Conversion of existing Overhead electrical distribution system to Underground Cable system in Ullala City Muncipal Council areas of Ullala Sub-division of Mangaluru Division (Part-1) on Total turnkey basis

Conversion of existing Overhead electrical distribution system to UG system in Ullala City Muncipal Council areas (Part-1) - HT Line (Supply Portion)

11kV 3 Core HT XLPE GI Round wire armoured UG Cable as per technical specifications - 240 Sq. mm (55 GI Wires - 3.15mm Dia)

11kV 3 Core HT XLPE GI Round wire armoured UG Cable as per technical specifications - 95 Sq. mm (54 GI Wires - 2.5mm Dia)

Straight Through Jointing Kits HS Type suitable for 3x240 Sq. mm Cable

Cable Termination Kit Outdoor HS Type Suitable for 3x240 Sq. mm Cable

Cable Termination Kit Indoor HS Type Suitable for 3x240 Sq. mm Cable

Straight Through Jointing Kits HS Type suitable for 3x95 Sq. mm Cable

Cable Termination Kit Outdoor HS Type Suitable for 3x95 Sq. mm Cable

Cable Termination Kit Indoor HS Type Suitable for 3x95 Sq. mm Cable

GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,

Route and Joint indicating slab with MS Anchor rod

HDPE Pipe Grade PE100,PN 6.0 using horizontal drilling 160 MM dia for road crossing

HDPE Pipe Grade PE100,PN 6.0 using horizontal drilling 125 MM dia (for 240sqmm)

HDPE Pipe Grade PE100,PN 6.0 using horizontal drilling 110 MM dia (for 95sqmm)

Manufactured Sand (For to cover cable and Joint Pits)

Cable covering tiles 125x250x40mm (For to cover cable and Joint Pits)

CSS 500KVA AL Wound Transformer ,800A ACB 50KA 4 pole fixed type with microprosser based for LT Incomer and 4 nos 250A MCCB, 36ka PM based for outgoing

5 Way DAS RMU, One Incomer + Three Breakers + One out going (2OD + 3VL) 630 Amps with Copper Busbar

Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates

Foundation with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates

Providing Reinforecement TMT Fe 550/550D

Providing Plinth with CC 1:2:4 on the Stone Masonary [M-15] Using 20mm Nominal size graded crushed coarse aggregates

Construction of Stone Masonary

Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., complete.

Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing

GI Grounding pipe, B - Class, 42mm dia, 2.5mtrs long, 3.2mm thick with bolts nuts, GI Strips and washers complete. Minimum Weight of GI Pipe: 7.3 Kgs. Good Quality well burnt Charcoal for grounding pu...

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158:1991

Cable rising Clamp

Single Pole Mounted Transformer (SPMT) Kit for erection of Transformer on 11 Mtr Spun Pole as per IS-1977, (Three H Frame with Transformer Seating and Seating angle support cross arm for 11 Mtr Spun P...

Prefabricated Platform for erection of 250/100 kVA Transformer on 11 Mtr Spun Pole Structure involving Rectangular hollow Sections 96x48x4.87 Thk and 66x3x4.5 Thk, Circular hollow section of 165.6 OD ...

FRP grating sheet (30 mm thickness, 1.8 Mtr x 1.5) for Prefabricated structure

Bitumin Compound

Three H Frame without Transformer Seating and Seating angle support X arm for 11 mtr Spun Pole for 63/100/250/500kVA (UG Cable) - GI for 3GOS System

LT 4 Pin Cross Arm with clamps, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL

Spiral Earth Electrode

1.1KV Pin Insulator ceromic type with GI Pin

11 KV 45KN Polymeric Disc Insulator

No 8 KV Strain Insulator

HT Single Top Support with bolts, nuts & washers

11kV Polymeric Pin Insulator

Rabbit ACSR Conductor for jumps

Alkathene Tube 19mm Dia and in coils of 30 Mtrs

Guy Wire 7/10 SWG

11kV Solid Core Type HG Fuse Unit

11kV, 200Amps, Single Break GOS

11kV, 400Amps, Double Break GOS (Near Muss)

H frame For Mounting GOS 200A/400A GI

Earthing materials pipe type for grounding (Single Electrode with accessories)

LT Distribution Box for 100 kVA/250kVA DTC with MCCB's

(Sheet Metal) (Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018)

LT Wiring (From DTC to LT Line via Metering Box & LT Protection Kit) DOUBLE CIRCUIT A)Al Lead Wire - 240 Sqmm

B)Copper lugs - 240 Sqmm

C)wedge connectors - Rabbit to 240 Sq. mm

D)Spacers for DTC Wiring

E)Fish Plate with necessary Clamps,etc complete (Galvanised)

LT Metering box with CTs and necessary wiring for housing ETV Meter

LT Electronic Tri-Vector Meter 5A, Class-0.5/1.0 accuracy

11 kV Lightning Arrester, Metal oxide, 10 kV, 5 kA Polymeric Type with ground disconnector

PVC Insulation Tape in rolls of 10 mtrs

11 kV, Horizontal Cross Arm with clamps, HTST Supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL GI

Caution/Danger Board

Anti Climbing Device (12mtrs/1Kg GI Barbed Wire)

Conversion of existing Overhead electrical distribution system to UG system in Ullala City Muncipal Council areas (Part-1) - HT Line (Erection Portion)

Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site HDD Method-Normal Soil - 8” Bore (UG cable along with 160mm/125mm/1...

Laying of UG cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers - 3*240Sqmm

Laying of UG cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers - 3*95Sqmm

Straight Through Jointing Kits HS Type suitable for 3x240 Sq. mm Cable

Cable Termination Kit Outdoor HS Type Suitable for 3x240 Sq. mm Cable

Cable Termination Kit Indoor HS Type Suitable for 3x240 Sq. mm Cable

Straight Through Jointing Kits HS Type suitable for 3x95 Sq. mm Cable

Cable Termination Kit Outdoor HS Type Suitable for 3x95 Sq. mm Cable

Cable Termination Kit Indoor HS Type Suitable for 3x95 Sq. mm Cable

GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,

Route and Joint indicating slab with MS Anchor rod

Manufactured Sand (For to cover cable and Joint Pits)

Cable covering tiles 125x250x40mm (For to cover cable and Joint Pits)

Earth work excavation for cable trench of 0.5 to 0.75 mtr. Width and Depth upto 1 mtr. including trial pits, depositing on bank upto a lead of 50 mtrs,Supplying and Displaying necessary Danger Boards ...

Earth work excavation for cable trench of 0.5 to 0.75 mtr. Width and Depth upto 1 mtr. including trial pits, depositing on bank upto a lead of 50 mtrs,Supplying and Displaying necessary Danger Boards ...

Earth work excavation for cable trench of 0.5 to 0.75 mtr. Width and Depth upto 1 mtr. including trial pits, depositing on bank upto a lead of 50 mtrs, Supplying and Displaying necessary Danger Boards...

Refilling and consolidation

Cutting of road surface Tar road Dismantling of Flexible pavements and disposal of dismantled

materials and stacking serviceable and...

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Removing the existing stone slabs pavement and stocking the materials for excavating the trench with a lead of 50meter refixing the stone slab after refilling the trenches

Restoration of TAR Road: Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant ...

Restoration of TAR Road: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...

Restoration of TAR Road: Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by wei...

Restoration of TAR Road: Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous bin...

Restoration of TAR Road: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface appl...

Restoration of CONCRETE Road: Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the ...

Restoration of CONCRETE Road: Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per ...

Restoration of CONCRETE Road: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface...

CSS 500KVA AL Wound Transformer ,800A ACB 50KA 4 pole fixed type with microprosser based for LT Incomer and 4 nos 250A MCCB, 36ka PM based for outgoing

5 Way DAS RMU, One Incomer + Three Breakers + One out going (2OD + 3VL) 630 Amps with Copper Busbar

Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,

GI Grounding pipe, B - Class, 42mm dia, 2.5mtrs long, 3.2mm thick with bolts nuts, GI Strips and washers complete. Minimum Weight of GI Pipe: 7.3 Kgs. Good Quality well burnt Charcoal for grounding pu...

Construction of platform with size stone, cement concert for erection of CSS 800/500 KVA Construction of platform Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse ag...

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158:1991

Concreting materials for 11 Mtrs Spun Pole a) Base concreting 1:4:8, 1000x1000x150 mm

b) Pole concreting 1:2:4, 1000x1000x2500 mm

c) Coping 1:2:4

Single Pole Mounted Transformer (SPMT) Kit for erection of Transformer on 11 Mtr Spun Pole as per IS-1977, (Three H Frame with Transformer Seating and Seating angle support cross arm for 11 Mtr Spun P...

Prefabricated Platform for erection of 250/100 kVA Transformer on 11 Mtr Spun Pole Structure involving Rectangular hollow Sections 96x48x4.87 Thk and 66x3x4.5 Thk, Circular hollow section of 165.6 OD ...

Construction of platform with size stone, cement concert for erection of DTC Construction of platform Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates, Fo...

Three H Frame without Transformer Seating and Seating angle support X arm for 11 mtr Spun Pole for 63/100/250/500kVA (UG Cable) - GI for 3GOS System

LT 4 Pin Cross Arm with clamps, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL

Spiral Earth Electrode

HT Single Top Support with bolts, nuts & washers

Rabbit ACSR Conductor for jumps

11kV Solid Core Type HG Fuse Unit

11kV, 200Amps, Single Break GOS

11kV, 400Amps, Double Break GOS (Near Muss)

H frame For Mounting GOS 200A/400A GI

Earthing materials pipe type for grounding (Single Electrode with accessories)

LT Distribution Box for 100 kVA/250kVA DTC with MCCB's

(Sheet Metal) (Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018)

Fixing of LT Wiring (From DTC to LT Line via Metering Box & LT Protection Kit) DOUBLE CIRCUIT

LT Metering box with CTs and necessary wiring for housing ETV Meter

LT Electronic Tri-Vector Meter 5A, Class-0.5/1.0 accuracy

11 kV Lightning Arrester, Metal oxide, 10 kV, 5 kA Polymeric Type with ground disconnector

11 kV, Horizontal Cross Arm with clamps, HTST Supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL GI

Caution/Danger Board

Anti Climbing Device (12mtrs/1Kg GI Barbed Wire)

Releasing & Refixing of Service mains (single /three phase for consumer installation

Releasing and Re stringing of Rabbit Conductor

Releasing & Refixing of LT Metering box with CTs and necessary wiring for housing ETV Meter

Releasing & Re-Erection of 100/63/25kVA Distribution Transformer

Releasing & Re-Erection of 250kVA Distribution Transformer

Releasing & Re-Erection of 500kVA Distribution Transformer

Releasing of LA

Releasing of HG Fuse unit

Releasing of H Frame Set

Releasing of 200A GOS

Releasing of 9 Mts RCC POLE

Releasing of LT Distribution BOX

Releasing of LT Wiring Kit ( per circuit)

Releasing of Horizontal/Special/4Pin X Cross arm with clamps

Releasing of TC set 100/63/25

Releasing of DP structure complete including Pole

Conversion of existing Overhead electrical distribution system to UG system in Ullala City Muncipal Council areas (Part-1) - LT Line (Supply Portion)

LT Feeder Piller Box 12 Way as per technical specifications

GI Grounding pipe, B - Class, 42mm dia, 2.5mtrs long, 3.2mm thick with bolts nuts, GI Strips and washers complete. Minimum Weight of GI Pipe: 7.3 Kgs. Good Quality well burnt Charcoal for grounding pu...

PVC Insulation Tape 19mm wide of 10mtrs

Bitumin Compound

1.1kV LT UG XLPE GI strip armoured Insulated cables as per technical specifications - 240 Sqmm, 3.5 Core

1.1kV LT UG XLPE GI strip armoured Insulated cables as per technical specifications - 150 Sqmm, 3.5 Core

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 50 Sqmm, 3.5 Core (16 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 35 Sqmm, 3.5 Core (14 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 16 Sqmm, 4 Core (11 GI Strips - 4 x 0.8 mm)

Copper End Terminals (LUGS)-35 Sq. mm

Copper End Terminals (LUGS)-50 Sq. mm

Copper End Terminals (LUGS)-240 Sq. mm

Copper End Terminals (LUGS)-150 Sq. mm

Epoxy Termination kit (Pothead) suitable for 1.1kV 3.5x240 Sq. mm LT UG Cable

Epoxy Termination kit (Pothead) suitable for 1.1kV 3.5x150 Sq. mm LT UG Cable

Straight Through joint kit for 1.1KV LTUGC-HS Type 3.5C 240Sqmm

Straight Through joint kit for 1.1KV LTUGC-HS Type 3.5C 150Sqmm

Straight Through joint kit for 1.1KV LTUGC-HS Type 3.5C ,50Sqmm

Straight Through joint kit for 1.1KV LTUGC-HS Type 3.5C,35Sqmm

Straight Through joint kit for 1.1KV LTUGC-HS Type 4C,16Sqmm

RCC Hume Pipe, 2000mm Long, 150mm Dia

Collars for RCC Hume Pipe

GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,

Route and Joint indicating stones

Conversion of existing Overhead electrical distribution system to UG system in Ullala City Muncipal Council areas (Part-1) - LT Line (Erection Portion)

LT Feeder Piller Box 12 Way as per technical specifications

GI Grounding pipe, B - Class, 42mm dia, 2.5mtrs long, 3.2mm thick with bolts nuts, GI Strips and washers complete. Minimum Weight of GI Pipe: 7.3 Kgs. Good Quality well burnt Charcoal for grounding pu...

Laying of UG Cables by Horizontal 6'' bore size 3.5 *240Sqmm or 3.5*95sqmm Without HDPE Pipe(Normal soil)

Laying of UG Cables by Horizontal 6'' bore size 3.5*240Sqmm or 3.5*95sqmm Without HDPE Pipe(Rock soil)

1.1kV LT UG XLPE GI strip armoured Insulated cables as per technical specifications - 240 Sqmm, 3.5 Core

1.1kV LT UG XLPE GI strip armoured Insulated cables as per technical specifications - 150 Sqmm, 3.5 Core

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 50 Sqmm, 3.5 Core (16 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 35 Sqmm, 3.5 Core (14 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 16 Sqmm, 4 Core (11 GI Strips - 4 x 0.8 mm)

Epoxy Termination kit (Pothead) suitable for 1.1kV 3.5x240 Sq. mm LT UG Cable

Epoxy Termination kit (Pothead) suitable for 1.1kV 3.5x150 Sq. mm LT UG Cable

Straight Through joint kit for 1.1KV LTUGC-HS Type 3.5C 240Sqmm

Straight Through joint kit for 1.1KV LTUGC-HS Type 3.5C 150Sqmm

Straight Through joint kit for 1.1KV LTUGC-HS Type 3.5C ,50Sqmm

Straight Through joint kit for 1.1KV LTUGC-HS Type 3.5C,35Sqmm

Straight Through joint kit for 1.1KV LTUGC-HS Type 4C,16Sqmm

RCC Hume Pipe, 2000mm Long, 150mm Dia

GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,

Route and Joint indicating stones

Earth work excavation for cable trench of 0.5 to 0.75 mtr. Width and Depth

upto 1 mtr. including trial pits, depositing on bank upto a lead of 50 mtrs,

Supplying and Displaying necessary Danger Boards...

Earth work excavation for cable trench of 0.5 to 0.75 mtr. Width and Depth upto 1 mtr. including trial pits, depositing on bank upto a lead of 50 mtrs,Supplying and Displaying necessary Danger Boards ...

Earth work excavation for cable trench of 0.5 to 0.75 mtr. Width and Depth upto 1 mtr. including trial pits, depositing on bank upto a lead of 50 mtrs, Supplying and Displaying necessary Danger Boards...

Refilling and consolidation

Cutting of road surface Tar road Dismantling of Flexible pavements and disposal of dismantled

materials and stacking serviceable and...

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Removing the existing stone slabs pavement and stocking the materials for excavating the trench with a lead of 50meter refixing the stone slab after refilling the trenches

Restoration of TAR Road: Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant ...

Restoration of TAR Road: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...

Restoration of TAR Road: Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by wei...

Restoration of TAR Road: Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous bin...

Restoration of TAR Road: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface appl...

Restoration of CONCRETE Road: Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the ...

Restoration of CONCRETE Road: Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per ...

Restoration of CONCRETE Road: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface...

Conversion of existing Overhead electrical distribution system to UG system in Ullala City Muncipal Council areas (Part-1) - AB Cable (Supply Portion)

9Mts RCC Pole long 145KG WL (DWG No: BESCOM/GM/QS&S/51 dated 24.11.2018) as per IS-785

1.1kV Class 3 phase Aerial Bunched Cable 3x95+1x16+1x70 Sqmm

Three Phase Distribution box for 6 Connections

Piercing connector suitable for 16sqmm -95 sqmm AB cable - Service connections

Piercing connector suitable for 16sqmm -95 sqm in AB cable - street light connetions

Suspension clamp Assembly 16 to 95mm (Excluding pole clamp)

Pole clamp for HT/LT cable

Eye Hook (Flat type for fixing clamps)

Dead end clamp /anchor clamp assembly 25 to 95 sqmm

Universal Hook ,BoIts & nuts

T-connector KZ3 95

Cable straight thru joints kits suitable for 95sqmm

Pre-insulated lugs -CPTAU for 95sqmm

End cap for 50/70sqmm

Guy Set (Complete with No. 8 Strain Insulator, guy wire, guy rod)

PVC Insulated wire 25 Sqmm (Alluminium Multi strand)

Spiral Earth Electrode

Conversion of existing Overhead electrical distribution system to UG system in Ullala City Muncipal Council areas (Part-1) - AB Cable (Erection Portion)

9Mts RCC Pole long 145KG WL (DWG No: BESCOM/GM/QS&S/51 dated 24.11.2018) as per IS-785

1.1kV Class 3 phase Aerial Bunched Cable 3x95+1x16+1x70 Sqmm

Three Phase Distribution box for 6 Connections

Piercing connector suitable for 16sqmm -95 sqmm AB cable - Service connections

Piercing connector suitable for 16sqmm -95 sqm in AB cable - street light connetions

Suspension clamp Assembly 16 to 95mm (Excluding pole clamp)

Pole clamp for HT/LT cable

Dead end clamp /anchor clamp assembly 25 to 95 sqmm

Universal Hook ,BoIts & nuts

T-connector KZ3 95

Cable straight thru joints kits suitable for 95sqmm

Pre-insulated lugs -CPTAU for 95sqmm

End cap for 50/70sqmm

Guy Set (Complete with No. 8 Strain Insulator, guy wire, guy rod)

Guy concreting with Boulders, Mud and Sand

Spiral Earth Electrode

Releasing of 2Pin X arm

Releasing of 4Pin X arm

Releasing of 4ACSR

Releasing of 2ACSR

Releasing of Rabbit