Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.9 Cr
EMD Value
₹14.9 L
Closing Date
2 Sept 2023, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Corporation Limited
Sri. Kadappa M Nayak
Providing and fixing PVC fills for IDCT-1 & IDCT-2 at YTPS site.
KPCL/2023-24/OW/WORK_INDENT396
KPCL/2023-24/OW/WORK_INDENT396
Open
Other Works
Two Tender Document System(Two Cover)
KPCL Executive Engineer PCM One Office YTPS Raichur
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
PQR-2: Work Experience: The intending eligible bidders as indicated in PQR(1) should have satisfactorily completed (at-least 90% of the contract value) as a prime contractor, at least one or multiple (maximum two) similar nature of work like supply and erection of PVC fills to Natural Draft Cooling Tower/Induced draft Cooling tower of Capacity 210 MW or above in Thermal Power Plant of value Rs.4.966Crores in case of single work order or collectively in case of multiple work orders (maximum two) not less than Rs.2.483 Crores in each work during the preceding five financial years i.e. 2018-19, 2019-20, 2020-21, 2021-22 and 2022-23. In proof of the same, the work done certificate issued by an officer not below the rank of Chief Engineer in case of KPCL/RPCL works and not below the rank of Executive Engineer/Competent Authority in case of State/Central Government/Government under taking/Public Sector Undertaking/Private Thermal Power Station in India as the case may be uploaded (The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY 2023-24).
PQR-3: Minimum quantity: The intending eligible bidders as indicated in PQR(1&2) should have satisfactorily executed a minimum quantity in supply & erection of 5000Cum quantity of PVC fills in any one of the preceding five financial years (2018-19, 2019-20, 2020-21, 2021-22 and 2022-23) in case of single work order or collectively in case of multiple work orders (maximum two) in NDCT/IDCT either by new construction or by maintenance work in the said financial years. In proof of the same, the work done certificate indicating the quantity executed issued by an officer not below the rank of Chief Engineer in case of KPCL/RPCL works and not below the rank of Executive Engineer/Competent Authority in case of State/Central Government/ Government under taking/Public Sector Undertaking /Private Thermal Power Station in India as the case may be uploaded.
PQR-4: Turn over: The intending eligible bidders as indicated in PQR(1) should have achieved at least in two financial years a minimum financial turnover of Rs.19.866 Crores during the previous five financial years (2018-19, 2019-20, 2020-21, 2021-22 and 2022-23). In proof of the same, intended eligible bidders as indicated in PQR(1) shall submit certified copy of Turnover or Profit and Loss account certificate duly certified by the Chartered Accountant shall be uploaded along with the Technical bid. (Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the FY 2023-24).
PQR-1: Manufacturer or authorized dealer of PVC Fills for Cooling Towers Or any individual-Class-I Registered KPWD contractor or equivalent to KPWD Class-I Contractor registered in other State Government/Central Government for executing the cost of work Rs.10Crores and above or Registered firms/Companies/any under taking Companies are eligible to apply. As a proof of this the intended bidder must upload the relevant documents.
PQR-5: Tenderers who meet the above specified minimum qualifying criteria in Para no.2,3 & 4 of PQRs, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity- (AxNx1.5-B) should be greater than the amount put to tender, were, A-Maximum value of works executed in any one year during the last five years (updated to 2023-24) price level taking into account the completed as well as works in progress.N-Number of years prescribed for completion of the works for which tenders are invited. B- Value of existing commitments and on-going works to be completed during the next 6 Months (0.5 year). Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent or self-declaration documents are to be uploaded for which Format is included in the Bid document.
PQR-6: Liquid assets availability of credit facilities of not less than Rs.3Crore. Credit lines/letter of credit/certificates from Nationalized Banks for meeting the fund requirement etc., shall be uploaded.
GST Registration certificate
Independent PF code.
The bidder shall upload the self-declaration as a) I/We have studied the site conditions, labour conditions and read the tender documents and related matters carefully and diligently and have submitted the Tender having studied, understood and accepted the full implications of the tender document. b) I/We hereby undertake to comply with the provisions of Provident Fund Act and have furnished the PF account Number. c) Bidder shall not be under declaration of Ineligibility for corrupt and fraudulent practices issued by the government of Karnataka/Government of India / by any registered authorities. d) None of the contracts of the bidder should have been terminated/foreclosed/EMD forfeited on account of his default in KPCL or elsewhere during last three years. e) The tender submitted has no conditions contravening the technical & commercial conditions of the tender.
Copy of PAN shall be uploaded
₹5,000
₹14.9 L
3 Aug 2023
3 Aug 2023
4 Sept 2023
14 Aug 2023
18 Aug 2023
Providing and fixing PVC fills for IDCT-1 & IDCT-2 at YTPS site.
Removing 6 layers PVC fills modules of various sizes at all elevation carefully from IDCTs without damaging drift eliminators, spacers, nozzles, distribution pipes, adjoining structures etc., Sorting ...
Providing, supplying PVC fills sheets and fabricating to the size 2600mm x 308mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confi...
Providing, supplying PVC fills sheets and fabricating to the size 1800mm x 308mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confi...
Providing, supplying PVC fills sheets and fabricating to the size 2700mm x308mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confir...
Providing, supplying PVC fills sheets and fabricating to the size 1885mm x308mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confir...
Providing, supplying PVC fills sheets and fabricating to the size 1710mm x 88mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confir...
Providing, supplying PVC fills sheets and fabricating to the size 1710mm x 376mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confi...
Providing, supplying PVC fills sheets and fabricating to the size 2670mm x 308mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confi...
Providing, supplying PVC fills sheets and fabricating to the size 2050mm x 428mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confi...
Providing, supplying PVC fills sheets and fabricating to the size 2050mm x 440mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confi...
Providing, supplying PVC fills sheets and fabricating to the size 1710mm x 150mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confi...
Providing, supplying PVC fills sheets and fabricating to the size 2050mm x 70mm x 300mm and shape as per drawing. The fill material shall be of virgin PVC, U.V. stabilized with titanium dioxide confir...
Erecting the released reusable PVC fills module after cleaning with water jet and chemicals if required, reconditioning to the required size if any, placing in position at all elevations in line with ...
Erecting the newly fabricated PVC fills modules of all the sizes to suit site conditions, placing in position at all elevations in line with adjacent PVC fills without damaging/ disturbing distribitio...
Transporting the PVC fills from RPCL store yard including loading & unloading, fabricating PVC fills to module to the required size and shape as per drawing with necessary gluing chemical Cyclohexanon...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Doc YTPS Fills- 02.08.2023.pdf
Tender Document • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .