Creation of 220kV substation Nonand (Rohtak)

a) 160 MVA 220/132 kV Power Transformer along with 10% extra T/F oil) ( to be supplied by HVPNL)

b) NIFPES for 160 MVA T/F ( to be supplied by HVPNL)

a) 100 MVA, 220/33 kV Power Transformer along with 10% extra T/F oil ( to be supplied by HVPNL)

b) NIFPES for 100 MVA T/F ( to be supplied by HVPNL)

4MVA 33/11kV T/F ( to be supplied by HVPNL)

220 kV SF-6 Breaker along with 20% extra SF-6 Gas

220 kV Isolator with E/Switch

220kV Isolator without E/Switch

220 kV Surge Arrestor

220 kV Post Insulator

220 kV CTs for line & bus coupler (1200-800-400/1-1-1-1-1A)

220 kV CT for Transformer (450-300/0.577-1-1-1-1A)

220 kV CVT ( to be supplied by HVPNL)

a) 220kV C&R Panels for Line Protection & Circuit Breaker control panel ( with auto reclose)

b) 220kV C&R Panels for Transformer protection & Ckt breaker control Panel (without auto reclose ) for both HV & LV side of 220/132kV T/F.

c) Transformer protection & Ckt breaker control Panel (without auto reclose ) for both HV & LV side of 220/33kV T/F.

d) Transformer protection & Ckt breaker control Panel (without auto reclose ) for HV side of 220/33kV T/F ( for Hot T/Fs)

e) Bus Coupler cum Bus Bar Protection & Ckt breaker control Panel without auto reclose (Double Bus bar)

220 kV NCT (450-300/1A)

132 kV SF-6 Breaker with 20% extra SF-6 Gas

132 kV Isolator with E/SWITCH

132 kV Isolator without E/SWITCH

132 kV Surge Arrestor

132 kV Post Insulator

132 kV CT For Line (600-300-150/1-1-1A)

132 kV CT For Bus Coupler (750-500/1-1A)

132 kV CT For Transformer I/C (750-500/0.577-1-1-1A)

132 kV CVT For Line

a) 132kV C&R Panels for Line Protection & Circuit Breaker control panel ( without auto reclose)

b) 132kV C&R Panels for Bus Coupler Protection & Ckt breaker control Panel without auto reclose (Double Bus bar)

Time synchronization equipment

33 kV LA’s

33 kV NCT For 220/33kV T/F (2000-1000/5A)

33 kV NCT for 33/11kV 4MVA T/F (100-50/5A)

11kV I/C 400 A VCB for 33/11kV 4MVA T/F ( CT ratio 300-150/5-5-1A)

11kV O/G 400A VCB for 33/11kV 4 MVA T/F

11kV NCT for 33/11kV 4 MVA T/F (300-150/5)

11kV LA for 33/11kV 4 MVA T/F

21.744 MVAR 33 kV rating Capacitor Bank with 33kV L&E Switch, NCTs and 33kV LA etc. with allied equipment and supporting structures as per technical specification

220V 200 AH Battery

220 V Battery charger

220 V D.C.D.B. suitable for 200AH Battery

415 V LT AC MCCB Board 500 A

33/0.4 kV Station Transformer 200 KVA with CSP.

100 KVA DG Set along with associated accessories

1.1 kV Copper Control Cable Armoured for 220 kV bays of size 2CX6mm2, 7CX4mm2, 4CX4mm2, 2CX4mm2, 16CX2.5mm2, 10CX2.5mm2, 7CX2.5mm2, 3CX2.5mm2 including Junction box (as per section-6 of copper control cables specifications and Section-7, switchyard erection).

1.1 kV Copper Control Cable unarmoured for 132 kV bays of size 2CX6mm2, 7CX4mm2, 4CX4mm2, 2CX4mm2, 16CX2.5mm2, 10CX2.5mm2, 7CX2.5mm2, 3CX2.5mm2 including Junction box (as per section-6 of copper control cables specifications and Section-7, switchyard erection).

1.1 kV Copper Control Cable Armoured (FRLS type) for 33 kV GIS bays of size 2CX6mm2, 7CX4mm2, 4CX4mm2, 2CX4mm2, 16CX2.5mm2, 10CX2.5mm2, 7CX2.5mm2, 3CX2.5mm2 including Junction box (as per section-6 of copper control cables specifications and Section-7, switchyard erection).

650/1100 Volts 3.5 core 240 mm2 aluminium power cable from Aux. Transformer to ACDB

650/1100 Volt 3.5 core 70 mm2 aluminium cable for oil filtration set.

650/1100 Volt 4 core 16 mm2 armoured copper power cable for MLDB and other cable required as per contract for 220kV bays.

650/1100 Volt 4 core 16 mm2 unarmoured copper power cable for MLDB and other cable required as per contract for 132kV bays.

850/1100 Volt 4 core 16 mm2 unarmoured copper power cable for MLDB and other cable required as per contract for 33kV GIS bays.

11 kV Power Cable XLPE 3C x400mm2 for 33/11kv 4MVA T/F to 11kV incomer with termination kit for both ends

Earthing Mat Material. The earth mat will be designed / quoted for soil resistivity of 50ohmm. In case soil resistivity is more than 50ohmm then the earth mat will be designed for actual soil resistivity. The payment of extra material to be used for earth mat shall be made on pro rata basis. The approximate area of earth mat to be laid is given in the corresponding columns of the substations. However, item will remain a Lot item. 38575sq meter (approx)

Fire Fighting equipments as per section-6 a)22.5 Kg Capacity FE CO2 type, Trolley Mounted

b) 25 Kg Capacity FE DCP type, Trolley Mounted

c) DCP 9 Kg Capacity, Wall mounted

d) FE CO2 6.5 Kg Capacity, Wall mounted

e) DCP 6 Kg Capacity, Wall mounted

f) Foam Type 9 Litre Capacity, Wall mounted

g) Water CO2 9 Litre, Wall mounted

h) Fire Buckets(12 No.s with stand in one set)

Supply and installation of 2 fittings of 240W LED lamps with all accessories for Complete lighting of outdoor Switch yard area including all accessories, cables etc. as per clause 16.0 of section 7 of the specifications.

Complete lighting of road and street by providing 90W LED lamps on tubular steel poles at a distance of 15meter along the roads and streets including all accessories, cables etc. as per clause 16.0 of section 7 of the specification

(A) Supply and installation of 35W LED tube fitting on tubular steel poles along Fencing/ boundary wall at a distance of 30 meter including all accessories, cables etc. as per clause 16.0 of section 7 of the specification.

(B)Supply and installation of post top lantern 40W LED Lamps with all complete accessories at the entrance gate of sub-station.

High wall type split AC unit of 2 Ton capacity for computer room (as per technical specification)

Testing of IUM System at NABL accredited lab

Complete substation automation system for 220/132/33/11 kV substations including hardware (along with transducers) for 9 No. 220 kV, 9 No. 132kV 13 No. 33kV & 11kV Incomer present bays and software (for present bays as well as 13 no. 33kV future bays) along with associated equipment for the bays (bay as defined in the technical specification, sec sub-station automation system) as per technical specification.

Concrete AC Kiosk for the bays (bay as defined in the technical specification, sec sub-station automation system) as per technical specification. Note:-i) for 33kV GIS, the Protection system & Automation is a part of 33kV GIS and as such 33kV Protection system shall not be part of AC Kiosks. ii) The design of AC kiosk to accommodate 220kV & 132kV Control & Relay Panels, alongwith PLCC & RTCC panel, wherever employed shall be finalized during detailed engineering ( which is in the scope of bidder) & the bidder has to consider the total cost of providing AC kiosk in his price schedule and no addl. cost shall be made later on this account.

Bolted type 220 kV single tension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connection and tension clamp set suitable for twin Tarantula (string).

Bolted type 220 kV single suspension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connection suitable for twin Tarantula (string).

Bolted type 220 kV Single tension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connections and tension clamp sets suitable for single Tarantula (string).

Bolted type 220 Single suspension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connections and suspension clamp sets suitable for single Tarantula conductor.

Bolted type 132 kV single tension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connection and tension clamp set suitable for twin Tarantula (string).

Bolted type 132 kV single suspension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) per string with all hardware accessories including ball & socket connection suitable for twin Tarantula (string).

Bolted type 132 kV Single tension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connections and tension clamp sets suitable for single Tarantula (string).

Bolted type 132KV Single suspension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connections and suspension clamp sets suitable for single Tarantula conductor.

Bolted type 33 kV single tension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connection and tension clamp set suitable for twin Tarantula (string).

Bolted type 33 kV single suspension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 9000 kg) with all hardware accessories including ball & socket connection suitable for twin Tarantula (string).

Boltless C-type Wedge connectors matching with conductor size.

Copper lugs glands, PVC ferrules for control cabling.

Fiber cleats, Aluminium clamps, bolts, nuts, washers etc for fixing control cables in trenches

Galvanised iron perforated tray with side coupler plate bolts, nuts, washers and clamps etc. of size 150x25x2 mm, 100x25x2 mm and 75x25x2 mm and G.I conduits of 50/100mm diameter from equipment to main trench as per Section-7 for Switchyard erection.

2.5” dia HDD/PVC pipe for 4Cx4mm2 control cable from CT, VT to metering system as per Section-5, Chapter-5.

AAC Tarantula Conductor

7/3.15 GS Earth wire (to be supplied by HVPN)

Spacers for Twin Tarantula conductor

U-bolt 20mm dia

‘Lattice type steel structure for 220 kV Substations Nonand. Supply of material, preparation of fabrication drawing, galvanizing and delivery of lattice type steel structure for tower and beams for 220/132/33 kV switchyard fabricated from steel conforming to IS: 2062 including nuts-bolts gusset plates foundation bolts and other accessories as per drawings supplied by the owner. Main Substation tower and beam Tower type AT-1

Tower type AT-3

Tower type AT-4

Tower type AT-6

Beam type AB-1

Beam type AB-2

Tower type BT-1

Tower type BT-3

Tower type BT-4

Tower type BT-6

Beam type BB-1

Beam type BB-2

Tower type CT-4

Tower type CT-5

Beam type DD-1*

220 kV CT drawing No. HTD/ST-147

220 kV NCT drawing No. HTD/ST-150

220 kV PT/CVT drawing No. HTD/ST-147

220 kV PT/CVT drawing No. HTD/ST-147 Note: ( 2no. to be supplied by HVPNL)

220 kV surge arrestor drawing No.HTD/ST – 93R

220 kV Bus Post Insulator drawing No. HTD/ST-116

220 kV Isolator/L&E drawing No. HTD/ST-170

132 kV CT drawing No. HHW/ST-67

132 kV CVT drawing No. HHW/ST-67

132 kV Surge Arrestor drawing No. HSW/ST- 63R

132 kV Bus Post Insulator drawing No.HTD/ST144

132 kV Isolator/L&E drawing No. HTD/ST-90R

33 kV LA HTD/ST-89

33 kV NCT drawing HTD/ST-88R

Cable support structure (To be designed by the bidder for XLPE cables) for: i. 33kV Cable support structure for I/C of 100MVA 220/33kV T/F

ii.33kV Cable support structure for 4MVA 33/11kV T/F

11kV Cable support structure for 4MVA 33/11kV T/F along with provision of mounting of LA

PLCC equipment :-PLC terminals

PLC terminal with Prot. Coupler

Wave trap

Wave trap Note: 2 no. to be supplied by HVPNL)

LTU (P/P)

48V Battery & Battery Charger (300AH)

HF cable

33KV System The 36kV SF6 Gas Insulated Switchgear for three phase system shall have single bus bar arrangement with 13 bays (2 No. Transformer I/C bays from one no. 100MVA Transformer, 1 No. bus-sectionalizer bays, 7 nos. feeder bays, 1 No. T/F bays for Auxiliary T/Fs, 1 no. T/F bay for 4MVA 33/11kV T/Fs and 1 No. Capacitor bank bays). Space for 13 Nos. future bays (2 No. I/C of 220/33kV T/F bay, 8 No. line bays, 1 No. T/F bays for Auxiliary T/F and 1 No. capacitor bank, 1 No. bus-sectionalizer bay for future) shall be kept in GIS hall for adding future bays and jointing plugs required for connecting GIS of different makes. The SF6 Gas Insulated Switchgear rated for 33kV, 3-phase, 50Hz, 31.5kA for 3 sec. fault level shall be of the indoor metal-enclosed type, comprising of following items. 1. 36kV, 2000A, single 3 – f or three 1 –f, SF6 gas insulated, metal enclosed bus bars arrangement, consisting of 2000A single 3 – f or three 1 –f SF6 gas insulated switchgears, each Bus Bar comprising of :- (Single Bus with bus section-aliser) i) Bus bar enclosures running through the length of the switchgear to interconnect each of the circuit breaker bay modules in single bus system. ii) Each GIS compartment with gas monitoring device, pressure switch etc. as required. iii) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc. iv) Interconnecting wiring/ piping. v) Grounding, support structures and platforms.

2. 36kV, 2000A, single 3 –Phase or three 1 –Phase SF6 gas insulated, metal enclosed bus sectionaliser, consisting of 2000A single 3 –Phase or three 1-Phase SF6 gas insulated switchgears, each Bus Sectionaliser comprising of : i) 2000A, One 3 –Phase or three 1 – Phase SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for sectionaliser bay. ii) Three, single-core, single phase current transformers (2000-1000/5A) iii) Two sets of 2000A, one 3 –Phase or three 1 – Phase single pole, group operated isolator/disconnector with one, 3 –Phaseor three 1 – Phase single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms. iv) Two sets of Three, 2-core, single phase or single 3 – Phase 2 core voltage transformers/ PTs. v) Two sets of 2000A, One 3 –Phase or three 1 – Phase single pole, group operated isolator/disconnector with one, 3 –Phaseor three 1 – Phase single pole, group operated earthing switch with manual and motor driven operating mechanisms. vi) Each GIS compartment with gas monitoring device, pressure switch etc. as required. vii) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc. viii) Interconnecting wiring/ piping. ix) Grounding, support structures and platforms

3. 36kV, 2000A, single 3 – f or three 1 –f, Incomer transformer bay modules, consisting of 2000A single 3 – f or three 1 –f SF6 gas insulated switchgears, for 100MVA, 220/33kV transformers, each comprising of: - i) 2000A, One 3 – f or three 1 – f, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for incomer bay from 220/33kV transformer. ii) Three, 4-core, single phase current transformers (2000-1000/0.577-5-5-1A) iii) 2000A, one 3 – f or three 1 – f, single pole, group operated isolator/disconnector with one, 3 – f or three 1 – f, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms. iv) 2000A, One 3 – f or three 1 – f, single pole, group operated isolator/disconnector with one 3 – f or three 1 – f, single pole, group operated earthing switches complete with manual and motor driven operating mechanisms v) Each GIS compartment with gas monitoring device, pressure switch etc. as required. vi) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc.. vii) Interconnecting wiring/ piping. viii) Grounding, support structures and platforms. ix) Set of Surge Arrestors & Voltage Detectors

4. 36kV, 630A, single 3 – f or three 1 –f, Transmission line feeder circuit breaker bay modules, consisting of 630A single 3 – f or three 1 –f SF6 gas insulated switchgears, each comprising of:- i) 630A, One 3 – f or three 1 –f, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for outgoing feeder. ii) Three, 2-core, single phase current transformers (400-300/5-1A) iii) 630A, One 3 – f or three 1 – f, single pole, group operated isolator/disconnector with one, 3 – f or three 1 – f, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms. iv) 630A, One 3 – f or three 1 – f, single pole, group operated isolator/disconnector with one normal 3 – f or three 1 – f, single pole, group operated earthing switches, complete with manual and motor driven operating mechanisms v) Each GIS compartment with gas monitoring device, pressure switch etc. as required. vi) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc. vii) Interconnecting wiring/ piping. viii) Grounding, support structures and platforms. ix) Set of Surge Arrestors & Voltage Detectors

5. 36 kV, 630A, 31.5 kA for 3 sec, SF6 gas insulated Capacitor Bay Modules, consisting of 630A single 3 – f or three 1 –f, SF6 gas insulated switchgears, each comprising of:- i) 630A, One 3 – f or three 1 –f, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for outgoing feeder. ii) Three, 2-core, single phase current transformers (400-300/5-5A) iii) 630A, One 3 – f or three 1 – f, single pole, group operated isolator/disconnector with one, 3 – f or three 1 – f, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms. iv) 630A, One 3 – f or three 1 – f, single pole, group operated isolator/disconnector with one normal 3 – f or three 1 – f, single pole, group operated earthing switches, complete with manual and motor driven operating mechanisms. v) Each GIS compartment with gas monitoring device, pressure switch etc. as required. vi) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc. vii) Interconnecting wiring/ piping. viii) Grounding, support structures and platforms. ix) Set of Surge Arrestors & Voltage Detectors

7. 36 kV, 630A, 31.5 kA for 3 sec, SF6 gas insulated S/Stn Transformer Bay Modules, consisting of 630A single 3 – f or three 1 –f, SF6 gas insulated switchgears, each comprising of:- i) 630A, One 3 – f or three 1 –f, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for outgoing feeder. ii) Three, single phase 2-core current transformers (60-30/5-1A) iii) 630A, One 3 – f or three 1 – f, single pole, group operated isolator/disconnector with one, 3 – f or three 1 – f, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms. iv) 630A, One 3 – f or three 1 – f, single pole, group operated isolator/disconnector with one 3 – f or three 1 – f, single pole, group operated earthing switches complete with manual and motor driven operating mechanisms v) Each GIS compartment with gas monitoring device, pressure switch etc. as required. vi) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc. vii) Interconnecting wiring/ piping. viii) Grounding, support structures and platforms. ix) Set of Surge Arrestors & Voltage Detectors

8a) 33kV XLPE copper Cable 6X1C (1000mm2) for connecting 33kV side of each I/C of 220/33kV transformer with GIS with termination kit for both end for all Twelve cables. (two cables shall be used in each phase for each I/C, i.e. 2 Runs per phase x 3 no. Phase x 2no. I/C)

8 b) Single phase Termination kit for both end for 33kV XLPE copper Cable (1cx1000mm2)

9a) 33kV XLPE copper Cable (3cx300mm2) for connecting 33kV capacitor bank bay (approx. qty)

9b) Three phase Termination kit for both end for 33kV XLPE copper Cable (3cx300mm2)

10a) 33kV XLPE copper Cable (3cx95mm2) for single ckt. for station transformer (approx. qty)

10b) Three Phase Termination kit for both end for 33kV XLPE copper Cable (3cx95mm2)

11a) 33kV XLPE copper Cable (3cx95mm2) for connecting 4MVA 33/11kV T/F (approx. qty)

11b) Three phase Termination kit for both end for 33kV XLPE copper Cable (3cx95mm2)

Equipments for maintenance: i) Portable circuit breaker operation analyzer.

ii) Digital Micro-Ohm meter for contact resistance measurement Ranges (0-100 ohm) (0-1 milliohm) (0-10 milliohm).

iii) Dew Point meter

iv) Portable partial discharge monitoring system for GIS.

v) Digital Earth resistance meter.

vi) 5 kV Automated insulation resistance tester.

vii) Earth stick with lead suitable for use in 220/33kV Switchyard

viii) SF-6 Gas filling and evacuating plant

ix) SF-6 Gas leak detector (Portable)

x) Tools for gas handling

xi) LT DC Leakage detector from control cabinets and LT cables

Common Spares, Maintenance and Testing Tools (33 KV) i) SF6 Gas pressure relief devices

ii) Pressure gauges (of each type) along with coupling device

iii) Rubber Gaskets, “ o” Rings and seals for SF6 Gas (Set each type)

iv) Molecular filter for SF6 Gas with filter bags (1 Set 20%of total weight)

v) Density Monitors for SF6 Gas (No. each type)

vi) All types of Control Valves for SF6 Gas 1 Set each type

vii) SF6 Gas of total gas requirement 1 Set i.e. 20% of Total weight

viii) Enclosures, Insulators & main circuit to replace on each phase, any compartment of Busbar or bay (one Set each type)

ix) Covers with all accessories necessary to close a compartment in case of dismantling of any part of the enclosure to ensure the sealing of this compartment (as applicable) a) For 3 Phase Enclosure

b) For Single phase enclosure

x) Locking device to keep the Disconnectors (Isolators) and Earthing switches in close or open position in case of removal of the driving Mechanism

xi) Bus Support insulator of each type for 3 phase/single phase enclosure 1 set i.e 5% of total population

xii) Pipe length (Copper or Steel as applicable) for SF6 Circuit of each type

xiii) SF6 to air bushing (33 KV of each type & rating) 1 No each

CIRCUIT BREAKERS (33 KV) i) Complete Circuit Breaker pole of each type & rating complete with interrupter, main circuit, enclosure and Marshalling Box with operating mechanism

ii) Fixed, moving and arcing contacts including insulating nozzles, (3 Nos. of each type)

iii) Rubber gaskets, `O' rings and seals for SF6 gas of each type

iv) Trip coil assembly with resistor as applicable, 3 Nos. of each type

v) Closing coil assembly with resistor as applicable, 3 Nos. of each type

vi) Molecular filter for SF6 gas with filter bags 1set i.e 10% of Total quantity used

vii) SF6 Pressure gauge cum switch OR Density monitors and pressure switch as applicable, 3 Nos. of each type

viii) Coupling device for pressure gauge cum switch/ for connecting Gas handling plant, 3 Nos. of each type

ix) Relays, Power contactors, push buttons, timers & MCBs etc of each type & rating

x) Closing assembly/ valve, 3 Nos. of each type Set

xi) Trip assembly/ valve, 3 Nos. of each type

xii) Auxiliary switch assembly, 3 Nos. of each type

xiii) Spring operated closing mechanism, 1 No. of each type, if applicable

xiv) Terminal Pad & connectors

Isolators , E/Switch & High Speed E/Switch (33 KV) i) Complete set of 3 nos. of single phase / one no. of 3-phase dis-connector including main circuit, enclosure, driving mechanism.

ii) 3 nos. of single phase / one no. of 3-phase Earthing switch including main circuit, enclosure, driving mechanism.

iii) Copper contact fingers for dis-connector male & female contact – for one complete (3 phase) dis-connector of each type and rating.

iv) Copper contact fingers for earthing switch male & female contacts, for one complete (3 phase) earthing switch of each type and rating

v) Open / Close contactor assembly, timers, key interlock for one complete (3 phase) dis-connector and (3 phase) earthing switch of each type and rating

vi) Push button switch.-each type, as applicable

vii) Limit switch and Aux. Switches for complete 3 phase equipment a) For isolator

b) For earth switch

viii) Rotor housing bearing assembly for complete 3 phase equipmenta) a) For isolator

b) For earth switch

ix) Motor with gear assembly for complete 3 phase equipment a) For isolator

b) For earth switch

x) Corona shield rings as applicable

xi) Hinge pins for complete 3 phase equipment a) For isolator

b) For earth switch

xii) Bearings for complete 3 phase equipment a) For isolator

b) For earth switch

xiii) Interlocking coil with resistors, timers, key interlock for complete 3 phase

xiv) Relays, Power contactors, resistors, fuses, push buttons & MCBs a) For isolator

b) For earth switch

xv) Terminal pad and connectors (complete for one 3 phase equipment) a) For isolator

b) For earth switch

xvi) Aux. switch assembly (complete) with 10 NO & 10 NC OR more contacts

xvii) 36 kV, 2500 A, 3 – f or 1 –f high speed fault making grounding switch, Internal parts complete with all necessary gaskets mounting hardware etc.

xviii) 36 kV, 2500 A, 3 – f or 1 –f high speed fault making grounding switch operating mechanism complete with all necessary gaskets connecting apparatus.

Current Transformer (33kV) i) 33kV 1 ph CT ratio 2000-1000-/0.577-5-5-1A complete with all gaskets and mounting hardware

ii) 33kV 1 ph CT ratio 400-300-/5-1A (line CT) complete with all gaskets and mounting hardware

Voltage Transformer/PT(33kV) i) 33kV, 1-phase VT as per technical specifications complete with all gaskets and mounting hardware.

Civil work :- 1) EARTH WORK IN FILLING/ CUTTING Earth filling with good earth (as per satisfaction of Executive Engineer/Civil Works Division), laying in layers (as per specification), dressing, including carriage, irrespective of lead, loading, unloading, watering and compaction in layers with roller including compensation of earth complete in all respect.

2) FOUNDATIONS Supply of labour, T&P, material and construction of RCC footings & pedestals etc. for steel gantry and equipment structures complete in all respects as per technical specifications & drawings attached with the tender document including cost of excavation, concreting, cement, reinforcement steel, form work, grouting, holding down bolts, backfilling etc. and other items not mentioned herein but required for the completion of work. a) For Filling upto 2.5m Filling A) GANTRY TOWERS i) AT-1

iii) AT-4

vii) BT-4

viii) BT-6

B. EQUIPMENT 220kV side i) 220kV LA

ii) 220kV Isolator/L&E switch

iii) 220kV CVT

iv) 220kV PT

v) 220kV CT

vi) 220kV Post Insulator

vii) 220kV NCT

132 kV side i) 132kV LA

ii) 132kV Isolator/L&E switch

iii) 132 kV CVT

iv) 132kV CT

v) 132kV Post insulator

33KV Side i) 33 kV NCT

ii) 33 kV LA

(b) For Filling above 2.5m Design Engineering, supply of labour, material and construction of cable support structure foundations including all associated works, RCC, PCC, reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specification. A) GANTRY TOWERS i) AT-3

iii) AT-6

B EQUIPMENT i) 220kV Isolator/L&E switch

ii) 220kV LA

iii) 220kV CT

iv)220kV Post Insulator

3) BREAKER FOUNDATION Design, Engineering, Supply of labour, material and Construction of breaker foundations including all associated works, RCC, PCC, Reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specifications. i) 220kV SF-6 Breaker

ii. 132kV SF-6 Breaker

4) CABLE SUPPORT STRUCTURE Design, Engineering, supply of labour, material and construction of cable support structure foundations including all associated works, RCC, PCC, reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specification. i) 33kV Cable Support Structure

ii) 11kV Cable Support Structure

5) RCC ANTIFIRE WALL Construction of RCC anti fire wall of suitable height between 220/33kV, 100MVA T/Fs and 220/132kV, 160MVA as per HVPNL drawing and all associated works including supply of labour, material, cement, reinforcement steel, steel form work etc. as per technical specification.

6) ROADS:- Supply of labour, material and construction of cement concrete roads and walkways/shoulders from NH/SH/etc. to Switch yard/Switch house building as per GELO/CLO as per sectional detail drawing no. HCD/SK-181 R1 and technical specification. I) 6.0m wide road at main entry gate of substation land until 5.0m or as per site conditions inside main entrance gate(s) leading to switch house building and switchyard.

ii) 5.0m wide including approach road from HSIIDC-nonand village road to substation land

iii) 3.66m wide

7) CAPACITOR BANK FOUNDATIONS:- Design, Engg. & supply of labour, material & construction of foundations for following rating capacitor bank with capacitor unit (with allied equipments) & series Reactor etc. including chain link fencing 1.8M height around cap. bank complete in all respect including any other items not specifically mentioned herein but required for completion of job as per technical specification i) 1x21.744MVAR 33kV Cap. Bank

8) ROAD CULVERT Design, Engineering and const. of Pipe culvert(s) at suitable locations under the approach road (from main PWD/ HUDA/Municipal/Village road to the sub-station entry point) including, cost of labour, material complete in all respects as per I.R.C. Standards

9) TRANSFORMER FOUNDATION Design, Engg., supply of labour, material and construction of T/F foundation including radiator foundations etc. complete transformer foundations including all associated works, RCC, PCC, Reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specifications and HVPNL drawing. In case additional foundation is/are required as per approved equipment drawing, the same shall be constructed by the successful bidder without any extra cost to HVPNL. Such drawing(s) shall, however, be got approved from HVPNL. i. 160MVA,220/132kV T/F foundation

ii. 100MVA, 220/33kV T/F foundation

iii. 4MVA 33/11kV

iv. 200KVA 33/0.4kv Station T/F

v. 100kVA DG Set

10) OUTDOOR CABLE TRENCHES Supply of labour, material such as cement, reinforcement steel, GI angles, flats, PCC & brick pillars below cable trenches for construction of Out-Door Cable Trenches (ODCT) of required depth/ type with pre-cast RCC covers including associated works like Cable Trench Culverts crossings for roads and sumpit-cum-pump chamber with 2HP motor of reputed make, starter, volt meter, amp-meter etc. as per approved Trench layout plan, HVPNL drgs. & tech. specs. complete in all respect.

11) SITE SURFACING 11.1) Providing, supplying & laying 100mm thick in two layers of 50mm each of 20mm nominal size uncrushed/crushed/ broken stone pebbles gravel fill including dressing, rolling & compacting complete in all respects as per specs. & instructions of XEN/Civil Works Division.

11.2) Providing, supplying & laying 100mm thick PCC (1:4:8) using 20mm nominal coarse aggregates and spreading 100mm thick layer of 40mm nominal size uncrushed/ crushed/broken stone pebbles over the PCC including construction of toe wall (exposed wall plastered with cement mortar 1:5) to hold 40mm single size uncrushed/ crushed /broken stone pebbles wherever required in the bays covered under the present scope as detailed in the GELO & instructions of concerned XEN/Civil Works Division.

12) BOUNDARY WALL 12.1) Supply of labour, T&P, material & construction of front, side & U/C boundary walls (brickwork below DPC level) as per GELO/CLO, tech. spec. & HVPNL drgs including excavation, PCC, back filling etc. complete in all respects.

12.2 ) Supply of labour, material and construction of front, C & U/C boundary walls above DPC including main gate foundations as per GELO/CLO, technical specifications. & HVPNL drg. HCD/TS-1176 R3 including DPC complete in all respect. i) 6 ft. high U/C B/wall with barbed wire on angles at top including construction of entrance gate(w/o wicket gate) for yard.

ii) 4½ ft. high front wall including providing grill at top of wall & construction of main entrance gate (with wicket gate).

iii) 4½ ft. high side wall with barbed wire on angles at top of wall.

13) RCC retaining wall Supply of labour, material and construction of RCC retaining wall to retain the earth filling where the difference falling between NGL & FGL from 3.5 to 4.0 mtr. as per HVPNL drg. no.(HCD/SK-202) complete in all respect.

14) CONTROL ROOM Supply of labour, material & construction of control room building complete in all respect as per tech. specs. & approved drgs. attached including exterior & interior acrylic emulsion paint, all internal services like water supply including supply & providing of 5000ltr. capacity triple layered Sintex/Diplast PVC tank, sewerage system, staircase, electrification including wiring, modular switches, maximum 20W 4ft. long LED tubes with fittings minimum 1960 lumens, ceiling/exhaust fans , finishing, plinth protection, indoor trenches, trench covers, soakage pit near the switch house building, connection of sewerage system to Soakage pit/Sewerage system of local authorities (as applicable), connection to main water supply system of local authority/ submersible bore (as applicable) etc. & any other item not mentioned herein but required for completion of works. The successful bidder shall also provide water supply connection from bore well/HUDA/Municipal /Public Health or Panchyat water supply scheme (as per available source of portable water) to the control room bldgs. without any extra cost of HVPNL.

15) GIS HALL/BUILDNG Design, Engineering including architectural, supply of labour, material and construction of GIS building with ventilation system including crane hoisting system (EOT), equipment foundations as detailed in the bill of quantities under Annexure-1 of Section-I of bid/contract documents, electrification including wiring, receptacle, modular switches, 20W LED4F WH LED tubes(equivalent to 28W CFL tubes), bulkhead LED lights including fixtures, ceiling/exhaust fans, stair case etc. interior & exterior acrylic emulsion, paint, RCC paving/plinth protection starting from the building up to 2m clear distance for the full length width of the building etc. complete in all respect for below mentioned GIS hall/building and any other item not mentioned herein but required for completion of job as per specifications. i) 33kV GIS hall

16) U/C FENCING & GATES Providing & fixing chain link fencing including foundations, GI angle iron posts and gate(s) complete as per electrical layout & tech. spec. & as per drawing attached.

17) PCC PAVEMENT Construction of PCC pavement in front, rear or side (as per site requirement of the switch house building) as per drawing no. HCD/SK-172 & technical specifications.

18) DRAINAGE-CUM-RAIN HARVESTING SYSTEM The successful bidder shall evolve design & drawing for drains, manholes with RCC covers and settlement tank including preparation of drainage layout drawing for disposal of rain water from building’s roof top & switch yard (s/stn.) area into respective bore well(s) in such a way that there shall be no ponding of water on the roof and switch yard (s/stn.). The layout so developed shall be got approved from the employer. The location of sump-pit-cum-pump chamber shall preferably be located on corner(s) of the s/stn. and shall be got decided from the concerned XEN/Civil Works Division on the basis of surroundings of the substation(s). The successful bidder will also supply labour and material for construction of sump-pit-cum-pump chamber as per HVPNL drgs. & provide two no. non clog pump(s) of 5HP of reputed make capacity with main switch, starter, volt meter, Amp. Mtr. etc. (for each sump pit) for disposal of excess water to outfall point. Any other item(s) not mentioned herein but is/are required for completion of works shall be done by the successful bidder without any extra cost to the employer.

19) RCC M-25/M-20 inclusive of labour, material, shuttering, Steel reinforcement etc. complete in all respects to compensate excess quantity required to be executed due to difference in existing ground level and the formation level to be fixed after contouring or difference on account of revised drawing issued at the time of construction and the tender drawing.

SMS India Private Limited

ETHOS POWER PRIVATE LIMITED

Blue Star Limited