm [ F-5/8b]
Fixing only flood light fitting with suitable tie clamps and MS flat for fitting on pole/tower or similar structure
Supply & Delivery of 200 W LED Flood Light Lumen Efficacy ≥ 110 , IP - 66, Aluminum Dia Cast Housing , Potted driver. 10KV SPD included With Minimum warrenty of 2 Years [Make- Philips/Wipro/Lighting Technology]
Supply & delivery of 240 V. 120 Watt. LED street light fittings complete with all accessories , IP 66 protection, out door luminaires incl. 10KV SPD included,Efficacy ≥110 LPW.[Make- Philips/Wipro/Lighting Technology]With Minimum warrenty of 2 Years
Supply and fixing of 210-220V, LED Bulk Head with IP66 protection and IK09 impact resistance suitable for surface and wall mounting applications[Make- Philips/Wipro/Lighting Technology]
Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [PWD El Sch Page G-3 Item No- (c)]
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below (Jindal/ Bhusan/ Bansal/ Utkarsh/ AM&NS) [PWD El Sch Page G-1 Item No- 2(a)]
Making soldered joints between conductors, conductors and air terminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint [PWD El Sch Page J-1 Item No- 5]
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. (Jindal/ Bhusan/ Bansal/ Utkarsh/ AM&NS) A) 40 mm dia (For Road Crossing) [PWD El Sch Page F-6 Item No- 11(c)]
Supply and fixing of 1Ph Timer for controlling od compound light costing of the following materials: a) 18inch x 12inch x 6 inch single door MS box 2mm thick powder coated- 1 Nos b) Digital Timer (make: Seimens/L-K/ GIC) - 1 No c) Two Pole MCB (210-220V/ 32A) (make: L&T/Seimens)- 1 Nos f) Two Pole Power Contractor required rating (make: L-K/ SEIMENS/ ABB)- 1 No g) 6A SPMCB (make: L-K/ Seimens) - 1 No h) ON (Green) (1 Nos) Indicating Lamp LED- 1 Nos i) Toggle Switch for Bypass Time Switch- 1 No. [NS]
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required a) 3 x 22/0.3 (1.5 sqmm) [PWD El Sch Page F-9 Item No- C(1/b)]
Supplying and fixing polythene pipe complete with fittings. 19mm heavy gauge Polythene Pipe [PWD El Sch Page K-2 Item No- 51]
Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting [PWD El Sch Page I-2 Item No- 16(b)]
Supply and fixing of 50mm x 6 mm thick 2 part clamp suitable for fixing of 40mm dia GI pipe angle to the GI octagonal pole having Min. 02 nos nut bolts.
Supply and fixing of 210-220V, 20-26 watt LED Post top Light fittings [Make- Philips/Wipro/Lighting Technlogy
Supply and fixing of 210-220V, LED bollard Light fittings [Make- Crompton MAYA I Model:LBLA1-10-CDL/ Equivalent Make of Havells/ Equivalent Make of Wipro)
(Rate should be quotated including all taxes and duties and GST)
M/S. ARUNA ENTERPRISE (BID ID -5620572)
R D Industrial (BID ID -5616901)
S D ENTERPRISE (BID ID -5598376)
RASH ELECTRICAL WORKS (BID ID -5630631)
S M CONSTRUCTION (BID ID -5621504)
KUNDU ENTERPRISE (BID ID -5605535)
SASTIK ENTERPRISE (BID ID -5605428)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .