PROVN OF RAIN WATER HARVESTING WITH PERCOLATION NEAR HANUMAN TEMPLE (ARJUN LINE) IN RA AT PULGAON MIL STN

Amount

M & L Earth work in excavation all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in any type of soil all as specified and directed.

All as per item No 1 above, but exc 1.5 m wide and not exceeding 3.0 mtr deep and getting out any type of soil complete all as specified and directed.

All as per item No 1 but exc 3.0 m wide and not exceeding 4.50 mtr deep and getting out any type of soil complete all as specified and directed.

M& L Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out any type of soil complete all as specified and directed.

M&L cement concrete type D- 2, 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L Brickwork with using fly ash bricks, straight or curved on plan exc 6m mean radius built in 1:6 complete all as specified & as directed

M&L for 300 mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified and as directed

Rendering 15 mm thick on fair faces of brick /concrete surfaces in cement mortar (1:4) mixed with water proofing compoud @3% by wt of cement, finishing the surfaces even and smooth without using extra cement.(Note:The quoted rate is deemed to include the supply of WPC).

M& L for Providing, Plain cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Providing precast cement concrete Type B1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc.) chajjas, shelves and similar articles with plain faces complete all as specified and divided.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work vertical or to batter fair finished surfaces all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),fair finished surfaces all as specified and directed.

M&L RCC Design mix M-25, using 20mm gradded stone aggregate as per design mix in basement of walls, ballast walls , footings and the like; any thickness; above top of footings; including attached pilaster and buttresses, etc complete all as specified and directed.

M&L RCC Design mix M-25, using 20mm gradded stone aggregate as per design mix in Slabs supported on walls, beams and columns in floors, roofs, landings, and the like complete all as specified and directed.

M&L RCC design mix M-25 using 20mm gradded stone aggregate as in pillars & columns etc

Form Work to sides of column & pillar, fair finished surfaces all as specified and as directed.

Material & Labour for applying Two coats of Epoxy water proofing paint over a coat of appropriate primer applied @ 0.90 litre/10 sqm over new surfaces as per manufacturer's instruction complete all as specified and directed.

M&L Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M & L for Sand cushing in floors or pavings,spread ,levelledand rammed including watering and consolidation complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick spread, levelled and rammed including wateringcomplete all as specified and directed.

M& L for Hardcore broken stone boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M& L for loose filling with pea gravel of size 1/8" to 3/8" as in filter bed deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed complete all as specified and directed.

Drilling of hole in any strata by mechanical percussion or rotary ring method below ground level including electric loging through any type of strata soil/rock disposal of soil with in 10 mtr keeping space for pea gravel packing and including lowering and extraction of perforated PVC pipe of dia 200mm complete all as specified and directed (PVC pipe will be paid separately)

S&F perforated PVC pipe 200mm dia in any length and fixed in any position including inverted earthern pots with hole on top complete all as specified and directed.

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified.

M&L Removing excavated material exc 250 m and not exceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S & F machine cut cudappah stone slab 20 to 25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing, polishing, nosing etc complete all as specified and as directed.

M&L for Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm screed bed CM 1:6 complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15 cm and getting out loose/soft soil / cutting bushes / shrubs, grass etc complete all as specified and directed

M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick walls or concrete surfaces complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement.

S&F for 75mm thick steel fibre reinforced (SFRC) drain cover slab with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton/Sqm in square, rectangular or circular shape complete all as specified & as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall 75mm bore for weep holes to drain all as specified & as directed.

M&L for 300 mm bore reinforced concrete pipe, class NP2, laid and jointed in CM 1:1 including PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & as directed.

Excavation in post holes (soft/loose soil) each not exceeding 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed wth earth around in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exc. 50m all as specified & as directed.

M&L for rolled mild steel work angle iron,MS flats including embeding in concrete and screwing etc including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as spd & directed.

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and staraining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as specified and directed (each line wire to be measured).

Supply only mild steel round bars 10mm dia as line bars for fixing chain link fencing

M&L for mild steel screwe bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n.exc 10cm long and dia of neck not less than 11mm to 15 mm all as specified & as directed.

Fixing only chain link fencing including line wire any mesh, size and type of standard rails straining bolts etc including provision of binding wire.

Supply only chain link MS galvanished fencing of any mesh size with 4mm dia GI wire all as specified & as directed.

M&L Preparation of new steel surface of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified & as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide on new steel surface not exceeding 10cm in width or girth when connected with other painting or when painted in different tint all as specified & as directed.

M&L for mild Steel works in steel gate 3.50 m wide and 2.0 m high in double leaf including foundation guide rails, stoppers , hinges, locking arrangements, handle etc complete all as specified and as directed.

M&L Reinforced concrete pipes, class NP-2 of 150mm bore laid and jointed complete with colars in cement mortar all as specified & as directed.

PCC (1:3:6) type C-2 using 40mm graded stone aggregate Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested;haunching against sides of 300 mm nominal bore of pipes after they are laid and tested in trenches complete as specified and directed.

PCC (1:3:6) type C-2 using 40mm graded stone aggregate Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested;haunching against sides of 150 mm nominal bore of pipes after they are laid and tested in trenches complete as specified and directed.

Preparing newly plastered surfaces of walls and applying two coats of cement based paint.

M&L Pre-cast (Factory casted) cement concrete Kerb block casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6, complete all as specified & directed.

Material & labour for Glozy finish concrete coloured tiles with pigment of tile size 300 mm x 300 m x 25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M40 grade with grey cement and no pigment for berms all as specified and directed.

M&L for 100mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base floor all as specified & as directed.

Supply,erecting and fixing in true vertical position,Decorative black tubular Cast iron pole 6 meter height, Dia 200mm with 02 nos arm of size 660x625mm with aluminium housing incl holder suitable for 02 nos 50 watt warm white LED bulb Crinkle black finish complete with Casting base dia 250mm, MS pipe of 88mm OD 3mm thickness and bracket having size 1200mm to 700mm length 42mm OD of pipe thickness 2.5mm including 2 core 2.5sqmm copper cable for connecting cable to LED BULB & Cable connector 2/3 Pin IP68 for connecting wire conductor of required sizes complete all as specified and directed Note: (a) Specification of aluminium housing will be as directed by eng in charge . (b) Excavation,earth work and PCC foundation will be measured and paid for separately. (c) The pole paint involving surface preperation, epoxy primer followed by topcoat painting deemed to be included in the unit.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete of stay assembly/pole foundation etc complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core all as specified & as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core all as specified & as directed.

Supply and fixing Double wall corrugated High Density POLYMER Ethylene (HDPE) pipe of dia size 50 mm as per IS 14930 (Part-2):2001, Laid in Trenches/floors and fixed on walls/poles, with and including necessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, complete all as specified and as directed.

Chhabra Enterprises (BID ID -3387348)

RAJ ENTERPRISES (BID ID -3388709)

MAHARASHTRA ENTERPRISES (BID ID -3387293)

M/s Dara Constructions, Pulgaon (BID ID -3387094)

M/S JAI BHAWANI CONSTRUCTIONS (BID ID -3387561)

M/S L M Chourasia (BID ID -3387625)

M/s Prakash Agencies (BID ID -3388646)

M/s MM TRADERS (BID ID -3389531)

Bidder Name

M/S L M Chourasia

RAJ ENTERPRISES

SHRI RANI SATI TRADERS

MAHARASHTRA ENTERPRISES

M/s Dara Constructions, Pulgaon

M/s Prakash Agencies

M/s MM TRADERS

M/S JAI BHAWANI CONSTRUCTIONS

Chhabra Enterprises