GE(S) BTD 42 of 2019-20 SPECIAL REPAIR TO BLDG NO. OP 6 MD ACCN IN OLD NILIGIRI ENCLAVE AND CERTAIN OTHER SANCTIONED WORKS UNDER GE(S) BATHINDA AT BATHINDA MIL STN

Amount

S & F in repairs 15mm bore fancy type chromium plated brass bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaquar Cat part No. ORP-10037PM or any other equivalent make approved by GE from the list of make attached tender documents.

S & F 15mm bore chromium plated brass bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaquar Cat part No. DRP-37037 or any other equivalent make approved by GE from the list of make attached tender documents.

S & F in repairs 15mm bore, fancy type, chromium plated, angle cock, cast coppler alloy, screwed both ends for iron pipe complete all as specified and directed. Make:- Jaquar Cat part No. ORP-10057PM or any other equivalent make approved by GE from the list of make attached tender documents.

S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaquar Cat part No. ORP-10053PM & ALD-083 or any other equivalent make approved by GE from the list of make attached tender documents.

S & F 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated shower rose 140 mm size, with swivel joints, including fixing to steel pipe or union, complete. Make:- Jaquar Cat Part No. OHS 1757 or equivalent model of approved make from list of make attached in tender documents.

Supply and fixing in repair 15mm bore, brass CP single lever basin mixer, screwed down, screwed for iron pipe, complete all as specified and as directed by Engineer-in-Charge. Make:- Jaquar Cat Part No. VGP-81011B or equivalent model of approved make from list of make attached in tender documents.

Supply and fixing in repair 15mm bore, brass CP single lever sink mixer, screwed down, screwed for iron pipe, complete all as specified and as directed by Engineer-in-Charge. Make:- Jaquar Cat Part No. ORP-10173BPM or equivalent model of approved make from list of make attached in tender documents.

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450mm of approved quality complete all as specified and directed. Make:- Jaquar Cat part No. ACN-1181FN or any other equivalent make approved by GE from the list of make attached tender documents.

S&F in repairs vitreous china wash down water closet pan with integral flushing cistern and seat cover single piece including connection to drain (or outgoing pipe) including all accessories for fixing and making the seat fully functional etc. complete all as specified and directed. Make:- Jaquar Cat Part No. LYS-WHT-0204 or as approved by GE from list of make attached in tender documents. Make:- Jaquar Cat part No. ACN-1111NM or any other equivalent make approved by GE from the list of make attached tender documents.

S & F in repair vitreous china wash basin with full pedestal, flat back, 830x560x480mm including waste fitting/pipe & brackets including cutting for and pinning in ends of brackets or errecting stand complete all as specified and directed. Make:- Jaquar Cat part No. ARS-WHT-0614F & ARS-WHT-1509 or as approved by GE from list of make attached in tender documents.

S & F brass chromium plated overhead shower square ( 150mmx150mm) with rubit cleaning system with suitable shower arm 300mm length complete all as specified and directed. Make:- Jaquar Cat Part No. OHS-1805 or as approved by GE from list of make attached in tender documents.

S & F in repair single lever exposed shower mixer with provision for connection to exposed shower pipe & hand shower with connecting legs and wall flange complete all as specified and directed. Make:- Jaquar Cat Part No. LYR-38145 and SHA-1213 or as approved by GE from list of make attached in tender documents.

S & F in repair health faucet brass body with wall hook and 1 mtr SS pipe complete all as specified and directed. Make:- Jaquar Cat Part No. ALD-CHR-573 or as approved by GE from list of make attached in tender documents.

S&F stainless steel plate racks of size 900x600x250mm and thickness of SS strip of 1mm fixed wall etc. complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified

M&L for 25mm dia stainless steel pipe curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes/pelmet box etc as per site condition with accessories complete all as specified and directed.

S & F towel rack 600mm long with lower hanger complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges all as specified

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

Fixing only cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed. Note:- Old pipe obtained from serial item No.of BOQ is to be used in this item

Fixing only cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed. Note:- Old pipe obtained from serial item No.of BOQ is to be used in this item

S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified

S & F in repair 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed

S & F in repair 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed

S & F in repairs 100mm bore cast iron cowl fixed with cement joint in (1:2) cement mortar complete all as specified .

S & F in repairs (fixing with screws or welding as per site requirement) 300mm mild steel ordinary rat tail rod springs ( Helical Springs), including roller & roller plate complete all as specifiedand directed.

S & F catcher such as in cupboards etc to catch and support shutters of best quality complete all as specified and directed.

S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.

S & F hasp & staple 100mm size, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane all as specified

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each exceeding and removal from site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Taking down or up 25 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including connection to existing PVC tank complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and directed.

Refixing old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed. (i) Cleaning of pipe is included in seperate item here in before. (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required at site.

Refixing only old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed. (i) Cleaning of pipe is included in seperate item here in before. (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required at site.

Refixing only old GI tubing 25 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed. (i) Cleaning of pipe is included in seperate item here in before. (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required at site.

S & F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 25mm bore ( weight 455gms Minimum) complete all as specified

Supply and fixing three layers 1000 liter HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including S&F of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs ( to be fixed with screws & welding as required) continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm complete all as specified and directed.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

M & L for painting to old wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with one coat of synthetic enamel paint including preparation of surfaces complete all as specified and directed.

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and as directed by Engineer-in-Charge.

M & L for painting to old steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with one coat of synthetic enamel paint including preparation of surfaces.

S & F in repairs 110 mm bore of 6 kg/CM Square pressure fixed to walls with MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties n.exc .1.80 mtr centre to centre distance complete all as specied and directed.

S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.

M & L for flush pointing to brick walls in CM 1:4 including raking out joints/pointing etc. complete all as specified and directed.

S & F in repair chromium plated towel ring complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed.

S & F in repair Corner glass shelf (25cm/30cm ) with CP brass bracket & railing etc; complete all as specified and directed.

S & F PTMT mirror cabinet of size 380x450mm best quality conforming to sample kept in GE office complete all as specified and directed.

S & F in repairs soap dish stainless steel as per sample available in AGE B/R-I office, complete all as specified and directed.

S & F in repairs Toilet paper holder recessed type stainless steel as pe sample kept in AGE B/R office complete all as specified and directed.

S & F peg set /coat hook ( set of 5 fixed on one strip), stainless steel as pe sample kept in AGE B/R office complete all as specified and directed.

S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/gullytraps/fittings if required and shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified

Supply only floor trap 75 mm dia with grating including jointing to waste pipe

Material and labour for reinforced cement concrete M-25 using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. & mass concrete complete all as specified and directed by Engineer-in-Charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for reinforced cement concrete M-25 using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for reinforced cement concrete M-25 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5 metre clear span, cills, steps, seismic and other similar bands, beams, parapets upto 60cm height and the like including weathering, slightly rounded or chamfered angles and throatings etc. complete all as specified and as directed by the Engineer-in-Charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.)

Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Material and labour for mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas/beams/colns/fins/facia and spiral stair case not exceeding 200mm tick complete all as specified and directed.

Form work to sides of pillars , posts, struts piers, columns and stanchions and similar works rough finished complete all as specified & directed by Engineer-in- charge.

Formwork for rough finished surfaces to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L brick work with sub class `B' old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with sub class `B' old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.

M&L brick work with sub class 'B' old size bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks, in one brick thick hone comb walling built in CM (1:4), etc; complete all as specified and directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L 25mm thick cement concrete 1:2:4 type B-1using 20 mm graded crushed stone aggregate as in floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed.

Material and Labour for PCC 1:5:10 type E-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed by Engineer-in-Charge.

M& L for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & fair, complete all as specified and directed. (Building height upto two story)

M& L for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth without using extra cement complete all as specified and directed. (Building height upto two story)

M& L for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth using water proofing compund but without using extra cement complete all as specified and directed. Note:- Water proofing compund shall be measured and paid separately in this BOQ.

M&L for 15mm thick rendering in CM (1:6) on other than fair faces and finishing even & fair, complete all as specified. (Building height upto two story)

M&L for 15mm thick rendering in CM (1:6) on other than fair faces and finishing even & smooth without using water proffing compound complete all as specified and directed.

M & L for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of old decorated, plastered/unplastered or concrete surfaces on ceiling including cornices and moulds, moss and efflorescent salts and trading oil and greasy spot etc and applying two coats of white wash on these surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old decorated, plastered/unplastered or concrete surfaces on wall including cornices and moulds, moss and efflorescent salts and trading oil and greasy spot etc and applying two coats of white wash on these surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L applying three coats of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directred by Engineer-in-Charge.

M&L applying three coats of white wash on newly plastered surfaces on ceiling including preparation of surface, complete all as specified and directred by Engineer-in-Charge.

M&L for applying two coats of cement base paint over a coat of primer on newly plastered wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction including preparation of surface, complete all as specified

S&F factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in Preamble 8B.2.8 of SSR Part -II (2010) and all as shown on drawing on Sl Page No 160 of SSR Part-II (2010) complete all as specified and as directed by Engineer-in-Charge.

S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. Note - Wire gauze / glass to be measured and paid separately.

M & L for decorative laminate type I of surface finish 0.9mm thick, any colour and pattern as approved, fixed with adhesive as per manufacturer's instructions complete all as specified and directed.

Taking down boarding of any description as in cup board shutters, kitchen cabinet of any thickness complete all as specified.

S & F plywood 18mm thick grade BWR, type BB fixed with screws/nails to timber frame work and as in cupboard and cupboard shutter complete all as specified.

S & F stainless steel telescopic channels for drawers of kitchen cupboards any length complete all as specified and directed.

S & F stainless steel handles fancy type 100mm long for cupboard shutters complete all as specified and directed.

S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and as directed by Engineer-in-Charge.

S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aperture 1.4mm and fixed with tinned tacks to stainless steel wire stapple complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aperture 1.4mm and fixed with tinned tacks to stainless steel wire stapple complete all as specified and directed.

S & F 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F aluminium anodized handles cast type 125mm long complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M & L vitrified tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.8 Sqm but not exceeding 1.00 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

M & L vitrified tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as on vertical surfaces in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick plaster bedding layer in CM 1:4 including taking down old plaster complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified and directed.

M & L glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/450mm x 350 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 15mm thick plaster in CM 1:4 and including dismantling of old tiles/terrazzo finish etc; complete all as specified and directed.

M&L for prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in wall, fixed with slef tapping screws all as specified including dismantling old AC sheets of any description complete all as specified and directed.

S & F Pre-painted galvatume aluminium zinc coaring GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of old sheet.

Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in bedding, benching of manholes, copings, roof padding/kerbs & surface channel etc. complete all as specified and directed.

M & L for 40mm thick ( measured solid) precast cement concrete louvers and jallies, type B0 using 12.5mm graded stone aggregate including all mouldings etc., set in CM 1:6, complete all as specified and directed.

S&F aluminium glazed and wire gauged door with frame of size 100 x33x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass/stainless steel wire cloth, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed by Engineer-in-Charge. Note:- Sheet glass and stainless steel wire cloth shall be measured and paid separately under respective item.

Three track aluminium powder coated sliding window using two tracks for glazed window shutter and one track for wire gauged shutter including provision of necessary rubber gasket for fixing glass panes/wire mesh etc complete all as shown in drawing No. CE BT/SK-936 sheet 1/1 available in AGE B/R-I office, all as specified and directed by Engineer-in-Charge. Note:- Sheet glass and stainless steel wire cloth shall be measured and paid separately under respective item.

Aluminium powder coated vents including provision of necessary rubber gasket for fixing glass panes etc complete all as shown in drawing No. CEBT/SK-936 sheet 1/1 available in AGE B/R-I office, all as specified and directed by Engineer-in-Charge. Note:- Sheet glass shall be measured and paid separately under respective item.

M & L 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

M & L machine pressed precast concrete coloured interlocking paver block any shape, size and pattern, IS - 15658-2006 (Marked) of 60 mm thickness of M-35 grade with grey cement & pigment including 25mm thick sand cushioning complete all as specified and diretced.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance not exceeding 50m and making good surface all as specified and directed by Engineer - in - Charge.

Material and Labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate for foundations, fillings and mass concrete, for sub base under floors etc complete all as specified and directed by Engineer – in - Charge.

Material and Labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long and dia of shank 5 to 10mm complete all as specified and directed by Engineer-in-charge

Supply and fixing mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/losse soil & getting out complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, not exceeding 1.5 m wide and exceeding 1.5m depth but not exceeding 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/losse soil & getting out complete all as specified and directed by Engineer-in-Charge.

Excavation over areas, not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Excavation over areas, exceeding 1.5 m deep and not exceeding 3.0 m deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Excavation over areas, exceeding 3.0m deep and not exceeding 4.5m deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation fiiling & mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor, under tiles etc. complete all as specified and as directed by Engineer-in-charge.

Material and labour for hard core of broken bricks of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified & directed by Engineer-in- charge.

Material and labour for loose filling with broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 50mm thick PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including dismantling of old ms work complete all as specified and directed by Engineer-in-Charge.

M & L for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in kerb stone, manhole covers, kitchen sink slab etc with plain fair faces including chamfers, eatherings,throating etc. and setting in mortar set in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Rough excavation not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed by Engineer – in - Charge.

Returning, filling in soft / loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing surplus excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.

M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including M&L for 15 mm thick screed in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed by Engineer-in-Charge. Note:- Sample of granite fornShade and type shall be approved by GE before procurement

Rounding of/moulding to edges half round of stone of any description including rubbing and polishing (Granite finish) complete all as specified and directed.

Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall etc having thickness not more than 250mm by electric drilling machine and making good complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of (SGSW) drain pipes of 150 mm dia, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be equal to outer dia of drain pipes (not of sockets / collar)

Supply and fixing Salt-glazed stoneware drain pipes 150mm bore of grade 'A' laid in trenches and jointed etc. complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of any description on old plastered wall surface of any description, preparing the surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/ Mechanised sander etc prepatory to paint. (b) Two coats of acrylic emulsion distemper over a coat of acrylic emulsion internal primer by using Airless spray / Roller over complete all as specified and directed. Note:-Contractor may use manual scraping tools for complete removal and surface prepration with prior written approval of Engr-in-Charge in case of using of Mechanical equipment are not possible.

Preparation of newly plastered wall surface of any description, preparing the surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/ Mechanised sander etc prepatory to paint. (b) Two coats of acrylic emulsion distemper over a coat of acrylic emulsion internal primer by using Airless spray / Roller over complete all as specified and directed. Note:-Contractor may use manual scraping tools for surface prepration with prior written approval of Engr-in-Charge in case of using of Mechanical equipment are not possible.

Complete removal of existing treatment of any description on old plastered wall surface of any description, preparing the surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/ Mechanised sander etc prepatory to paint. (b) Two coats of exterior acrylic emulsion distemper over a coat of acrylic emulsion external primer by using Airless spray / Roller over complete all as specified and directed. Note:-Contractor may use manual scraping tools for complete removal and surface prepration with prior written approval of Engr-in-Charge in case of using of Mechanical equipment are not possible.

Preparation of newly plastered wall surface of any description, preparing the surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/ Mechanised sander etc prepatory to paint. (b) Two coats of exterior acrylic emulsion distemper over a coat of acrylic emulsion external primer by using Airless spray / Roller over complete all as specified and directed. Note:-Contractor may use manual scraping tools for surface prepration with prior written approval of Engr-in-Charge in case of using of Mechanical equipment are not possible.

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, etc and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sqmm single core in and through PVC conduit 20mm dia mideum duty ISI marked including fixing condute on the wall/Floor/ceiling/truss in open type/concealed type with suitable clamps, nut, bolts etc as the situation demand, including suitable new steel sunken box, semi modular frame and cover plate for fixing of semimodular switchs as per required in that board, flush to surface for one light point, fan point controlled by one switch on the same board with other switch or independent including 1.5 Sqmm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including chases cutting making good disturbed surfaces in CM 1:3 complete all as specified and directed by Engineer-in-Charge. Note :- Switchs, socket,etc shall be measured and paid for separately under appropriate items of Schedule 'A'/BOQ.

All as per item No 171 here in before but for socket outlet 5 pin, 6 Amp on same board complete all as specified.

All as per item No 171 here in before but for socket outlet 5 pin, 6 Amp on independent board but not below the switch board complete all as specified .

All as per item No 171 here in before but for socket outlet 3 pin, 15 Amp on independent board but not below the switch board with 2.5sqm PVC copper conductor FRLSH cable and 2.5 sqm PVC insulated copper conductor FRLSH cable as earth continuty conductor complete all as specified and as directed by Engineer-in-Charge.

All as per item No 171 here in before but for call bell point complete all as specified and as directed by Engineer-in-Charge.

All as per item No 171 here in before but one light point controlled by two ways complete all as specified and directed by Engineer-in-Charge.

Supply and fixing semi modular switch piano, flush type, one way, 5 Amps 230 Volts (ISI marked) with switch frame on laminated sheet top cover complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing semi modular switch piano, flush type, two way, 5 Amps 230 Volts (ISI marked) with switch frame on laminated sheet top cover complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing semi modular one switch and one socket 5 pin 5 Amps, 230 Volts AC including cover plate complete all as specified and as directed by Engineer-in-Charge. Note:- Switch and socket shall be of the same make.

Supply and fixing semi modular one switch and one socket 5 pin 15 Amps, 230 Volts AC including cover plate complete all as specified and as directed by Engineer-in-Charge. Note:- Switch and socket shall be of the same make.

Supply and fixing semi modular type regulator for ceiling fan electronic step type suitable for 1200/1400 ceiling fan complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing semi modular switch Bell push, 5/6 Amps, 230 Volts AC including cover plate complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing call bell Ding-dong, 230 Volts AC supply complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose 3 plate, surface type bakelite, 6 Amps, 250 Volts AC topline series with polycarbonate, 20x50 mm, two to three terminal (ISI marked) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing sheet metal enclousers double door made out of CRCA mild steel sheet, flush mounted, powder coated, IP 43 with metal door, 4 way, DB TPN, 415 Volts AC with 200 Amp rated bus bar, 8 modules, dust and vermin proof suitable for fixing MCB's and isolators etc complete all as specified and as directed by Engineer-in-Charge.

S & F MCB, TPN, 63 Amps, 'C' curve , 415 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair MCB, SP, 6 to 40 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB, SPN, 40 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB, SPN, 63 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volt complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing sub main wiring with 2 single core cable multi-stranded PVC insulated FRLSH cable unsheathed 1100 volts grade with copper conductor of size 4 sq mm drawn in and including 20mm dia PVC concealed conduit including tee, elbow, bend etc, cutting of chases in wall / ceiling including earth continuity conductor cable of size 4 sq mm PVC insulated unsheathed copper conductor cable connected to common earth and earth dolly complete all as specified and as directed by Engineer-in-Charge. Note : Three length of 4sqmm cable will be measured as one length for payment

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (PCC 1:2:4 B-1 using 20 mm graded stone aggregates for concrete pit including 10 mm thick PCC slab cover frame) depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point, all as specified as shown in electrical plate No 3 SSR Part-I and testing on completion complete all as specified and as directed by Engineer-in-Charge. Note :- PCC chamber shall be constructed at least 1.5 m away from earth pit pipe for watering shall be provided in slanting manner.

Supply and fixing in replacement lamp holder angle/straight, including LED bulb 9W polycarbonate cased body with back plate suitable for batten fittings for landing T & wind shock complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing single phase, 50 hz, 230 volt ceiling fan of size 1200 mm sweep having BEE 5 star rating including proper arrangment in ceiling for hanging fan such as hanging rod, hook including making connection and providing twin core round copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing single phase, 50 hz, 230 volt ceiling fan of size 1400 mm sweep having BEE 5 star rating including proper arrangment in ceiling for hanging fan such as hanging rod, hook including making connection and providing twin core round copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing single phase, 50 hz, 230 volt wall mounting fan of size 400 mm sweep having BEE 5 star rating including proper arrangment for wall mounting fan such as mounting pad/hook including making connection and providing twin core round copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing single phase, 50 hz, 230 volt exhaust fan of size 300 mm sweep( metal body) having BEE 5 star rating including making opening in wall for fixing exhaust fan and making good the existing surface including making connection and providing 3 core copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing energy efficient LED street light fitting of 45 Watt epoxy powder coated pressure die cast aluminium housing to act as heat sink for efficient dissipation of heat and toughened glass with IP 66 degree of protection, system luminous efficency more than 100 lumens / watt individual LED's should have lenses for better throw across and along road, PF>0.9 with voltage range 140 to 270 Volt, fitting should be provided wih inbuilt 10 KV minimum surge protection, short circuit and over voltage protection facility for Driver and fiiting including making electrical connection includig GI bracket (01 No) MS clamps (02 Nos) suitable for security light fitting fixing to wall / column & electrical connection to the light fitting providing 1.5 mtr long twin core round copper conductor cable of suitable size and testing complete all as specified and directed by Engr-in-Charge. Make:-Wipro cat part No. LR02-501-XXX-57-G1 or equivalent model of any make given in Appendix 'B' of tender documents, Cat Part No. as approved by GE.

S & F 15mm bore fancy type chromium plated brass bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete.

S & F electrical operated single phase, water storage heater(Geyser), vertical type of capacity 25 Ltr complete having vitreous enamel coated tank, single weld line tank made of ultra thick, superior cold rolled steel and inlet/outlet provision and safety device, five star rating etc alongwith 3 core copper cable of recommended size including PVC connection of 15mm bore of length with brass nuts ( hot and cold water) complete including grouting of fastners in wall for fixing geyser and making good to disturbed tiles/plaster of the bathroom complete all as specified and directed.

Supply and fixing 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS16106/IS16107, minimum 6000K batten decorative type 4 feet long alminium extruded, white , in built LED driver, power factor >0.95, including 18/20 watt tube rod connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. Make:- Compton cat part No. DMLN1LT8-16( for batten) and Cat Part No. LTT8-20 (for tube rod) or equivalent model of any make given in Appendix 'B' of tender documents as approved by GE.

Supply and fixing LED mirror light of 07 watt, 6000K, linear & compact with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete including 07 watt tube rod including connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. Make:-Crompton Cat part No. LCL-7-CDL or equivalent model of any make given in Appendix 'B' of tender documents, Cat Part No. as approved by GE.

S & F energy efficient LED street light of 25 Watt with PDC aluminium body and clear glass with lens for wide beam distribution, top maintainable type with IP 66 degree of protection, PF>0.95 with voltage range 140 to 170 Volt, fitting should be provided with inbuilt 5KV minimum surge protection, short circuit and over voltage protection facility for driver and fitting including 25 watt LED lamp with GI bracket-01 No, MS clamp-02 Nos suitable for walls/columns metre long twin core round copper conductor cable of 1.50 metre long twin core round copper conductor cable of suitable size and testing complete all as per SYSKA cat part No. SSK-SLF-CF-25W-WL or equivalent model of any make given in Appendix 'B' of tender documents, Cat Part No. as approved by GE.

S & F surface mounted, decorative round bulk head luminaire comprising of high brightness LED lamp 10/12 Watt, 6000K polycarbonate including all other accessories and fitting arrangement including electric connection connecting with using flexible copper wire twin core upto ceiling rose/conector.Make:- Crompon cat part No. LBHE-10-CDL or equivalent model of any make given in Appendix 'B' of tender documents,Cat Part No. as approved by GE.

S & F wall mounted/surface mounted, decorative wall light fixture SS finish fixture with opal glass diffusersuitable for 9watt TU retrofit CFL and including LED lamp of 9 watt B22 base complete fitting and all other accessories including electric connection connecting with using flexible copper wire twin core . Make:- Havells Cat Part No. LHJC02108499 or equivalent model of any make given in Appendix 'B' of tender documents, Cat Part No. as approved by GE. Note:- The rate of LED lamp of 7 watt B22 base is deemed to be included in the quoted rate.Nothing extra shall be paid on this account.

S & F surface mounted, LED ceiling light 230 Volt, 12 watt complete fitting and all other accessories including electric connection connecting with using flexible copper wire twin core . Make:- Crompon cat part No. LCSR-12-CDL or equivalent model of any make given in Appendix 'B' of tender documents, Cat Part No. as approved by GE.

K L JINDAL AND CO.

M/s HANS BROTHERS

BALAJI CONSTRUCTIONS

M/s MITTAL CONSTRUCTIONS

FAIR DEAL CONSTRUCTION CO

M/S BHAGWATI CONSTRUCTION COMPANY

MS VIKAS ENTERPRISES

SUBHASH ARORA CONSTRUCTION CO