SPL REPAIR OF BOUNDARY WALL AT MALL ROAD ENCLAVE, PROVN OF VIEW CUTTER AT MALL ROAD ENCLAVE AND PROVN OF 01 X TOILET BLOCK AT PVTC (OLD DIV ORD UNIT LOC) UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Dismantling of pre-cast cement concrete louvres and jallies complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filing in including spreading, levelling watering & well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance not exc. 50m & depositing where directed at a level n exc 1.50m aboove starting point complete all as specified and directed.

M&L providing Cement concrete type D-2 1:4:8 (using 40 mm well graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L reinforced Cement Concrete (design mix) M-25 (using 20mm well graded crushed stone aggregate) as in foundation including raft footing, foundation beams, plinth beams, bases for columns etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L reinforced Cement Concrete (design mix) M-25 (using 20mm well graded crushed stone aggregate) as in Columns, Pillars, piers, posts and struts complete all as specified and directed.

M&L reinforced Cement Concrete (design mix) M-25 (using 20mm well graded crushed stone aggregate) as in beams contilevers bressumers,lintels over 1.50m span complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides & soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, including rough finished surfaces of concrete complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing form work rough finished surfaces to edges of concrete flats, brick in floor cills, railing etc & similar works exc 10 cm but n.exc 20cm wide complete all as specified and directed.

M&L form work to sides of pillars, struts, piers, columns and stanchions including rough finished surfaces of concrete, square, rectangular or polygonal in sections concrete complete all as specified and directed.

M&L TMT bar 10 mm and over cut to length, bend to shape required including cranking, bending spirally for hoopings for cols, hooking ends and binding with ad including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per Srl item No 17 here-in-before but 5mm dia over and upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement complete all as specified and directed.

M&L for treatment on new plasterd surface of wall on external surfaces and applying a coat of primer (water based primer) and allow to dry for six hours. Thereafter apply two coats of exterior grade weather proof acrylic emulsion paint. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The acrylic paint shall be applied by mechanically airless paint sprayer machine only and throgh applicator.) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement laid over and including 10mm thick rendering in cement mortar 1:4 on fair face of brick or concrete surface complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified & directed and as per manufacturer's instructions

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed.

S&F concertina razor wire coil for fencing of overall dia 1050mm, thickness 0.5mm, dia 2.5mm, barb length10mm, barb width 13mm, barb spacing 26mm & 05 no. of loops per meter length including all necessary fixing with accessories complete all as specified and directed.

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Material & labour for hardcore of broken bricks gauges not exceeding 63mm, deposited spread and leveled in layers not exceeding. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Material & labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 with mixing of water proofing compound (WPC) @3% of wieght of cement consumed or as per manufacters instruction surface finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC consumed in this item shall be measured & paid separetely under "supply only" item.

Material & labour for 5 mm thick rendering in cement mortar 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing 75 mm thick plain cement concrete 1:3:6 type C-2 using (using 40 mm well graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L Non Skid ceramic tiles 10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement joint free non skid tiles.laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

M&L for glazed coloured ceramic tiles of size 450x300x7mm to 8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement match with existing work laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L providing 75mm thick plain cement concrete (PCC) 1:3:6 type C-1 (using 20mm well graded crushed stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of exterior acryicl emulsion paint (weather proof painting) over & including of 2mm thick wall putty complete all as specified & directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over & including 2mm wall putty complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying two coat of oil bound distemper complete all as specified & directed.

M&L Rendering 20 mm thick rendering /screed bedding on fair faces of concrete surfaces, finished even and smooth on roof in cement mortar (1:4) complete all as specified and directed.

Material & labour for cleaning of concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed

S&F 1mm thick mild steel plain, black sheet in wall cladding, steel gates and similer work, cut to size, holes, punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing witn plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed

S&F 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and directed.

S&F PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F steel C.P. grating 100/125 mm dia as required at site complete all as specified and directed.

S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete 1:2:4 type-B-1 complete all as specified & directed.

S&F PVC bends 110mm bore, any radius complete all as specified & directed.

S&F steel windows or ventilators, fixed type, with glazing bar and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work complete all as specified and directed.

S&F Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 20 mm pipe complete all as specified and directed.

S&F bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia complete all as specified & directed.

S&F angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks 1000 liters capacity, three layered, IS : 12701-1996 marked (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings complete all as specified and directed.

S&F in PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

S&F in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe with 'S' Trap complete all as specified and directed.

S&F vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with, integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

S&F in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed.

M&L for 20 mm thick machine cut Granite stone slab PERFECT BLACK table rubbed polished and round edges as in cooking plateform, jamb, pilller plateform, steps and window cills and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigmen to match with shade of graniteomplete all as specified and directed.

Supplied and fixed GI steel water tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including cutting screwing and waste etc and cutting through walls floors etc complete all as specified and directed.

Supplied and fixed GI steel water tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including cutting screwing and waste etc and cutting through walls floors etc complete all as specified and directed.

S&F 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

S&F butt hinges, 100 mm long of stainless steel, complete all as specified & directed.

S&F PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

S&F pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed.

M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2 complete all as specified and directed.

M&L Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed.

M&L Soakage wells excavation, in ordinary soil, foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 concrete, including screen chamber brick work in CM, RCC cover slab in M-25/RR masonry / filling with brick bats complete of size 1.20M dia x 3.00M deep complete all as specified in drg No TD-309 sheet No 1/4 to 4/4 and as directed.

M&L for Septic tanks, exc in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fire reinforced cover with angle iron frame Vent shaft and sludge chamber etc. complete for 10 users omplete all as specified in drg No TD-217 sheet No 1/7 to 7/7 and as directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed. (a) One light point controlled by one way switch 05/06 Amps

All as per item No 81.00 above, but One exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 81.00 above, but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

Supply and fix switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fix socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

S&Fing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed.

Supply and fix LED lamp 9/10 watt complete all as specified and directed. make:- Havells/ Crompton/Surya

Supply and fix LED Batten 20 Watt aluminium housing integtrated type complete with all accessories and fixing material all as specified and directed. Make:- Havells/ Crompton/ Surya

Supplying and fixing LED tube light fitting 9/10 watt surface mounted,with extruded polycarbonate , integrated lamp & driver , with opal diffuser and decorative end plates.complete with acessories all as specified and directed. Make Havells/CROMPTON/ Surya

Supplying and fixing LED bulk head light fitting wall mounted with back lit LED 10 watt, IP-66,complete with all acessories all as specified and directed. Make- Havells / Crompton/ Surya.

Supply and fix exhaust fan 300 mm , single phase , 50 HZ with double ball bearing heavy duty all with all including all fixing material all as per directed.

S&Fing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S&Fing MCB, DP (Double Pole), AC, 240 volts, B series capacity32 Amps to 40 Amps 10kA and making connections complete all as specified & directed.

Supply, laying commissioning and testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches fixing on wall, under road crossing through protection pipe etc complete all as specified and directed

Supply, laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

AR Enterprises

vibha associates

Shikha Enterprises

M/S AMAR ELEKTRO CENTRE

mohanlal gupta

SA construction co.

chaprana enterprises