REPAIR TO ALL TYPES OF WOODEN CHAIRS TABLES RIFLE RACK SIDE BOARD BOOK CASE WOODEN TEAPOY PEG TABLE TABLE CENTER TABLE DINING ETC FOR OTM AND MD ACCN AT AF STN BAMRAULI UNDER GE AF BAMRAULI

REPAIR TO CHAIR WOODEN BOTTOM / CHAIR BKB (FD- 285) Material and labour in replacement for seat of chair wooden bottom, made out of 6 mm thick commercial plywood of BWR grade of make century/archid/greeply duly laminated wtih 0.8 mm sunmica sheet (perforated in the centre) fixed with 12 Nos screws of suitable size, all as per drawing and as specified and directed by the Engineer-in-Charge. Common Notes for : Repair of under mentioned furniture items will be carried out as follows (Sl No 1.00 to 22.07):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (Sl No 1.00 to 22.07) (b) Work will be executed where the furniture exist in different User Units of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge (Sl No 1.00 to 22.07):- (c) All Timber shall be of 1st class seasoned hard teak wood (Shagwan/ Assam Teak ) free from knots and cracks else specified in drg. (Sl No 1.00 to 22.07). (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (Sl No 1.00 to 22.07) (e) For wooden items:M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surfae smooth by sand paper (Emery paper) with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing/painting .(Sl No 1.00 to 22.07 where ever applicable ) (f): For steel items:- M&L for painting two coat of hammer Tone paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge.here should be atleast one day gap between every step of painting. Note: All material will be used to execute the work should be supplied by contractor in full no peacemeal material will be execpted.(Sl No 1.00 to 22.07 where ever applicable).

Material and labour in replacement for damaged front leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged rear leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged back rest of chair wooden bottom with new back rest of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged side rail of chair wooden bottom with new side rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged front rail of chair wooden bottom with new front rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged back rail of chair wooden bottom with new back rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged stiffener of chair wooden bottom with new stiffener of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of melamine polish dulu smooth and prepared surface of approved quality with high gloss finish complete all as specified and as directed.

REPAIRS TO CHAIR EASY (FD - 229) Material and labour in replacement for damaged front leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.