REPAIR TO JOINERY, STEEL WINDOW, WIRE MESH, VENTILATORS ETC IN MD AND OTM ACCN UNDER AGE B/R - I AT ITARANA ALWAR

Amount

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each.

Taking down chowkat or frame with shutters area not exc. 1.5 Sqm each (without taking off the wooden shutters from the frame) complete all as specified

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) complete all as specified.

Taking down frame with shutters for window / ventilator area not exc. 1.5 Sqm each (without taking off the shutters from the frame) including guard bars of any description complete all as specified

Taking down frame with shutters for window / ventilator area exc. 1.5 Sqm but not exc 4Sqm each (without taking off the shutters from the frame) including guard bars of any description complete all as specified

Dismantling of stone chowkhat of any description all as specified and as directed.

S&F 100x75mm single rebated Karoli stone chowkhat with exposed faces closed picked dressed including 4 bolt per upright, erected in position and bedded and pointed in CM 1:3.

Supply and fixing flush shutter of 30 mm thick solid core construction with particle board core and plywood face panels with commercial type on both sides complete all as specified.

Supply and fixing factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

M&L for prelaminated particle board 18/19mm thickness, interior grade, prelaminated both side with decorative choice laminations fixed with aluminium frame all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, handle including one shop coat of Zinc Chromate primer complete all as specified.

Supply & fixing factory made ‘Z’ type section steel windows with side hung shutters including projecting type hinges with steel handles and peg stay with glazing bars dovetailed or welded including one shop coat of Zinc Chromate primer complete all as specified.

Supply & fixing factory made ‘Z’ type section steel windows with side hung shutters including projecting type hinges with steel handles and peg stay without glazing bars dovetailed or welded including one shop coat of Zinc Chromate primer complete all as specified.

S&F mild steel framed work as in doors / gates / steel frames etc. of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165(Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position complete.

Supply and fixing 300 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified.

Supply & fixing butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified.

Material and labour preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

S&F in repairs powder coated mild steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

S&F in repairs PVC knob for PVC coating 25 mm dia wood finished type drapery rod, coloured as approved by GE.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3, exc half brick & not exc one brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)

Supply and fixing 200 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified

Supply and fixing in repairs 200 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified

Supply and fixing 150 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified

Supply and fixing in repairs 150 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified

Supply and fixing 150 mm long mild steel pressed handle, oval type, stove enameled black complete all as specified

S&F stainless steel butt hinges of size 100mm complete all as specified.

Supply & fixing aluminium handle 150mm size cast type, anodized complete all as specified.

Supply & fixing in repairs aluminium handle 150mm size cast type, anodized complete all as specified.

Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

Supply and fixing in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

S&F in repairs 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 as in sheet lining to wooden door fixed with brass CP screws of size 25x8 including `U’ shaped edging all as directed.

S&F in repairs mild steel plain black sheet 1.25mm thick in hearths, covering to door shutters etc., cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to steel members etc with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc. as required and all as directed.

S&F mild steel framed work such as grills, ladders, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar works of Gde E-165(Fe 290) including welding etc. complete all as specified & as directed.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. and fixed in position.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Hacking out old broken glass any thickness, size, quality or description from wooden frames or stone, concrete or brick surroundings, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, glazing in repairs, complete all as specified.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, glazing in repairs, complete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified

S&F 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified.

M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, fixed with nails , sectional area exc 13 sqcm and not exc 25 sqcm .

S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified.

S&F 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished.

S&F factory made solid PVC door frame of size 50mm x 95mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube in opening as per specifications.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement.

Supply and fixing mild steel cupboard shutter with frame, Godrej Pattern, made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

S&F anodized aluminium frame for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F 4.8mm thick sheet glass ordinary quality and glazing with aluminium beading in square not exc 0.5 sqm in each pane complete all as specified.

Supply and fixing brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

Supply and fixing in repairs brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

Supply and fixing door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked) complete all as specified & as directed.

Supply and fixing in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked) complete all as specified & as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

Material and labour brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.

M&L brick work with subclass 'B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified.

M&L for rendering 15mm thick in cement plaster 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified.

Material and labour preparation of newly plastered surface of walls & applying three coats of white wash complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in flooring or levelling coarse 25mm thick complete all as specified & as directed.

M&L for glazed ceramic tiles (coloured) 450mm x 350mm x 7mm thick Ist quality on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick Ist quality (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick rendering (as screed bed) in cement & sand mortar 1:6 complete all as specified and as directed.

Repairs to wooden shutter rescuring or easing and adjusting without taking down of shutter exc 1sqm and n exc 2sqm each as required including renewal of unserviceable screws all as directed.

M/s Laxmi Enterprises

M/s S Amarjit Singh