REPAIR / MAINT TO INTERNAL ELECTRIFICATION SYSTEM OF SMQs, MARRIED ACCN AND OTM ACCN UNDER GE (AF) BAMRAULI

Amount

Attending complaint and rectifying any type of fault in internal electrification such as decarbonising connection in the DBs checking for disconnections any burning due to over loading in DBs and restoring electric supply,checking and repair of switch sockets, MCBs any type, repair of tube light fitting, any type, by replacement of worn out ballast, bipin holder, starter, worn out wire, repair of faulty fan by disconnecting and replacement of worn out part such as capacitor, fan regulator, worn outwire, repair of lamp by replacement of worn out holder wire, earthing, repair replacement of electric bell/buzer/bell push and other internal accessories i.e. switch socket etc. which needs to serviceable the electric supply. Note :- (i). Contractor shall be provided necessary T&P such as ladder, Earth, tester, Insulation tester, drill machine during rectification fault and nothing extra shall be paid to him on this account (ii). The cost of insulation tape shall be deemed to be included in the unit rate quoted against relevant item (iii) Complaint will be attended immediately as and when noted day and night

(a) Description all as above in item No-1 here-in-before but location South Camp complete as specified and directed by Engr-in-Charge.

(b) Description all as above in item No-1 here-in-before but location 4 AFSR complete as specified and directed by Engr-in-Charge.

(c) Description all as above in item No-1 here-in-before but location Billets complete as specified and directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete as specified and directed by Engr-in-Charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item 3 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC casing caping mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No. 5 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.

Supply and fix in repair Switch piano 6 amps, single pole, one way, 230 volts complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Switch piano 16 amps, single pole, one way 230 volts complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Socket outlet 6 Amp 2pin & 3 pin, flush type complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Socket out let, 16 amp and 6 amp, flush type complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Electronic fan regulator 5 step 230 volts,switch type complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Electronic fan regulator 5 step 230 volts, socket size complete as specified and directed by Engr-in-Charge.

Supply and fix in replacement Switch socket combination 2 IN 1 3 PIN 6/16 Amp 220 Volt flush type complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Lamp holder, insulated body, with back plate 230 Volt suitable for batten fittings complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Capacitor 230 volt, 1 Mfd all as specified and directed by Engr-in-Charge.

Supply and fix in repair Capacitor 230 volt, 2.5 Mfd for ceiling fans complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Capacitor 230 volt, 3.15 Mfd for ceiling fans complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Switch modular type, 230 volts, single pole, one way, 10 Amp, one module complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Switch modular type, 230 volts, single pole, one way, 16 Amp one module complete as specified and directed by Engr-in-Charge.

Supply and fix in repair Socket out let 5 pin, 10 Amp, 230 volts modular type complete all as specified and directed.

Supply and fix in repair Socket out let 5 pin, 10 amp & 20 amp, 230 volts modular type complete all as specified and directed.

S&F in repair Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

S & F ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type complete all as specified and as directed.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 3 pin, 6 Amp box type complete all as specified and as directed.

Supply and fix in replacement calling bell ding dong type 220 volt 50 Htz complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2200 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix in repair 2x2 LED fitting recess mounting flate panel 36 watt, down light 240 volt 50 Htz 150 luumen/watt comprising driver locking arrangement prewired completely.

Supply and fix in replacement 18 Watt LED tube 4 pin type ultra bright LED PL-L with high efficacy suited for installation in existing 2G11 lamp holder complete all as specified and directed.

Supply and fix wall mounted decorative fancy type bedroom light LED type with frosted glass mounted on metalic frame with holder including 12 watt LED bulb complete all as specified and directed.

S & F bed side lamp LED 3 Watt all as specified and directed by Engr in Charge. Make Philipis Model No 48042/30/3 or equivalent particular specification.

Supply and fixing in replacement of Recess mounted complact vertical round shaped down light LED 5 watt suitable for low ceiling height complete all as specified and directed.

Supply and fixing in replacement of Recess mounted complact vertical round shaped down light LED 2 watt suitable for low ceiling height complete all as specified and directed.

S & F in replacement surface mounted, suare LED down light fitting12 watts with die cast aluminium housing and system wattage of 12W, including connecting up with PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S&F in replacement PVC cable copper conductor multi strandrad flexible 23/76 twin core and making connections from ceiling rose to fan complete all as specified and directed.

Supply and fix in replacement 1.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 2.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 4.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 6.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in repair PVC gang box ISI marked three module for mounting one 5 amp socket & switch complete all as specified and directed.

Supply and fix in repair PVC gang box ISI marked fourmodule for mounting one 15 amp socket & switch complete all as specified and directed.

Supply and fix in repair PVC gang box ISI marked six module for mounting two 5 amp socket & two switch complete all as specified and directed.

Supply and fix in repair PVC gang box ISI marked 9 module for mounting three 5 amp socket & three switch complete all as specified and directed.

Supply and fix in replacement white cover plate with frame three module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame six module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame twelve module for modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box three module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box six module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box twelve module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply only hylum sheets 3 mm thick (ISI marked) 8" x 10" incl cuttings for switches and sockets 6/16Amps complete all as specified and directed.

Supply only hylum sheets 3 mm thick (ISI marked) 10" x 12" incl cuttings for switches and sockets 6/16Amps complete all as specified and directed.

S & F terminal box of 1.6 mm thick suitble size for fixing 3 mm thick hylam sheet complete all as specified and directed.

Supply and fix bulkhead fitting enviornmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire comprising of highbrightness LEDs of 10 watt complete all as specified and directed.

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply anf fix Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 12 ways, 240 volts, Make Legrand/Hager/siemense Note : MCBs shall be measured and paid for separately under respective item of this schedule.

Supply anf fix Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 8 ways, 240 volts, complete all as specified and directed.

S&F factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified and confirming to IS : 8623 complete all as specified and directed.

Supply and fix MCCB, four pole, 415 Volt ,125 Amp rating, 10 KA ultimate breaking capacity fixed in DBs catered herein before complete all as specified and directed.

Supply and fix MCCB, four pole, 415 Volt ,100 Amp rating, 10 KA ultimate breaking capacity fixed in DBs catered herein before complete all as specified and directed.

Supply and fix MCB, tripple pole and neutral, 415 volts, 32 to 63 Amps rating, 10KA, "C" series fixed in DBs catered herein before complete all as specified and directed.

Supply and fix in replacement MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before complete all as specified and directed.

Supply and fix in replacement MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs catered herein before complete all as specified and directed.

Supply and fix MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, 'C' series fixed in DBs catered here-in-before complete all as specified and directed.

Supply and fix connecting and testing LED street light 30 watt 6000k new generation energy saving and enviornmental friendly long life versatile pressure die cast aluminium housing IP-66 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting complete all as specified and directed.

Supply and fixing in repair Exhaust fan 300/308 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers and for fixing of Exhaust fan and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge .

Supply and fixing in repair Exhaust fan 230 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers and for fixing of Exhaust fan and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge

S&F in repair Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply suitable for 250/200 mm size Fresh air fan as per sample complete all as spd and directed.

Supply only exhaust fan motor capacity 1/4 HP 230 volts suitable for 230/300 mm size exhaust fan complete all as directed.

Supply only single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply only 12 W LED Bulbs warm white , high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz, complete all as specified and directed.

Supply only 9 W LED Bulbs warm white , high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz, complete all as specified and directed.

Supply and fixing in repair ventilating Fan 150 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fixing in repair ventilating Fan 200 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fixing in repair Ventilating Fan 250 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fix in repair wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed.

M & L for in replacement for only twin core PVC insulated unarmoured cable 4 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor all as specified and directed by Engr-in-Charge.

M & L for in replacement for only twin core PVC insulated unarmoured cable 6 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor all as specified and directed by Engr-in-Charge.

Supply and fixing Pedestal fan 450mm sweep 1400 RPM, 100 watt , air delivery 115CMM double bearing one year warranty complete all as specified and directed by Engineer -in-Charge.

M & L for tape roll all as specified and directed by Engr-in-charge.

Supply and fix LED Tube rod fittings 4 feet long single side connection complete all as specified and directed.

S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x12 watt LED bulb B22 base complete all as specified and directed by Engineer in charge .

M&L for Preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

All as per item No - 84 above but one coat of Oil bound distemper on ceiling surface (Note ceiling surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M& L for Complete removal of existing finishes on wall and applying two coats of oil bound distemper over a 1.5 mm thick wall care putty including chalk whitning (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling surface and applying two coats of oil bound distemper over a 1.5 mm thick wall care putty (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint (Appx exterior emulsion paint) having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

Preparation of old plaster surface of wall applying one coats of Appx exterior emulsion paint (Asain paint) on wall surfaces Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M& L for Complete removal of existing finishes on wall and applying two coats of cement base paint over a coat of primer on wall including balance area (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enammel paint with spray painting machine complete all as specified and directed.

All as per Item No-92 above but on steel surfaces

M&L for Complete removal of existing finishes on wall and applying two coats of plastic enannel paint over a coat of primer including chalk whitning with spray painting machine (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed

M&L for preparing new plaster surfaces of ceiling and applying two coats of oil bound distemper over coat of primer(Note ceiling surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M&L for preparing of new plaster surfaces of walls and applying two coats of oil bound distemper over one coat of primer (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M&L for Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer including balance area (Note wall surface made smooth and application of paint through mechanical means) complete all as specified and directed.

M&L for complete removal of existing surface of wall and applying a Dark black colour of exterior emulsion paint over a coat of primer with 1.5mm thick wall care putty for a dimension of 30x30cm with letter inscribe DARK WHITE with font size of 8inches complete all as specified and directed.

Taking down shutter exc 1.5sqm but not exc 4 sqm each removing from site complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sqm each (without taking off shutters from the frames) & removing from site complete all as specified and directed

S&F steel window with side hung shutter (mosquito proof ) with box type hinge, steel peg stay, lugs, handles, without glazing bars complete including one shop coat of red oxide primer.

S&F steel window with side hung shutter ( glazed) including box type hinges, steel handle, peg stay lugs complete with glazing bars and painted with one soap coat of red oxide primer.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F Second class hardwood Flush shutters 35mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm PVC sheet reinforced with MS square tube all as specified and directed including making good to the surfaces.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F MS flat iron as in hold fast etc and similar work incuding making shape, drilling holes etc, confriming to FE 290 Ged E-165

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S & F in repair 4mm thick Figured glass, pin head type in squares in n exc 0.5 sq.m in each pane complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame complete all as specified and directed

S&F in repair 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as spesified and directed.

S&F in repair 300 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed .

S&F in repair 250 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed.

S & F in repair 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised.complete all as spesified and directed.

S & F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded section.complete all as spesified and directed .

S&F in repair for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spesified and directed.

S&Fin repair for 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as spesified and directed.

S&F of rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

bharat construction

HIMANSHU TRADERS

oasis contractor builder and supplier

R K CONSTRUCTION COMPANY

Toshi Enterprises

M/S V K MEHROTRA

M.R. ENTERPRISES