GE(U)/CHM-15/20202-21 - REPAIRS TO WATER SUPPLY ASSETS SUCH AS PUMPS, REWINDING OF MOTORS, CONTROL PANELS, RENEWAL OF EARTHINGS ETC AND PERIODICAL MAINT OF ASSETS IN THE ENTIRE WATER SUPPLY INSTALLATIONS UNDER AGE E/M-II, GE (U) CHANDIMANDIR

Amount

Taking down carefully centrifugal pump set 200 HP by isconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after). Make of Pumps: Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS) suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers complete all as specified and directed.

Supply only water seal suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only motor pump MS coupling of suitable size, pin and bush type complete with bush nut, bolts etc suitable for 200 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: B-FLEX RB Lovejoy or equivalent

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned Sr No 1.01 to 1.10 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No.1

Taking down carefully centrifugal pump set 100/120 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush/latern ring suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 100/120 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Lovejoy/ Unimac

Supply only bronze impeller suitable for 100/120 HP pump all as per manufacturer's design as per staging and eye of the impeller complete all as per specified and directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned Srl 2.01 to 2.11 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 2

Taking down carefully centrifugal pump set 75 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only motor pump MS coupling of suitable size, pin and bush type complete with bush nut, bolts etc suitable for 75 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 75 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Unique/ Unimac

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only bronze impeller suitable for 75 HP pump all as per manufacturer's design as per staging and eye of the impeller complete all as per specified and directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 3.01 to 3.12 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 3

Taking down carefully centrifugal pump set 60 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 60 HP motor pump as per manufacturer's design complete.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 60 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Unique/ Unimac

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed. Make : NBC/ TATA/ SKF Note: All the items/parts mentioned srl 4.01 to 4.10 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 4

Taking down carefully centrifugal pump set 50 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 5.01 to 5.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 5

Taking down carefully centrifugal pump set 30 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 6.01 to 6.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 6

Taking down carefully centrifugal pump set 20 to 25 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 7.01 to 7.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 7

Taking down carefully centrifugal pump set 10 to 15 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 8.01 to 8.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 8

Dismantling and taking up submersible motor pumpset 7.5 HP, 3 phase with connected pipes of size 80/100 mm from the tube well after dis-connecting the electric connections, shifting the same to the workshop for repair involving replacement of wornout parts, bringing back to the site after repair and lowering the motor pump set including replacement of rubber washers, nuts, bolts, washers and re-fixing electrical connections as required at site (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) and testing on load, complete all as specified and as directed. Make : Kirloskar, CG or any make as per site.

Supply only SS impeller suitable for 7.5 HP submersible pump set seven stage as per manufacturer's design complete all as specified and as directed.

Supply only shaft sleeve suitable for 7.5 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Supply only neck ring suitable for 7.5 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing required as per site condition complete all as specified and as directed.

M & L for opening of submersible motor capacity 7.5 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding of the same with PVC insulated copper cable of appropriate size matching with manufactures design, including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed. Note: All the items/parts mentioned against item 9.01 to 9.05 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against item 9. Cost of fixing of item 9.01 to 9.04 shall deemed to be included in the unit rate of item 9 here-in before.

Dismantling and taking up submersible motor pumpset 15 HP, 3 phase with connected pipes of size 80/100 mm from the tube well after dis-connecting the electric connections, shifting the same to the workshop for repair involving replacement of wornout parts, bringing back to the site after repair and lowering the motor pump set including replacement of rubber washers, nuts, bolts, washers and re-fixing electrical connections as required at site (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) and testing on load, complete all as specified and as directed. Make : Kirloskar, CG or any make as per site.

Supply only SS impeller suitable for 15 HP submersible pump set seven stage as per manufacturer's design complete all as specified and as directed.

Supply only shaft sleeve suitable for 15 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Supply only neck ring suitable for 15 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing required as per site condition complete all as specified and as directed.

M & L for opening of submersible motor capacity 15 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding of the same with PVC insulated copper cable of appropriate size matching with manufactures design, including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed. Note: All the items/parts mentioned against item 10.01 to 10.05 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against item 10. Cost of fixing of item 10.01 to 10.04 shall deemed to be included in the unit rate of item 10 here-in before.

Taking down carefully vertical turbine pump set 50/60 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only impeller ring as per manufacturer's design complete all as specified and directed

Supply only stuffing box packing and greasing suitable for50/60 HP VT pump as per manufacturer's design complete all as specified and as directed.

Supply only impeller latern ring as per manufacturer's design complete all as specified and as directed.

Supply only gun metal shaft sleeve as per manufacturer's design complete all as specified and as directed.

Supply only coupling as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing required as per site condition complete all as specified and as directed.

Supply only turbine bowl and bell suction as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 50/60 HP VT pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 11.01 to11.08 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 11

M&L for servicing of hand operated crane of capacity upto 5 tonne including cleaning with wire brush, greasing of hoist, painting with approved color, replacement of hook, cleaning and greasing of rail slots, replacement of bridge drive and idler wheels, repair of pulley chain, painting of all iron parts with approved color, complete including load testing all as specified and directed

M&L for taking down defective electric motor, squirrel cage type of any make, from base plate after unscrewing nuts, bolts of foundation/ coupling, 3 phase, 415/440 volts, 50 Hz, AC of capacity 200 HP(approx weight 900 Kgs) shifting the same to workshop, strip opening after un-screwing nuts, bolts/ screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enameled copper winding wire of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, leathered paper, PVC insulated copper conductor wire connection leads of appropriate size with sleeves of suitable size upto terminal connection box, varnishing, drying up, re-assembling, refxing and re-installation at site complete and testing on load complete all as specified and as directed by Engineer-in-Charge. Note: (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall deemed to inculde the same. (ii) Repair shall be done from any workshop within a radius of 20 Km from GE (U) Chandimandir. (iv) After assembling, rewinded motor shall be checked for no load current and full load current. Make : Kirloskar, CG or any make as per site.

Description all as per item No 13 here-in-before but 100/120 HP motor (approx weight 650 Kg).

Description all as per item No 13 here-in-before but 75 HP motor (approx weight 550 Kg).

Description all as per item No 13 here-in-before but 60 HP motor (approx weight 425 Kg).

Description all as per item No 13 here-in-before but 50 HP motor (approx weight 350 Kg)

Description all as per item No 13 here-in-before but 30 HP motor (approx weight 250 Kg)

Description all as per item No 13 here-in-before but 20 to 25 HP motor (approx weight 185 Kg)

Description all as per item No 13 here-in-before but 10 to 15 HP motor (approx weight 125 Kg)

Description all as per item No 13 here-in-before but 7.5 HP motor (approx weight 90 Kg)

Description all as per item No 13 here-in-before but 5 HP motor (approx weight 40 Kg)

Supply and fixing in repair ball bearing DE/NDE suitable for AC electric motor, 3 phase, 415/440 volts of rating 200 HP capacity complete all as specified and as directed. Make : SKF/TATA/NBC.

Description all as per item No 23 here-in-before but of rating 100/120 HP motor.

Description all as per item No 23 here-in-before but of rating 75 HP motor.

Description all as per item No 23 here-in-before but of rating 60 HP motor.

Description all as per item No 23 here-in-before but of rating 50 HP motor.

Description all as per item No 23 here-in-before but of rating 30 HP motor.

Description all as per item No 23 here-in-before but of rating 25 HP motor.

Description all as per item No 23 here-in-before but of rating 20 HP motor.

Description all as per item No 23 here-in-before but of rating 15 HP motor.

Description all as per item No 23 here-in-before but of rating 10 HP motor.

Description all as per item No 23 here-in-before but of rating 7.5 HP motor.

Description all as per item No 23 here-in-before but of rating 5 HP motor.

Taking out open well type 7.5 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

M&L for Strip opening of open well type submersible motor of capacity 7.5 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Taking out open well type 5 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

M&L for Strip opening of open well type submersible motor of capacity 5 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Taking out open well type 2 to 3 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

M&L for Strip opening of open well type submersible motor of capacity 2 to 3 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Taking out open well type 0.5 to 1 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

M&L for Strip opening of open well type submersible motor of capacity 0.5 to 1 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

S & F in replacement, multi stranded, 4 Sqmm, 3 core, PVC insulated and sheathed flat cables, 1100 volts, with copper conductor, ISI marked, IS- 694 complete all as specified and as directed. Make: BCH/ Finolex/ Havells/ Plaza

All as per item no. 43.0 above but of size 6 Sqmm, 3 core

S & F in replacement, multi stranded, 10 Sqmm, 3 core, PVC insulated and sheathed, unarmored copper conductor cables, 1100 volts, with copper conductor, ISI marked, IS- 1554/IS-694 complete all as specified and as directed. Make: BCH/ Finolex/ Havells/ Plaza

All as per item no. 45.0 above but of size 16 Sqmm, 3 core

All as per item no. 45.0 above but of size 25 Sqmm, 3 core

All as per item no. 45.0 above but of size 35 Sqmm, 3 core

All as per item no. 45.0 above but of size 50 Sqmm, 3 core

All as per item no. 45.0 above but of size 95 Sqmm, 3 core

Supply & fixing in replacement motor pump set 'L' type spider coupling set, size L-150 complete made out of cast iron including drilling holes and suitable size of nuts & bolts complete all as specified and directed. Make: Flex-C/Lovejoy/HIC/Fenner

All as per item no. 51.0 above but of size L-190

All as per item no. 51.0 above but of size L-225

All as per item no. 51.0 above but of size L-276

All as per item no. 51.0 above but of size L-295

M&L for periodical Servicing of motor pumps of capacity 10 to 15 HP which includes strip opening of end plates, cleaning of bearing housings with k-oil, refilling with superior quality grease, realignment of motor pump with water level complete all as specified and as directed. Note: (i) Servicing shall be done as per set periodicity of one month (for servicing the motor pump, contractor shall submit proper documentation maintain record, hours run etc in support) monthly schedule of which shall be communicated to the contractor by the Engineer-in-Charge. (ii) Record of servicing shall be entered in a log book and shall be signed by the Engineer-in-Charge. (iii) Penal charges shall be recovered as per Sch A/BOQ notes for non compliance. (iv) Each service per motor punp to be measured and paid as one unit.

All as per item no: 56 above but for motor pumps of capacity 20 to 30 HP

All as per item no: 56 above but for motor pumps of capacity 50 to 60 HP

All as per item no: 56 above but for motor pumps of capacity 75 HP

All as per item no: 56 above but for motor pumps of capacity 100 to 120 HP

All as per item no: 56 above but for motor pumps of capacity 200 HP

Taking down carefully existing motor and pump set of capacity 10 to 20 HP from MS common base frame for replacement of deteriorated base frame and repair of PCC foundation including re-mounting of motor pump set to match with alignment of existing pipe line complete all as specified and directed by Engineer-in-Charge. Note : PCC foundation & MS common base frame shall be measured & paid seperately under respective item of BOQ.

All as per item no: 62 above but for motor pumps of capacity 30 HP

All as per item no: 62 above but for motor pumps of capacity 50 to 75 HP

All as per item no: 62 above but for motor pumps of capacity 100 to 120 HP

Demolition and removing from site old PCC and M & L for Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (mass concrete) for pump set bed including necessary form work complete all as specified and directed.

S & F in replacement rolled mild steel channel, angle or tee sections, fixed independently, without connection plate, etc Fe-290 (Gde E-165) including nuts, bolts and washers for base frame of motor pump set, drilling of holes of suitable size for bolts & painting with 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

M&L earthing complete with galvanized steel plate electrode 60cmx60cmx6mm surrounded by charcoal & salt buried directly in a pit of depth not less than 1.5m below ground level with top edge of the earth plate at a depth of not less than 1.50m below ground level, connected to and including GI strip 25mmx4mm upto 7.5m length by means of bolts, nuts, check nuts & washers of galvanized iron, earth strip protected by galvanized steel pipe 40 mm bore (light grade) & connected to main control board including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore GI pipe (medium grade) for watering, funnel, wiremesh, PCC chamber in cement concrete (1:3:6) type C-1, 40mm thick RCC(1:2:4) type B-1 cover & frame etc) complete all as indicated in electric plate No 3 of SSR 2009 Part I including testing complete all as specified and as directed. Note : (i) Earthing result/data sheet will be prepared by the Contractor and submitted to Engineer-in-Charge. Earth resistance shall be to the entire satisfaction of Engineer-in-Charge and contractor will make all arrangements & provisions to get the desired reduction of resistance by artificial treatment/replacement of soil etc at no extra cost to department. (ii) GI protection pipe for earth lead shall be measured & paid for separately .

Supply and fixing in replacement aluminium strip as in earth connection of plants /assets of size 25 mm x 4 mm complete all as specified and directed.

Supply and fixing in replacement GI strip as in earth connection of plants /assets of size 32 mm x 6 mm complete all as specified and directed.

Supply & fix in repair direct online starter suitable for 5 HP capacity motor in sheet steel enclosure complete all as specified and directed. Make: Siemens Model: 3TW4290-1A.74 / ABB Model: 1SYN140318R8650/ BCH Model: NAJLEN

Supply & fix in repair direct online starter suitable for 7.5 HP capacity motor in sheet steel enclosure complete all as specified and directed. Make: Siemens Model: 3TW4290-1A.77/ ABB Model: 1SYN16018R86750/ BCH Model: NAKLEN

Supply & fix in repair direct online starter suitable for 10 HP capacity motor in sheet steel enclosure complete all as specified and directed. Make: Siemens Model: 3TW4290-1A.78 / ABB Model: 1SYN180318R8610 / BCH Model: NALLEN

Supply and laying in road/ floor, fixed to walls/ pole and ceiling, trenches , 40mm bore galvanised steel tubing light grade, ISI marked, including fittings for earthing complete all as specified and as directed.

Note: 1 For Makes of all items refer Appx 'A' and 'B' of tender documents. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit Revised in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/S Trilok chand sharma

Bharat Enterprises

R D Bansal