SPECIAL REPAIRS TO BLDG NO J4 AT PLASSEY LINES AT 3TB NCC AND MD ACCN BLDG NO 29 1 to 8 OF 2ND LANCER AT UMRAO LINES UNDER GE NORTH SECUNDERABAD

Amount

Taking down chowkhats or frame not exc.1.50 sqm each but with shutters (without taking of shutters from the frame) of any description complete all as specified and as directed.

All as per Item No 1 above but area exceeding 1.50 sqm but not exceeding 4 sqm each complete all as specified and as directed.

S&F anodised aluminum frame for doors, windoors, ventilators with on or more rebates including Joining cleat for fixing etc complete all as specified and as directed.

All as per Item No 3 above but fixing only after necessary repairs complete all as specified and as directed.

S&F anodised aluminum frame for door shutters, aluminium section, weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber neoprene, packing, handles 02 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F anodised aluminium frame for window &ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and as directed.

All as per Item No 7 above but 4.80mm thick sheet glass complete all as specified and as directed.

S&F 12mm thick prelaminated particle board, interior grade, prelaminated in both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and as directed.

Dismantling of wall or floor or hearth tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for Non skid ceramic coloured joints free tiles 7 to 8 mm thick area of each tile exc 0.11 but n exc 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and as directed.

M & L for Screed bed or bedding layer of cement mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M & L rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including taking down existing plaster and mixing of water proofing compound, as per manfacturer instructions finished even and fair complete all as specified and as directed. NOTE: WPC will be measured and paid separately

Dismantling of false ceiling of any description including cover fillets complete all as specified and as directed.

S & F 605 X 605mm anodised aluminium snap grid frame work for false ceiling all as specified including 4mm thick non asbestos fibre cement bldg boards inserted aluminium frame work with screws and three coats of white wash on ceiling complete all as specified and as directed.

S&F in repairs wash down china water closet pan (pedestal pattern) including supply & fixing 10 lit capacity flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete all as specified and as directed.

S & F in repairs, vitreous china wash basin, white, flat back of size 550x400mm with brackets, including cutting for & pinning in ends of brackets, with waste fitting, PTMT 32mm dia with CP pillar tap 15mm bore complete all as specified and as directed.

Supply 10 litre capacity PVC low level flushing cistern including brackets complete, fixed in repairs complete all as specified and as directed.

Supply and fixing 32mm dia GI waste pipe for wash hand basins complete all as specified and as directed.

Taking down shutters of any description .exc 1.0 Sqm but not exc 2.0 sqm each complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 100mm long MS butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&FAluminium alloy,300 mm long anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

M&L for applying two coats of synthetic enamelled paint over a coat of pink primer over wood & wood based materials of any description, not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

Demolition of brick work or stone boulders masonry built in Cement Mortor (or) cement lime mortor including all quions, arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exceeding 6m mean radins built in cement mortar 1:6 complete all as specified and as directed.

M & L for brick work with fly ash bricks, straight or curved on plan to any radious as in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

M&L for rendering 15mm thick on brick masonry surfaces or concrete surfaces in CM 1:6 including finished the surface smooth and even wihtout using extra cement complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L for two coats of white wash on walls including preparation of old surfaces complete all as specified and as directed.

M&L for two coats of distemper over priming with alkali resistant priming paint including complete removal of existing treatment on wall surfaces complete all as specified and as directed.

Demolition of concrete of any description and in any position as in sunken floors, roofs along with any type of treatment etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 as in saucer drain complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below & above ground level) complete all as specified and as directed.

M & L 40 mm thick PCC 1:2:4 type B1 finished even and smooth as in floor topping complete all as specified and as directed.

M&L for PCC type D2 1:4:8 (40mm graded stone aggregate) 75mm thick as in sub base complete all as specified and as directed.

S & F Non skid coloured ceramic tiles 300x300mmx 7 to 8mm thick (square or rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match over. Screed bed or bedding layer of cement mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Supply and fixing glass dividing strips 3 mm thick 38 mm wide complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed

M & L chequered cement concrete tiles with white cement and pigments over 20mm thick screed bed in CM 1:6 complete all as specified and as directed. Note: The size of tiles shall be as directed by E-in-Charge.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver blocks of 60mm thick with grey cement and pigment over sand cushioning 50mm thick complete all as specified and as directed. Note: Sand cushioning shall be included in the unit rate quoted.

Dismantling of RCC / wood fencing post of any description complete all as specified and as directed.

S & F MS angle iron post and struts including flat iron fillets etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F MS nut bolt not exceeding 15cm long and diameter of neck 12mm complete all as specified and as directed.

S & F MSGI chain link fencing any size or type complete all as specified and as directed.

S & F in repairs barbed wire fencing complete all as specified and as directed.

M&L MS framed work as in doors and chowkats or gates of angles or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings (exclusive of steel sheeting or other covering) of grade Fe-410-w Gde-250, Quality 'A' complete all as specified and as directed.

Dismantling of structural steel of any description complete all as specified and as directed.

Dismantling of roofing sheets of any description complete all as specified and as directed.

S & F MS rolled section as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates conforming to Fe-410-W.Gde E-250 ,Quality ' A ' complete all as specified and as directed.

S & F pre painted gal valume aluminum Zinc coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on steel surface of any description over 10cm width or grith including preparation of new surfaces and applying one coat of Red oxide primer complete all as specified and as directed.

M&L for preparation of old surfaces of wall by washing rubbing down and stopping and applying two coat of distemper oil emulion of any colour complete all as specified and as directed.

M&L for applying two coats of cement base paint including preparation of newly plastered wall surfaces complete all as specified and as directed.

M&L for applying two coats of synthetic enamelled paint over a coat of pink primer over wood & wood based materials of any description, not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

Dismantling water tanks, exceeding 250 & not exceeding 500 litres capacity & & S & F 500 litres capacity, rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position in SSR Part-I complete all as specified and as directed.

S &F 75mm bore PVC waste pipes fixed in walls / floors complete all as specified and as directed.

S & F 100mm dia CI soil pipes complete all as specified and as directed.

S & Fixed in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1 complete all as specified and as directed. .

S & F in repairs urinals vitreous China bowl flat back, size of 465 x 355 x 265 mm white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S &F in repairs CI vent cowl 75 mm dia complete all as specified and as directed.

Taking up & down steel tubing & connections including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed.

Taking up & down steel tubing & connections including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed.

S & F GI water tubing 20mm bore medium grade with all fittings complete all as specified and as directed.

S & F GI water tubing 15mm bore medium grade with all fittings complete all as specified and as directed.

S & F bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia chromium plated, fancy type complete all as specified and as directed.

S & F in repairs angle stop cock chromium plated, fancy type 15mm bore cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S &F aluminium fixed partition with standard sections including 12mm thick prelaminated particle board and 5mm thick glass including rubber beading etc complete all as specified and as directed.

S &F aluminium door using standard sections including 12mm thick prelaminated particle board and 5 mm thick glass including floor spring, aluminium hardware fittings etc complete all as specified and as directed.

S & F in repairs 15 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M&L for providing Cement concrete in lintels upto 1.5m span, cills, copings, bed plates etc including necessary form work type B1 1:2:4 (20mm graded aggregate) complete all as specified and as directed.

Supply and fix in position mild steel TMT bars of 10 mm dia and over as in reinforcement cut to length, bent to shape required, including cranking, hooking ends and binding with including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed

S &F 20 mm thick 2nd class Hard Wood teak wood plank as in shelves complete all as specified and as directed.

S &F aluminium anodised curtain rod of 20mm bore complete all as specified and as directed.

S & F aluminium curtain brackets / ends complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples complete all as specified and as directed.

Supply only 15mm dia CP Pillar tap fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

M &L for two coats of white wash on ceiling including preparation of old surfaces complete all as specified and as directed.

Supply and fixing 40mm high density polyethylene pipe (HDPE) of pressure rating 6 Kg/ Sq cm fixed complete to walls ceiling or in floors etc complete all as specified and as directed.

M & L Rendering 10mm thick in CM 1:4 on brick on concrete surface as backing coat of tiles complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware AC or Reinforced concrete) set in cement mortar 100mm dia complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware AC or Reinforced concrete) set in cement mortar 75mm dia complete all as specified and as directed.

S & F PVC (SWR) bends any radius 75mm bore provided with access door complete all as specified and as directed.

S & F PVC (SWR) bends any radius 110mm bore provided with access door complete all as specified and as directed.

S & F PVC (SWR) branch piece with access door single 'Y' equal or un-equal 75mm bore complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ laid in floor, 110mm bore complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ laid in floor, 75 mm bore complete all as specified and as directed.

Supply & fixing in repair PVC (SWR) branch piece, single (single Y or T etc) equal or unequal 110mm dia with access doors complete all as specified and as directed.

S & F PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F in repairs Viterious china Squating pan orissa pattern size 580 x 440mm white with intregral foot rest including connection to trap, and to flush pipe anti syphanage pipe etc complete all as specified and as directed.

S&F in repairs 125mm dia brass chromium plated shower rose with swivel joints fixed complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe including dismantling of existing water tank of any description complete all as specified and as directed.

M&L for PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and is specified

M&L for PCC 1:2:4 type B0 using 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors complete all as specified and as directed.

S & F in repairs 32 mm dia GI pipe medium grade in short lengths for spouts including cutting holes in walls and making good with CM (1:3) complete all as specified and as directed.

M & L for application of one coat of water based bitumen emulision primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust & dirt. Lay water proofing treatment with polymetric memberane 3 Kg/ sqm standard consisting of 90 micron, HMHDPE torch on memberane over a coat of blown bitumen 85/25 @ 1.2 Kg/sqm on top of memberane and providing 25 mm thick sand cushioning to recieve lean concrete in sunken floor complete all as specified and as directed.

M & L for Rendering 5mm thick on concrete surfaces in cement mortar 1:3 in ceilings and finished even and smooth without using extra cement and including taking down existing plastering complete all as specified and as directed.

M &L for three coats of white wash on ceiling including preparation of new surfaces complete all as specified and as directed.

M &L for three coats of white wash on walls including preparation of new surfaces complete all as specified and as directed.

M & L for 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, fixed in repairs complete all as specified and as directed.

S&F in repairs brass chromium plated Tubular towel rail 20mm dia D Type 60cm long between flanges complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from wooden/metal frame glazed with putty or fixed with beads complete all as specified and as directed.

S & F in repairs Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with stainless steel wire staples complete all as specified and as directed.

Taking down chowkats with shutters (w/o taking of shutters from the frame n.exc 1.50 Sqm each complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube supplying & fixing in openings as per specification & drawaings complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per drwaings and specifications complete all as specified and as directed.

S & F stainless steel butt hinges 100mm long with stainless steel hinge pin complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt 150mm size of extruded section complete all as specified and as directed.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and as directed.

S&F framed work such as grills framed guard bars etc with end of bars shouldered riveted or angle into spikes framed guard bars ,and similar work conforming to grade Fe 290-0 Gde -E -165 complete all as specified and as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty/beads in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.

S&F in reapirs 18/19mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. .

Supply only water proof compound complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring on concealed conduit with 1.5 Sq mm, FRLS, copper conductor single core PVC insulated unsheathed 1100 Volts multistranded FRLS confirmimg to IS-694 drawn through and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes suitable for MODULAR swiches size and duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for fixing switches / sockets/ regulators including fixing all accessories etc including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed for the following :- (a) One light/ Bell point controlled by one, one way switch 5 amps, SP

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One light point controlled by two, two way switch 5 amps .

All as per Sl item No 123 here in before but using 2.5 Sqmm, FRLS, single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade FRLS for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor complete all as specified and as directed.

Supply and fixing ceiling rose surface PVC polycarbonate, isolated body 3 terminals complete all as specified and as directed.

Supply and fix in replacement Switch MODULAR 1 WAY 6 amps, 1 module complete all as specified and directed.

Supply and fix in replacement Switch MODULAR 1 WAY 16 amps, 1 module complete all as specified and as directed.

Supply and fix in replacement Switch MODULAR two way 5 amps, 230 volts, 1 module complete all as specified and directed.

Supply and fix in replacement Modular bell push 6 A 1 Module complete all as specified and as directed.

Supply and fix in replacement MODULAR socket 2/3 pin 6 amps 2 MODULE, 230 Volts complete all as specified and as directed.

Supply and fix in replacement MODULAR socket 2/3 pin 16 amps 2 MODULE, 230 Volts complete all as specified and as directed.

Supply and fixing electronic dimmer modular type ceiling fan regulator AC 230 volts complete all as specified and as directed.

Supply & Replace Modular White cover plate with frame of 1 Module complete all as specified and as directed.

Supply & Replace Modular White cover plate with frame of 2 Module complete all as specified and as directed.

Supply & Replace Modular White cover plate with frame of 3 Module complete all as specified and as directed.

Supply & Replace Modular White cover plate with frame of 4 Module complete all as specified and as directed.

Supply & Replace Modular White cover plate with frame of 6 Module complete all as specified and as directed.

Supply & Replace Modular White cover plate with frame of 12 Module complete all as specified and as directed.

Taking down the geyser of 25 /35 litres capacity from its mounting by removing all water and electric connection and disassembling the geyser, Descaling cleaning the inner tank thoroughly and there should not be any bad test of water. Examining the water tightness of storage tank after cleaning. Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. Inspection of pilot lamps. Reassembling the all the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and hydraulic testing. Re-fixing the Geyser and making electric connection, water inlet and outlet connection and testing and checking of all the functioning of water inlet outlet valves connected with geysers complete all as specified and as directed. Note : Replacement of defective/worn out parts will be measured & paid for separately

Supply and fix rubber PVC gasket to ensure water tightness for 25 liters capacity complete all as specified and as directed.

Supply & fix MS base plate including load relay of any type with inlet and outlet pipes of suitable size and model of venus with screws as per requirement complete all as specified and as directed.

Supply & fix heating element of the 2KW rating as required at site including rubber washers of any make and type complete as per sample complete all as specified and as directed.

Supply & fix Steel inner tank of 25 litre capacity geyser tank by made out of steel sheets appropriate thickness complete all as specified and as directed.

Supply & fix thermostat for the geysers of the 25 to 35 Liters capacities complete all as specified and as directed.

Supply and fix in replacement PVC connecting tube 450 mm long with two brass adopters suitable hot water for 15 mm dia pipe and fixing in position ,superior quality complete all as specified and as directed.

Supply & Replace Air Release Valve of Existing Size complete all as specified and as directed.

Supply and Replace Indication lamp of Existing Size/Model (Set of Two) Red & Green complete all as specified and as directed.

S&F in replacement of 1100 Volt grade cable flexible 3 core PVC insulated PVC sheathed with stranded copper conductor of size 2.5 sqmm complete all as specified and as directed.

Supply & fix exhaust fans, metal body, 300 mm sweep, 900 RPM, AC single phase 230/ 240 V with louver opening in wall and fixing arrangement with bolts and nuts and making good the distrubed surface complete all as specified and as directed.

Supply and fix LED Integrated batten T5 Indoor decorative PVC extruded T5 LED Battens Size - 2 FT 1x10 watt and colour white etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Havells-LUMILINEPLUBS10WLED865PCSS ,or Crompton - LDL-10-WW or equivalent in Wipro, Bajaj

Supply and fix LED Integrated batten T5 Indoor decorative extruded aluminium heat sink for heat dissipation T5 LED Battens Size - 4 FT 20 watt and colour white etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Havells-REGALBATTENT8UPTO1X22WDSBSWH, Tube- PHOTONULTRAE 201213T8SSTL20LED865SPC or Crompton - IGP161LT8-16, TUBE- LT8-20-865-(2) or equivalent in Wipro, Bajaj

Supply and fix in replacement wall mounted battele LED light fitting 10 watts with accessories including 01x10 LED (B22) bulb complete all as specified and as directed. Make - Havells cat No- LHDL07150099 or equivalent in HPL / Bajaj

Supply and fix in replacement of security light luminaire LED 1x25 watts with deep drawn housing including all accessories with suitable 36 mm dia GI bracket 0.60 mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and as directed. Make: Havells- ENDURAPEARLSL25WLED757SASYTOPCMP or Crompton - LST-25-CDL-M or equivalent in Wipro/ Bajaj

Supply and fix in replacement of sheet steel MS enclosure earth plug socket 2 pin 20 amps with metal 20 amps with MCB 20 amps complete all as specified and as directed.

S & F Vertical type, MCCB DB TPN 4 way, double door, with 200 Amps rated bus bar, suitable for and including incoming MCCB TP 415 volts AC 3 phase 50 Hz 10 KA with fixed magnetic setting for current ranging of capacity 63 Amps (MCCB TP confirming to IS 13947 (P-2) IEC:947) made out of CRCA sheet housing with powder coating & conforming to IS 13032, IS 8623, BS 5486 accomdated suitably in a MS enclosure weather proof made out of 3 mm thick MS sheet having hinged and robust locking arrangement including painting by red oxide primer one coat and overall powder coated complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 12 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SPN 240 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and as directed.

S & F MCB SP 240 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and as directed.

S & F MCB SP 5 to 30 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed.

M & L Submain wiring with 2 runs of single core 6 sqmm, FRLS, PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit conclead and conduit accessories of medium grade not not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and as directed. Note: 3 runs of 6 Sqmm wire and one run of PVC conduit shall be measured as one unit length.

Material & Labour for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore light grade all as specified in Electrical plate of SSR Part I, 2009 complete all as specified and as directed. Note : The unit rate shall also including for excavation, earth work in hard/dense soil.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earting etc as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed.

S & F switch piano two pole flush type 5 amps, 230 volts complete all as specified and as directed.

S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and as directed.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush typewith fuse and neon indicator complete all as specified and as directed.

S & F bell push 5 amps single pole flush type complete all as specified and as directed.

S & F electric Ding Dong bell AC 230 volts single pole complete all as specified and as directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden/PVC round blocks complete all as specified and as directed.

S&F electronic dimmer type ceiling fan regulator AC 230 Volts complete all as specified and as directed.

Supply and replace LED Lamp 9 Watts complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system including taking down the old unservisable DBs complete all as specified and as directed.

S & F MCB SPN 240 volts 'C' curve suitable for fixing in MCB DB of capacity 40 amps including taking down the old unservisable MCBs complete all as specified and as directed. Make: Havells - CAT Part No DHMGCSNF040 or equivalent in HPL/ STANDARD- DSMGCSNF040 or L&T - BB20400C as approved by GE

Supply & fix ceiling fan of size 1200mm sweep, 230 V,ISI marked including necessary connection with 0.5 sqmm 3 core flexible wire from ceiling rose to fan connector including fan hook MS powder coated down rod of suitable length as required at site complete all as specified and as directed. Make: Havells : ES-50 Premium/ Bajaj : Electra 50 & Standard : SS- 50

Supply & Install Water heater (Geyser) storage type, of capacity 25 Ltrs, working on 230 V AC supply, with in & out water connecting pipes( Hot & cold), making good the distrubed wall surface complete all as specified and as directed. Make: Havells, Cat No- GHWAMGTWH025 or its equivalent in CG, Racold.

S&F PVC connecting pipe 45 cm long with two Nos brass check nuts and rubber washers suitable for 15mm dia GI pipe for hot water connection for geysers complete all as specified and as directed.

S & F Single pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one sing pole MCB 20 Amps complete all as specified and as directed.

S&F Gun- metal gate valves 15mm with iron wheel head ,screwed both end for iron pipe and fixed complete all as specified and as directed. Make : Zoloto/Kartar/Sant

Cutting of existing GI tubing in any location / position and inserting reducer Tee of 20x20x20 mm complete all as specified and as directed.

M/s GM Constructions