Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC BHAIRAVNATH NAGAR AT KUSGAON POST LONAVLA 410 401 DISTT PUNE | PUNE | MAHARASHTRA | 410401 | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | L2₹18.1 L+₹95,081 (5.54%)Rejected-Finance GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹17 L
EMD Value
₹34,000
Closing Date
25 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
P Bangar Raju,IDSE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
REPAIR TO TILLING WORK, SANITARY FITTING, WELCOME MAINT AND PERIODICAL SERVICES TO CERTAIN BLDGS AT AIR FORCE STATION LONAVLA
2022_MES_542693_1
GE/LONAVLA/8086/E8
Open Tender
Civil Works
Item Rate
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹34,000
Yes
11 Nov 2022
2 Aug 2022
27 Aug 2022
2 Aug 2022
25 Aug 2022
12 Aug 2022
2 Aug 2022 - 11 Aug 2022
Amount
Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articlescomplete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in kitchen platform and similar work laid, bedded and pointed in cement mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed.
M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 etc: complete all as specified and directed.
M&L for Rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles etc: complete all as specified and directed.
M&L for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, complete all as specified and directed.
M&L for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc.complete all as specified and directed.
M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of oil bound distemper over necessary cement based putty where as reqd etc complete all as specified and as directed.
S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specifed and as directed.
M&L for Glazed (Coloured) ceramic tiles in vertical surfaces 300 x 450 x 8 to 9 mm/ 450 x 350 x 8 to 9 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchetccomplete all as specified and as directed.
M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including 15mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.
Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.
Taking down existing doors/windows/ventilators frame with shutters ( without taking off shutters from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed.
S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed.
S & F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S/F 100mm stainless steel butt hinges.
S/F 150mm length extruded aluminium alloy handles,fabricated type, anodised.
S&F200mm length aluminium anodised barrel tower bolt of extruded section.
Taking down existing doors/windows/ventilators (without taking off shutters and guard bars) of exe 1.5 sqm & n. exc 4 sqm etc complete all as specified and as directed incl stacking the materials properly.
Taking down Shutters of any Description exc 1Sqm but n.exc 2 Sqm Each complete all as specified
M&L for powder coated aluminium three track, three shutter (of equal width) sliding type window without sash bar including necessary jointing clip, rubber packing, neoprene rubber gasket, locking arrangement (star lock) bearing (two no's for each sliding shutter ) &4 mm thick plain glass for glazing with for two shutters and aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire stapless complete all as specified and directed for one shutter & including following powder coated section as given in 'JINDAL' catalouge complete all as specified and as directed (i) Frame (Bottom) -20620, (ii) Frame top & Side - 20621, (iii) Shutter Vertical (Handle Lock) - 20846, (iv) Shutter Vertical -(int lock) - 20845, (v) Shutter (Top) - 20844, (shutter Bottom) - 20847
S&F aluminium ventilator louvered type without sash bar section as per designation 63400 of IS 737 approved by GE( minium 15 micron anodised) including necessary jointing clip, rubber packing,including necessary locking arrangement , anodised snap beading screws and 4mm thick pin headed glass etc complete
S&F factory made Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as directed by EIC
S&F for 35 mm Factory made Moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness,lipped with 15 mm (5mm x 3) thick x30 mm width on the other stiles & bottom rails & 10mm (5mm x 2) thick x 30 mm width on other stiles & bottom rails , The inner panel laminated with 2 mm thick termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC Lipping and manufacturer's specification & drawing etc, complete all as specified and directed.
Ditto all as SI Item No 17 above but wire gauzed i.e pannel will be of wire gauze in lieu of single side prelam PVC sheet pannel. The wire gauze shall be wrapped on an addtional square 8 mm MS solid tube and and this tube shall be welded to MS tubes. The wire shall be streched to tighten firmily all as specified and directed
S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 300mm length.
S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165
S&F stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali, Bule star ISI marked.
S&F in repairs stainless steel kitchen plate rack of size 90cm X120cm X 1mm thick (18 gauge)conforming to the sample kept in the office of the AGE B/R , complete all as specified and directed.
S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed.
S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed..
S&F in repairs Low / high level flushing cistern 10 ltr capacity, PVC valveless, syphonic action incl waste pipe, pair of CI brackets and all accessories complete all as specified and as directed.
S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.
S/F low density polyethene pipes (LDPE) 40mm of pressure rating 6 Kg/cm2 fixedcomplete to walls, ceiling or laid in floors etc, complete all as specified and directed.
S&F in repairs brass chromium plated shower rose with or without swivel joints 75mm size, including fixing to steel pipe or union complete all as specified and as directed.
S&F in repairs Bib taps, fancy type, chromium plated with crutch sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and as directed.
S&F in repairs Stop valves, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch , screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs Angle cock, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair PVC connections, 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.
S&F in repairs toilet paper holder of stainless steel of size 10.5cm X 9cm fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.
S&F in repair soap dish Cat No BA -25 of Prayag polymers Pvt Ltd or equivalent complete all as specified and directed.
S&F acrylic cabinet mirror of size 450mm X600 mm fixed with wooden plugs with chromium plated screws and cup washers, complete all as specified and directed. Make shall be of M/s commander/M/s Jasmine or equivalent.
S&F in repairs Towel Rail, 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats . (Minimum weight 190gms) complete all as specified and as directed.
S&F in repairs hand shower (Health Faucet), chromium plated with 8mm dia, 1.00m long flexible tube with wall hook all as specified and as directed. Cat No:- ALD - 573 of Jaquar or equivalent model Manufactured by Esess/ Marc.
S&F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15mm bore fancy type. Make -Jaqur,Prayag polymers Pvt Ltd or equivalent.
S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all fittings such as tee, bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete including taking down existing GI pipe 15/20 mm and removing from site all as specified and as directed.
Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing GI pipe 15 mm and removing from site all as specified and as directed.
Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing GI pipe 15 mm and removing from site all as specified and as directed.
S&F tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete including taking down existing GI tubing 25 mm bore and removing from site all as specified and as directed.
Cutting and grooving of wall for fixing of pipe lines and making good of all cutting surfaces etc complete all as specified and directed.
S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 20 mm bore complete all as specified and directed.
S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.
Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends and fittings etc complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.
S&F 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.
S&F 75mm bore PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed.
S&F 110mm bore PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed.
S&F 75mm bore PVC (SWR) branch piece, single (single Y ) equal or unequal with access doors etc, complete all as specified and as directed.
S&F 110mm bore PVC (SWR) branch piece, single (single Y ) equal or unequal with access doors etc, complete all as specified and as directed.
S&F 75mm bore PVC (SWR) junction single (single T ) equal or unequal with access doors etc, complete all as specified and as directed.
S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and as directed.
Taking down cement or cement lime plaster on brick masonary or concrete surface in wall and ceiling etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish outside MD land etc complete all as specified and directed.
M/L for rendering 12 mm thick in CM 1:6 on brick walls finishing with sagol even and smooth (with out using extra cement)etc complete all as specified and directed.
M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as in ceiling and finishing the surface even and smooth with sagol including taking down and removing debris outside MD land etc complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 3.00 mm thick white cement based wall care putty complete all as specified and as directed.
M&L for preparation of new plastered surfaces on ceiling and applying three coat of white wash etc complete all as specified and directed
Demolition of concrete in sunken floor incl removal of filling etc complete incl removal of demolished material to a distance as specified.
M&L for plaster/bedding layer in CM (1:3) 15 mm thick on floor/vertical surfaces of sunken slabs and finishing the top surfaces even and smooth without using extra cement but using integral water proofing compound, and apply a uniform coat of blown grade bitumen 85/25 @ 1.2 Kg/Sqm over a coat of primer @ 0.70 Kg/sqm over plastered surfaces after the plastered surface is cured and dried up etc complete all as specified and as directed. Note:- Integral water proofing compound shall be measured and paid separately as "Supply only".
Supply only integral water proofing compound.
M&L for plain cement concrete, Type E2 (1:5:10) mix (Using 40 mm graded stone aggregates) for filling in sunken floor and mass concrete complete all as specified and as directed.
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
S&F for Pre- Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc.
S&F 20mm dia SS curtain rod with fancy brackets with fixing arrangement complete all as specified and directed
S&F of 4mm thick 'E' classic designer board false ceiling with powder coated GI snap grid frame work of grid size 600 x 600 mm including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B 0 Cement motar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix items as under :- (a) 27x27x0.55 mm thick GI angle powder coated duly plugged @ 600mm centre to centre alongwith perimeter of wall. (b) 25x25x0.55 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick AC "E" Classic designer board of approved texture and finished complete. Note. The complete ceiling work shall be done as per manufactures instruction and as directed.
M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on the walls, pillars, cornices etc complete all as specified and as directed.
All as per Srl Item No 1 here-in-before but on ceiling
All as per Srl Item No 1 here-in-before but one coat of cement base paint
All as per Srl Item No 1 here-in-before but two coat of cement base paint
All as per Srl Item No 1 here-in-before but one coat of oil bound distemper
M&L for removal of existing treatment of old painted wall surfaces and praparing and applying two coat of oil bound distemper over alkali resistance primimg paint primer over 3.00 mm thick white cement based wall care putty smooth finish etc of approved make & shade on walls and other places complete all as specified and as directed.
M&L for preparation of old painted surfaces of wall and applying one coat of exterior grade, weather resistant antifungal acrylic latex paint complete all as specified and directed.
M&L for removal of existing treatment of external surface of wall including removing fungus /algae dirt, oil, grease and loose particles by wire brush,cleaning, washing and removing dust, and applying two coats of exterior grade weather resistant, antifungal acrylic latex paint over one coat of acrylic primer on walls, chajjah after filling of cracks using crack filler complete all as specified and as directed.
M&L for preparation of old painted wood surfaces of any description having width/ girth execeeding 10cm and apply one coat of synthetic enamel paint complete all as specified & as directed.
M&L for preparation of old painted wood surfaces of any description having width/girth execeeding 10cm and apply two coats of synthetic enamel paint complete all as specified and as directed.
M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and apply one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description having width or girth exceeding 10 cm and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&L for rendering in patches 15 mm thick in cement mortar 1:6 on walls and finished even and smooth without using extra cement including taking down cement plaster on brick/concrete surfaces and raking of joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M &L for rendering 15 mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and smooth (without using extra lime or cement) including taking down cement plaster on brick/concrete surfaces and raking of joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for preparation of new external surface of wall applying two coats of exterior grade weather resistant, antifungal acrylic latex paint over one coat of acrylic primer on walls, chajjah after filling of cracks using crack filler complete all as specified and as directed.
M&L for obilatering old writing of any description, n exc 0.1 sq m, with paint to match existing work complete all as specified and as directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specified and as directed.
M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc complete all as specified and as directed. Note for Sl item No 1 to 25 :- (i) Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (ii) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (iii) Unit rate quoted shall be deemed to include for necessary shifting of tables, movable cupboards and other articles required for execution and placing in same position after completion of the work. (iv) Unit rate quoted shall also include for removing of nails, making good holes, cracks etc to match with the existing surfaces.
M/s S.D Construction Co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .