Widening/Improvement of MRR via Chotta Shimla km 149/00 to 156/640 (SH C/O Breast wall Pedestal path, cutting work for providing separate Bus lane spot near HP Secretariat Between Rd. 152/330 to 152/380)(Under Smart City).

Amount

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (i)In cement mortar

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (i)All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(i)All kinds of soil. as directed by Engineer-in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (i)1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) as directed by Engineer-in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level(i) 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 20 mm nominal size) as directed by Engineer-in-charge

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm(One hundred milimetre) dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level (i) 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing RCC Drain Covers HD 20 of approved design and shape of outer frame size 600x600mm and 12mm thick and having openable cover of size 450x450mm including fixing in position complete in all respect including carriage of mterials in all leads and lifts as per directions of the Engineer-in-Charge.

Chequered terrazo tile 22mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) (i)Dark shade pigment using ordinary cement. as directed by Engineer-in-charge

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). as directed by Engineer-in-charge

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers pecifications.(i) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as directed by Engineer-in-charge

Disposal of excavated surplus earth by mechanical transport on approved dumping site surrounding Shimla through all mode of transportation including head load or mechanical means alongwith its levelling and top complete the work including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

DASU RAM

Ankit Sharma