Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC | L1 | Accepted-AOC Quoted rates of lowest bidder found reasonable hence accepted | |
| 2 | L2₹25.0 L+₹1.2 L (5.00%)Rejected-AOC | L2 | Rejected-AOC Quoted rates are high hence rejected | |
| 3 | L3₹25.6 L+₹1.8 L (7.49%)Rejected-AOC | L3 | Rejected-AOC Quoted rates are high hence rejected | |
| 4 | L4₹26.1 L+₹2.4 L (9.94%)Rejected-AOC | L4 | Rejected-AOC Quoted rates are high hence rejected | |
| 5 | L5₹26.7 L+₹2.9 L (12.4%)Rejected-AOC DOWN TOWN MEDICAL ROAD TAWANG DIST TAWANG ARUNACHAL PRADESH | TAWANG | TAWANG | ARUNACHAL PRADESH | L5 | Rejected-AOC Quoted rates are high hence rejected |
Tender Value
₹23.9 L
EMD Value
₹47,800
Closing Date
23 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mr GURUDAS GOLDAR, AE (CIV)
AGE (I) TAWANG Pin- 900198 C/o 99 APO
REPAIR/MAINTENANCE OF SANITARY FITTINGS, ROOF, TILING, DOOR/WINDOW, PAINTING, CLEANING OF SEPTIC TANK, SOAK WELL, SEWAGE LINE, DRAIN, FENCING, RETAINING WALL AND INTERNAL ELECTRIFICATION, WIRING AND REPLACEMENT OF SWITCHES, MCBs AND OTHER CONNECTED B
2023_MES_579372_2
8521/AGE(I)/TWG OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Tawang
REFER TENDER DOCUMENTS
5 documents required · 5 mandatory
₹500
AGE (I) TAWANG
₹47,800
17 Jun 2023
9 Mar 2023
31 Mar 2023
9 Mar 2023
23 Mar 2023
16 Mar 2023
9 Mar 2023 - 13 Mar 2023
Amount
Dismantling plain or corrugated steel sheeting any thickness, complete all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing, removing serviceable tiles to stores, complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each, complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking off shutters from frames) exceeding 1.5 sqmtr but not exceeding 4 sq m each, complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.
Materials and labour for preparing of new wooden surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Materials and labour for screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes/tiles, complete all as specified and directed.
Materials and Labour for 10 mm thick screeding of cement mortar (1:3) for fixing wall tiles as in dado/skirting, complete all as specified and directed.
Materials and Labour for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.
Materials and labour for Coloured Glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.
Materials and labour for providing Virified Ceramic tiles 10 mm thick (square/rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Materials and labour for 25 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggt as in sub bases of floor finished even and rough, complete all as specified and directed.
Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete all as specified and directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
Supply and fixing second class hard wood plain solid straight chowkhats and frame wrought framed rebated on the soild, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.
Supply and fixing 35 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.
Supply and fixing 30mm thick second class class hard wood glazed and skelton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.
Supply and fixing Mild steel butt hinges, medium weight, cold rolled 100 mm size, complete all as specified and directed.
Supply and fixing Mild steel butt hinges, medium weight, cold rolled 75 mm size, complete all as specified and directed.
Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed.
Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed.
Supply and fixing Aluminium handles, cast type, anodized, 125 mm size , complete all as specified and directed.
Supply and fixing Aluminium handles, cast type, anodized, 150 mm size , complete all as specified and directed.
Supply and fixing for 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.
Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.50sqm in each pane, complete all as specified and directed.
Materials and labour for rendering 15mm thick in cement morter (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Materials and labour for rendering 10mm thick in cement morter (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of cement primer on wall complete all specified and directed.
Materials and labour for preparing new surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L for Galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non abestos cement fibre board of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and directed.
Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white with "P" or "S" Trap front or back inlet fixing bolts, PVC seat cover complete and making all necessary connection as specified and directed.
Supply and fixing in repair, 10Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
Supply and fixing for 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.
Supply and fixing in repairs, 15mm cromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
Supply and fixing in repairs, Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
Supply and fixing in repairs, cromium plated Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and directed.
Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 630x450mm with coupling excluding taps, waste, chain and plug and porcelain stopper but including brackets white incl 32/40mmdia 90cm long PVC waste down pipe, complete all as specified and directed.
Supply and fixing in repairs, Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) incl setting the trap and pan in cement mortar (1:3:6) all round and "P" or "S" Trap, complete all as specified and directed.
Supply and fixing in repair, brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.
Supply and fixing in repair, Soap dish, viterous china white appx size160x160x90 mm complete all as specified and directed.
Supply and fixing in repair, Toilet paper holder, viterous china, box type fixed to walls with chroium plated (CP) brass screws complete all as specified and directed.
Supply and fixing in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of plaster/concrete surface of wall /roof/floor including necessary scafolding by brooming down, rubbing with steel wire brush, screeping down, smoke soot, moulds, moss and efflorescent salts and applying one coat of weather proof acrylic emulsion paint (exterior grade) in camouflage pattern over and including one coat of primer, complete all as specified and as directed.
M&L for complete removal of existing treatment and preparation of plaster/concrete surface of wall /roof/floor including necessary scafolding by brooming down, rubbing with steel wire brush, screeping down, smoke soot, moulds, moss and efflorescent salts and applying two coats of weather proof acrylic emulsion paint (exterior grade) in camouflage pattern over and including one coat of primer, complete all as specified and as directed.
Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for 100 mm thick, PCC type B-2, 1:2:4 (using 40 mm graded aggregate) as in footpath, hardstanding, finishing cement concrete surface by making impressions of expanded metal whilst the concrete is green, complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Materials and Labour for plain cement concrete 1:3:6, type C-1 (using 20 mm graded aggregate) as in surface channels and drains including necessary formwork complete all as specified and directed.
Materials and Labour for Extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds etc complete all as specified and directed.
Formwork to faces of walls, retaining walls, abutments, parapets & staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better rough finished surfaces of concrete flat, complete all as specified and directed.
Demolition and breaking up drain pipes 75/110 mm internal dia (SWG, AC or reinforce concrete) set in cement mortar including bedding and hunching complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 75 & 100 mm bore pipe as in surface channel and drain including necessary formwork complete all as specified and directed.
Dismantling of CI/PVC soil/waste, vent and rain water pipes of any dia and type incl all fittings complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110mm bore size complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 75 mm bore size complete all as specified and directed.
S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of 100/110 mm bore complete all as specified and directed.
S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of 75mm bore complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed.
S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access complete all as specified and directed.
S&F 75 mm bore PVC (SWR) vent cowl, complete all as specified and directed.
M&L Plain cement concrete (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , exceeding 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed.
M&L for loose filling with broken stone aggt of gauge 80 to 150 mm size in soakage pits/soak wells or any other place including spreading and leveling complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for like MH cover etc complete all as specified and directed.
M&L for Precast cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in manhole/drain cover slabs etc including necessary form work and set in cement mortar 1:4 complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)
TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spi-rally hooping for columns, hook-ing ends and binding with and including mild steel wire (an-nealed) not less than 0.90mm dia, complete all as specified and directed.
TMT mild steel bars 6 mm to 8 mm dia cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed 0.9 mm dia or securing with clips all as specified and directed.
Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound @ 3% by weight of cement or as per manufacturer’s instructions, finished fair and even without using extra cement complete all as specified and directed. (Note : WPC shall be measured & paid separately)
Supply only integral water proofing compound ISI Mark of approved make complete all as specified and directed.
Demolition of concrete in ground floor and pavings nexc 15cm thickness including floor finishes like tiles if any of any description (below or above ground level) complete all as specified and directed.
Cutting into existing manhole for connecting new drains and making good to pipes and rendering; cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified.
Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 3/4 section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 100mm dia of pipe complete all as specified.
Cleaning/clearing of IWC/EWC by roding, gully trap/floor trap incl CI pipe/PVC pipe upto first manhole by roding, taking out all residue incl waste and testing by pouring water after cleaning etc complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).
Cleaning of Cast iron/PVC Sewage/drain pipe fixed on wall of 75/150mm bore by roding taking out all residue from the lines/manholes including water depositing at a distance not less than 20 mtr in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch as well as around the manholes to make hygienic including excavation of ditch testing of line by furnishing water after cleaning etc complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).
Dewatering/Desludging & cleaning of manhole (1st manhole only) of any depth, any size, taking out water mixed with sludge and solid sludge incl any foreign materials such as stone, tree hedges etc, removing and depositing sludge aty a distance not less than 20 meter in a ditch incl necessary excavation of pit and covering with earth & spraying unslaked lime n the covered ditch as well as around the manholes with water after desludging complete all as specified and directed.
Cleaning/clearing of sewage line (incl manhole except 1" manhole) 75 mm to 350mm bore of any description under ground any depth, removing any type of blockage incl desilting, descaling and de-chocking from drain as well as from manhole with combined high pressure water jetting cum suction (vacum) type machine mounted on LMV/HMV having facility of high pressure vacum incl provision of hydrolic application through high pressure thermoplastic fiber base water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning incl cleaning of manhole, sludge water shall be disposed of directed incl taking of manhole cover and refixing the same after cleaning. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).
Taking out/pumping for Cleaning of accumulated sludge including contaminated sewage water from septic tanks/sokage well including inlet/outlet chambers after plugging in coming sewage lines through combined high pressure water jetting cum suction (vacum) type machine mounted on LMV/HMV and facility of high pressure vacuum and removing and dumping off the same in the tank to a place out side cantonment at the place marked for the purpose by local municipality or the authority conftolling the area complete all as specified and directed by Engr-in-Charge. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).
M&L for One coat painting of parking Lines, Dashes, Arrows, Letters, etc on Rigid/Road pavement and the like exc 10 cm wide with road/ pavement marking paint, white or golden yellow complete all as specified and directed.
M&L for One coat painting of parking Lines, Dashes, Arrows, Letters, etc on Rigid/Road pavement and the like n.exc 10 cm wide with road/ pavement marking paint, white or golden yellow complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
Materials and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing caping of suitable size on surface of wall including provn of PVC box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.One light/fan/call bell point controlled by one switch one way 5 Amps
All as per Item No. 88 above but for One 3/5 pin socket outlet 10 Amps on independent board
All as per Item No. 88 above but for One 3/5 pin socket outlet 10 Amps on the same board with other switches.
All as per Item No. 88 above but one modular socket 16 Amps on independent board with cable 4 sq mm size and earth wire 4 sqmm
Supply and fixing Modular Switch, 1 way, 10 Amps, 240 volts, 1 Module.
Supply and fixing Modular socket outlet, 2/3 pin, 10 Amps, 240 volts, 1 Module.
Supply and fixing Modular Socket, 20 Amps, 3/5 pin, 240 volts, 1 Module.
Supply and fixing Modular Switch, 1 way, 20 Amps, 3/5 pin, 240 volts, 1 Module.
Supply and fixing Ceiling rose surface bakelite 3 terminals 65x50mm all as directed.
Supply and fixing in repairs, decorative 20 Watt LED lighting fittings, fixed to walls/ceiling, environmental friendly, energy efficient ready to use pack complete all as specified and directed. (Make : Crompton. Cat No-CCS-100-20-65-HL2-DP-NWH or equivelent of Bajaj/Philips/ Havells)
Supply and fixing in repairs, Trim linea neu PC Batten, Compact appearance, simple and versitile in nature, efficient solution 10 Watt LED lighting fittings complete as specified and directed . Make : Crompton Cat No-CCS-102-10-65-SL-DP-NWH or equivelent of Bajaj/Philips/Havells.
Materials and labour for sub main wiring with two single core stranded copper conductor, FRLS PVC insulated cable 1100V grade, 6 sq mm, drawn through suitable size of non-metallic PVC casing caping with 6 sqmm copper conductor cable as earth conductor includingh accessories fixed up in surface including connecting up including taking down old sub main wiring complete all as specified and directed. (Note : One run PVC casing caping, one run main cable, one run neutral cable and one run of earth wire shall be measured as one length).
Materials and labour for sub main wiring with two single core stranded copper conductor, FRLS PVC insulated cable 1100V grade, 4 sq mm, drawn through suitable size of non-metallic PVC casing caping with 4 sqmm copper conductor cable as earth conductor includingh accessories fixed up in surface including connecting up including taking down old sub main wiring complete all as specified and directed. (Note : One run PVC casing caping, one run main cable, one run neutral cable and one run of earth wire shall be measured as one length).
Supply & fixing in repairs, Slim design LED recessed round polycarbonate housing down lighter 18 watt with superior light output and integral driver. (Make : Havells. Cat No-LHEBHDP51Z1W018 or equivelent of Bajaj/Philips/Crompton).
Supply and fixing in repairs, street Light fittings 35 watts, pressure die cast housing with integrated lences, high power, IP 66 protection complete all as specified and as directed. Make :Crompton. Cat No- TRP-400-35-57-SL-LM-NSR or equivelent of Bajaj/Philips/ Havells
Supply and fixing MCB distrubution board SPN 8 way double door, sheet steel, phosphatised, powder coated with 200 amps bus-bar, neutral link, earth bar and din rail 240 V, complete all as specified and directed.
Supply and fixing Sheet metal enclosure distribution box suitable for MCB, 4 way, TPN, 415 volts with 200 Amps rated bus bar double door complete all as specified and directed.
Supply and fixing MCB, Four pole, 240 volts, 63 Amps, 10 KA rupturing capacity, C series
Supply and fixing MCB Single pole & neutral, 240 volts, 32 Amps, 10KA rupturing capacity, C series
Supply and fixing MCB Single pole, 240 volts, 5 to 32 Amps, 10 KA rupturing capacity, C series
Supply and fixing in repair, Modular switch, 1way 6/10A,1 module
Supply and fixing in repair, Modular socket, 6A-2/3 pin combined 2 module
Supply and fixing in repair Multipurpose, Modular socket, 6/16A-2/3 pin combined 2 module
Supply and fixing in repair modular white cover plate with frame, 3 module ISI marked complete all as specified and as directed.
Supply and fixing in repair White cover plate with frame, 4 module ISI marked complete all as specified and as directed.
Supply and fixing in repair White cover plate with frame, 6 module ISI marked complete all as specified and as directed.
Supply and fixing in repair Metal flush box, 3 module ISI marked complete all as specified and as directed.
Supply and fixing in repair Metal flush box, 4 module ISI marked complete all as specified and as directed.
Supply and fixing in repair Metal flush box, 6 module ISI marked complete all as specified and as directed.
Supply only insulation tape of 18 mtr length of standard width (Make : Anchor or equivalent as approved)
Materials and labour for earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth wire 4.0 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 20 mm dia and connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 metre and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old one.
M/S GOLANG CONSTRUCTION CO.
MS TD CONSTRUCTION
M/S ACE BUILDERS
M/S TSERING DHONDUP
M/S RHEGON CONSTRUCTION
M/S T G ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .