ADDITION / ALTERATION AND SPECIAL REPAIRSTO OLD MARRIED ACCOMODATION AT DEOLALI UNDER GE DEOLALI

Amount

Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for rendering 10mm thick internal plaster with ready mix plaster on brick or concrete surfaces, complete all as specified.(Make/Brand:- ACC's "ACCOPLAST", C K Birla's "AEROCEN", Magic Plast, Speed Dry Mix's "ECO PLASTER"

M&L for 1.5mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.

M&L for rendering 5mm thick ceiling plaster with ready mix plaster on concrete surfaces, finished even and smooth without using extra cement all as specified. (Make/Brand:- ACC's "ACCOPLAST", C K Birla's "AEROCEN", Magic Plast, Speed Dry Mix's "ECO PLASTER"

M&L for 1.5mm thick wall care putty on ceiling complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying two coats of white wash complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @3.0 kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika

Supply only chicken wire mesh 22 gauge of size not less than 20X20mm all as specified & as directed by Engineer-in-Charge. Make : Swastik or equivalent as approved

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for glazed coloured ceramic tiles conforming to IS-13755, group B III , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 300mm or 405mm x 250mm x 6-7mm thick in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and as directed by Engr-in-Charge Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates). Make : M/s H R Johnson/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles.”

M & L for non skid coloured ceramic tiles conforming to IS-13755, group B II(b) , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 600mm x 7-8mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge.”

M & L for non skid coloured ceramic tiles conforming to IS-13755, group B III , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 600mm x 7-8mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in cement mortar (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M & L for dark shade, double/ultra charged vitrified tiles, first quality, conforming to IS-13006/EN/176 group B1a, 8, to 10mm thick, (square/ rectangular) polished, area of each tiles not exc exceeding 0.36 Sqm , in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge

M & L for dark shade, double/ultra charged vitrified tiles, first quality, conforming to IS-13006/EN/176 group B1a, 8 to 10mm thick, (square/ rectangular) polished, area of each tiles not exc exceeding 0.36 Sqm , on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including backing coat 10 mm in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for 30mm thick PCC 1:2:4 Type B1 with 20mm graded stone aggregate as in levelling course in floor complete all as specified and directed.

M&L machine cut cudappa stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for Granite (of any type and colour) , 20mm thick machine cut, set, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20 mm thick screed bed in cement mortar 1:4, as in kitchen platform, jamb/cill of window, ventilator, border, flooring and simillar work etc complete all as specified and as directed by Engineer-in-Charge.”

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed.

M&L for Machine cut kota stone slab on steps in single piece of any size 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sqm each complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100 mm X 50 mm size, applying PVC solvent cement and screwed with full body threaded, star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 120 mm X 50 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge.

S&F for 35mm thick factory made flush shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

S&F for 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.

S&F for powder coated anodised aluminium three track frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete as specified and as directed. Note:- Window shall be fixed as per three track frame TD drawings.

S&F for powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings such as suitable handle 01 No., locking arangement 01 No. and roller bearings 02 Nos in each shutter etc complete all as specified. Note: Window shall be fixed as per three track frame TD drawings.

S&F for powder coated aluminium ventilator shutters with frame not less than 0.60Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

M&L for 4mm thick sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.

M&L for 4mm thick sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

S&F for factory made Solid PVC frame (single rebated) of size 60X30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 X 8 sheet metal CSK screws complete all as specified and shown on drawing. (Note:-Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life) complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick solid core prelam both sides consisting leaf Partical Board of 25 mm thickness, lipped with 10mm (5mm X 2) thick X 25mm with one stiles and top rails and 10mm (5mm X 2) thick X 25mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, waterproof and fire resistant moulded PVC sheet with 2, 4, 6 raised panel design in different prelam colours on side after routing the Moulded design on flush door / particle board & 2mm prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the PVC liping etc comlpete all as specified & directed by Engineer-in-Charge, Manufacturers specification and drawing.

M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.

S&F for hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size.

S&F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F for aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.

S&F for 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 75mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size aluminium anodized handle complete all as specified and as directed.

M&L for 250mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

S&F for magnet catches with striking plate for closing of cupboard shutters complete all as specified.

Dismantling of boarding any description fixed in any position with nails complete all as specified and directed

S&F 18 mm thick plywood BWR type BB, fixed with screws to timber frame work complete all as specified and directed.”

M&L for 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer instructions etc., complete all as specified

S&F continuous (piano) hinges width of flaps (When open) in 40 mm , mild steel, bright finish or electrogalvanised.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repair 25mm dia fancy stainless steel curtain rod with fancy fixing brackets, fancy stops/supports, rollers etc. complete all as specified.

S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed complete all as specified.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. Make: Commander/ Hindware/ Parryware

S & F in repairs counter type wash basins, vitreous china, white, flat back, size 580 mm X 450 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and directed by Engineer-in-Charge. Make: Jaquar Cat Part No. KUS-WHT-35935 or equivalent as approved by GE

S&F in repairs 15mm bore two way mixing pillar/sink taps for mixing of hot/fresh water and cold water for WHB/Sink, chromium plated, fancy type with long screwed shanks complete all as specified and as directed. Make : Jaquar, Cat Part No. COP-309PM (For Kitchen Sink mixer), Jaquar, Cat Part No.COP-167BPM (For Wash basin)

S&F in repairs CP mixer for mixing (HOT/COLD) water , with wall cap of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed. Make : Jaquar, Cat part No. COP-281PM

S & F in repairs 15 mm bore overhead shower 160X160 mm Square (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 300 mm long Square shape with wall flange complete all as specified and as directed by Engr-in-Charge. Make:- JAQUAR Cat Part No. OHS-35495”

S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. Make : Jaguar, Cat Part No. ACN-1111SM

S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed Make : ESS ESS CROMA Cat Part No C 202B or Equivalent of JAQUAR.

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S&F in repair CP fancy type stop/angle valves, cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed. Make : Jaquar, Cat part No. COP-057PM / ESS ESS CROMA Cat Part No C 204.”

S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge. Make- Blue Star/ Prayag/ Jindal/Nirali”

Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. complete for following capacity of tanks 500 ltrs

S&F 500 ltrs capacity rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete

All as per Sl Item No. 73 above but except water tank & ball valve.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F 15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors

S&F in repair 20mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

All as per item No 85 but except pipe complete all as specified and directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

All as per item No 88 but except pipe complete all as specified and directed

S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F forn110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair stainless steel soap dish, approximate size 130x120x30mm complete all as specified and as directed. Make : Jaguar, Cat Part No. ACN-1131N

S&F in repair 8mm thick glass shelf corner with brackets wall mounted qtr circle type, approximate size 300x220x50mm with SS wire railing complete all as specified and as directed. Make : Jaguar, Cat Part No. ACN-1173

S & F in repair 15 mm bore, fancy type, health faucet with SS hose complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 232D or JAQUAR Cat Part CAN-1121BN”

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S&F for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S & F Aluminium anodised grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/screwed attachment complete all as specified and directed by Engineer-in-Charge. Note- Aluminium grill shall be of Deco Grill of M/s ELESAR FOCHHI Ltd as per design no. DG 102, 7.5mm i.e. 6mm thick & 7.5mm wide or approved design in M/s Royal grill/National grill.”

S & F for steel work in tubular trusses box section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grade St 240 complete all as specified.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor upto 1.2Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, complete all as specified and as directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.

M & L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas.

Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No. 106 above but 6mm to 8mm dia.

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling of timber scantlings framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

M&L second class hard wood clean swan, timber fixed in scantling of unframe roof work all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil.

Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm.

Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge.

M&L for Providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and as directed .

M&L for preparation of New or previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down carefully existing unserviceable bitumen felt/ APP membrane including plaster (any number of layers of any thickness) etc and removing of the rubbish to a distance not exceeding 500m from the building and depositing where directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top and sides finished even and smooth without using extra cement, mixed with water proofing liquid complete all as specified. Note: Water Proofing liquid shall be measured and paid separately.

M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work/moulds etc including applying cement slurry on surface area @2.50 Kg/Sqm complete all as specified and as directed .

M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm. ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's. iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturer's instructions and as directed .

S & F Modular Kitchen cabinates including all fittings and fixtures incl the following. (a) 19mm thick plywood of commercial block board, Make : Kitply or Duro. (b) 0.9mm thick commercial lamination on both side fixed to block board (colour and design as approved) (c) SS pullout basket SS finish of plain 15" x 20" x 6" (d) 'D' type handle 100 mm SS finish. (e) Pullout basket SS finish cutlery wire of size 15" x 20" x 4" (f) 2nd class hard wood as in frame work (g) SS channels for pullout basket as required. (Note:- The measurement shall be taken from front elevation and not girth wise)

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick mangalore tile pattern in Red colour). having tensile strength of 550 Mpa in roof covering /cladding to wall,fixed with self tapping screws as specified

S&F readymade pully operated cloths drying system including of 04 aluminium pipes of 2.70 RM long each (04 Pipes set) outer dia 22mm and Inner dia 19.8mm. channel assembly, locking system ropes and all fixing materials complete all as specified and directed. Make : Easydry or equivalent make

Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittings and making good disturbed surfaces of walls, floor etc.complete all as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Point wiring complete with 1.5 Sqmm (nominal area) unsheathed multistranded FRLS copper conductor in PVC concealed conduit including fittings and accessories with one run of continuous PVC insulated stranded FRLS copper cable conductor of same size as in phase/neutral cable connecting to common earth dolly including sunken terminal box and plastic laminated sheet top cover for mounting of switches, sockets, regulators etc. for one light point, bell point controlled by one switch , fan point controlled by one switch through regulator complete all as specified and directed for following:-

(a) One light point controlled by one switch.

(b) One fan point / Exhaust fan point controlled by one switch

(c) One 5 pin socket outlet. 5 Amps on the same board.

(d) One 5 pin socket outlet. 5 Amps on the independent. board

(e)One bell/ buzzer point controlled by one push button

(f) One light point contro?lled by two 2-way switches

All as item No- 125 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied .

Supply and fix switch piano flush type single pole 2 way 5 Amps complete all as specied .

Supply and fix Bell push button SP 6 Amp, flush type complete all as specified .

Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed.

Supply and fix switch socket combination 5 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 5/6 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F of lamp angle/batten holder Bakelite including emergency LED lamp 12 Watt complete all as specified and as directed.

S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model- Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj

S & F Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.. Make Havels, model- LHDL06160099 (CITY 3) or equivalent in Wipro/ Philips/Bajaj

Supply and fix fan regulator 100 watts electronic type for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc complete all as specified and as directed.

Supply and fix sheet metal enclosure DBs SPN 8 way, double door, 240V with 200 Amps rated bus bars complete all as specified and as directed.

Supply and fix MCB SP 5 to 32 Amps, 240 volts complete all as specified and as directed.

Supply and fix MCB SPN 32 to 40 Amps, 240 volts complete all as specified and as directed.

M & L sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 6.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals complete all as specified and directed in PVC conduits Note :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 225 mm. Make Bajaj/ Crompton/ Havells

Supply & fixing/ Install newWater Heater(Gyser) White colour 25 Ltr tank capacity Metal Body type with complete connection & fixing on wall with suitable higes and clamps accessories all as specified and directed by Engr-in-Charge. Make : Havells Model:-Puro Turbo (cost fo the fixing arrangement deed to be included in rate quoted.

S&F PVC Connection pipes,15mm size with PTMT nuts of length 375 mm suitable for both hot and cold water all as specified

M&L for cable TV Jack ( Port)

M & L for bracket made out of GI tubing 32 mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos with M.S nuts bolts -4 Nos with flat washer (3mm thick) -02 No for each including painting with aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as directed at site.

S&FENDURA PEARL 25 W MP New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 Make. Havells, Model- ENDURAPEARLSL 20WLED757 SASYTOPCMP or equivalent in Wipro/ Philips/Bajaj

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion

S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed.

M & L for power line sheet metal enclosure double door surface mounting distribution board suitable for MCCB TP/TPN as incomerl for 415 Volts 4 way with 200 Amps bus bar ( without MCCB & MCB) with metal door. Make: L&T, Model-DBVTL004DD

M&L for MCCB TPN 100 Amps, 30 KA, 440V 50Hz, . Make L&T or equivalent

Taking down care fully ceiling fans 1200 mm to 1400 mm sweep, keeping in safe custody painting with 2 coats of white enameled paint & refixing the same after completion of B/R work all as specified and as directed( Note: minor accessories like capacitors, flexible wire , connector & hanging clamps with rubber bush and 02 Nos nut and bolts is deemed to be included in rate quoted)

S&F emergency LED batten 20W, 6500K with power backup upto 3 hrs, overcharging and deep discharge protection, high grade polycarbonate and surge protection upto 4KV complete all as spefifide and directed.

S&F exhaust fans made of sateel body complete with louvers shutters, 230V, 50Hz, 1200 RPM copper winding including making necessory arrangment / space / hole in wall for mountingand making good complete all as spefifide and directed.

L.K.R.TIWARI CONSTRUCTION

Horizon Construction

Nexus Infratech

sapana enterprises

DARSHAN CONSTRUCTION Co.

Brahma Infra

M/S TIKAM CHAND JAIN