Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹35.1 L+₹3.6 L (11.6%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹36.0 L+₹4.5 L (14.5%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹36.3 L+₹4.8 L (15.3%)Rejected-Finance 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹36.8 L+₹5.4 L (17.1%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
17 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE (WEST) LUCKNOW PIN 226002 C/O 56 APO
ADDN AND ALTN CUM SPL REPAIR TO BLDG NO 2A 3A AND 4A AT GAUR ENCLAVE AND BLDG NO 10-I AT DILKUSHA UNDER GE (WEST) LUCKNOW
2023_MES_591470_1
GE/W/LKO/09 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE WEST LUCKNOW
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹85,000
15 Jul 2023
26 Apr 2023
19 May 2023
26 Apr 2023
17 May 2023
10 May 2023
26 Apr 2023 - 3 May 2023
Amount
M & L for Brickwork with fly ash bricks(Old size), straight or curved on plan exc 6m mean radius, built in in CM 1:6 including demolition of old brick work complete all as specified and directed.
M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.
Taking down cement plaster from brick wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
Material and labour for 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in CM (1:4) on brick work including using integral water proofing compound finished the surface even and fair complete all as specified and directed. NOTE- WPC shall be measured & paid separetly under respective item.
Supply only integral water proofing coumpound conforming to IS 2645 complete all as specified and directed.
Material and labour for 5mm thick rendering in CM (1:3 ) on ceiling surfaces finished even and smooth complete all as specified and directed.
M & L for (Premium quality) Non skid coloured ceramic tiles 7-8mm thick area of each tile exc 0.06 sqm but n. exc 0.11 sqm in floors including 15mm thick screed bed or bedding layer of mortar with CM 1:6 set and including dismantling of old tile and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Material and Labour for coloured glazed ceramic tiles 300 x 600 x 6-7 mm thick on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM (1:4) including setting with cement paste and pointing with coloured/white cemente to match the tiles including dismantling of old tile complete all as specified and directed.
M & L for (Ist quality) light shade double charged vitrified tiles 8-10mm thick, light shade, square polished, area of each tiles n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 including dismantling of old tile complete all as specified and directed.
M & L for (Ist quality) light shade double charged vitrified tiles 8-10mm thick, light shade, as in skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles including 10mm thick backing coat in CM 1:4 including dismantling of old tile complete all as specified and directed.
M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght, bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges and including dismantling of old granite slab complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed.
Drilling through holes in granite stone for pipes etc not exc. 25 mm dia complete all as specified and directed.
Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Material and labour for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed.
Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Material and labour for GI tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed.
Material and labour for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed.
Taking down rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
Supply and fixing in repair 100 mm dia cast iron sand cast soil, waste and vent pipes in any length with or without ears with cement joints , fixed to walls complete all as specified and directed.
Supply and fixing in repair 75 mm dia cast iron sand cast soil, waste and vent pipes in any length with or without ears with cement joints , fixed to walls complete all as specified and directed.
S & F PVC (SWR) Pipes 110mm bore single socketed in any length with rubber ring joints , fixed on walls trenches or in floors complete all as specified and directed.
S & F PVC (SWR) bends any radius 110mm size complete all as specified and directed.
S & F in repair 100 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or without ears complete all as specified and directed.
S & F in repair 100 mm dia plain bends CI sand cast soil waste and vent pipes in length with or without ears with cement joints fixed to wall complete all as specified and directed.
S & F in repair 75 mm dia plain bends CI sand cast with or without ears with cement joints fixed to wall complete all as specified and directed.
S & F in repair 100 mm dia Nahani trap to waste pipe fixed in cement concrete complete all as specified and directed.
S & F in repair 75 mm dia Nahani trap to waste pipe fixed in cement concrete complete all as specified and directed.
Supply and fixed in repairs vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling,and 32mm dia PVC waste pipe, complete all as specified and directed.
S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe etc complete all as specified and directed.
Supply and Fixing in repair vitreous china squatting pan, Orissa pattern, long pan size 580 x 440mm with 'P' or 'S' trap with integral foot rest & fixing incl making good floor to match complete all as specified and directed.
S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed.
S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer complete all as specified and directed.
S & F in repair for 15mm bore CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- Jaquar CAT PART NO KUP35051BPM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F in repair Single lever Wall mixer 3 in 1 system with provision of both hand shower and over head shower complete with 115mm long bend pipe on upper side connecting legs and wall flanges (without hand and over head shower) including all fittings and fixed complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35117PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F in repair for 15mm bore CP single lever Sink mixer for Kitchen sink mixer without popup waste system with 450mm long braided hoses complete all as specified and directed.
S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed. Make :- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35037PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F in repair CP brass stop/angle valves 15mm bore fancy type chromium plated with quarter turn handle and wall flange complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35053PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F in repair Overhead shower 200 x 200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 450mm long including all fittings and fixed complete all as specified and directed. Make:- JAQUAR CAT PART No. OHS-35497 & SHA 49483 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall complete all as specified and directed.
S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in repair health faucet (hand shower) with 1 mtr flexible tube with hot and cold water supply wall hook, bracket etc complete set of superior quality complete all as specified and directed. Make: JAQUAR CAT PART No. ALD-565 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F in repair for fancy type brass chromium plated toilet paper holder with flap including all fittings and fixed complete all as specified and directed. Make:- JAQUAR CAT PART No. AKP-35773PS or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F in repair CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality complete all as specified and directed. Make : Jagur Cat No 7711 or equivalent of Marc/ESS-ESS all as specified and directed.
S & F in repair PVC coloured bath cabinet, overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed.
S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete all as specified and directed. Make: JAQUAR CAT PART No. CAN 1171N or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F in repair Glass corner self, fancy type, 250x250 and 8-10mm thick fixed with brass bracket and screwed complete all as specified and directed. Make: JAQUAR CAT PART No. CAN 1173 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S & F 300mm long Stainless steel six peg hanger chromium plated as approved by engr-in-charge complete all as specified and directed.
S & F in repair sink with drainage board size 1145x510 mm,bowl size 560x410x200 mm made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc including bedding including cement mortar, dwarf wall or cantilever brackets and connection union to pipe complete all as specified and directed.
S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 900x750 mm including screws and wt not less than 5.00 Kg complete all as directed.
S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position of capacity 500 ltrs including dismantling of old tank complete all as specified and directed.
S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position of capacity 1000 ltrs including dismantling of old tank complete all as specified and directed.
S & F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
Taking down & refixing shutters of any description exc 1sqm and n exc 2 Sqm in the same opening complete all as specified and directed.
Taking down shutter only of any description exc 1 sqm and n. exc 2 sqm each and removing complete all as specified and directed.
Material and labour for Cutting holes exc half brick but n.exc one brick in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
S & F 30mm thick flush shutter factory made, solid core construction with block board core and ply wood panels of commercial type on both side complete all as specified and directed.
S & F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded all as specified under 8.20(a) of SSR Pt-I complete all as specified and directed.
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.
S & F 75 x 50mm single rebated factory made, 100% solid WPC (wood polymer composite) Paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cum complete all as specified and directed. (a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity. (b) Rate for this item includes material and labour for fixing of frame with minimum 06 nos of hold fasts / dash through bolts of suitable size as directed.
S & F 28mm thick factory made 100% solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company complete all as specified and directed.
S & F 19mm thick factory made 100% solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company complete all as specified and directed.
S & F 200mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and directed.
S & F Mild steel Butt hinges "medium weight" cold rolled mild steel 100mm size complete all as specified and directed.
S & F alumunium handle fabricated type anodised 150mm long complete all as specified and directed.
S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.
S & F 19 mm thick BWR plywood interior grade both side with comercial face fixed with screwed to timber frame work edge chamfered as directed by Engineer-in-Charge complete all as specified and directed.
S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas directed by Engineer-in-Charge complete all as specified and directed.
S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed by Engineer-in-Charge.
S & F Auto concealed Hinges SS size 103mm64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed.
S & F 100mm size aluminium handle fabricated type anodised complete all as specified and directed.
S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F heavy duty CP mild steel hanging rod 18 mm dia with end brackets and fixed with screw complete all as specified and as directed.
S & F fancy type stainless steel curtain rods of 25mm dia of approved shade including bracket/joictions/wall to wall as approved by Engineer-in-Charge as specified and directed..
S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.
S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.
S & F 300mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed.
Material and labour for prepration of newly plastered wall surface and applying three coats of white wash complete all as specified and directed.
Material and labour for one coat of white wash on old treated wall surface incl prepration of surface complete all as specified and directed.
Material and labour for preparation of new/old plastered surface of walls by washing rubbing and applying two coat of plastic emulsion over and incl one coats of 1mm thick birla wall care putty complete all as specified and directed.
Material and labour for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.
Material and labour for preparation of old plastered ceiling surface and applying two coats of white wash complete all as specified and directed.
Material and labour for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of old wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of Old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Demolition of Cement Concrete Reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L for 75 mm thick cement concrete type C1(1:3:6) using 20mm graded stone aggrtegate as in plinth protection including finsihing even & fair complete all as specified directed.
M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directed.
Demolition of Cement Concrete (Unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated soil n exc. 250m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M & L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.
M & L for 40 mm thick Cement concrete 1:2:4 type B-0 using 12.5mm gradred stone aggregate as in Damp proof course to horizontal or vertical surfaces with using water proofing compound including necessary formwork complete all as specified and directed.
M & L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels bands, shelves complete all as specified and directed.
M & L for Reinforced cement concrete 1:1.5:3 type A-1 using 20 mm graded stone aggregate as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsall complete all as specified and directed.
M & L for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, lintel, floor slabs, landings and similar work (Horizontal or sloping) complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finshed surface of concrete complete all as specified and directed.
S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M & L for hard core of broken stone or boulder of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete including filling interstices with approved fine material like earth or grit etc complete all as specified and directed.
M&L for sand filling under floors as in coushoning for interlocking paver blocks complete all as specified and directed.
M & L for factory made machine pressed precast 60mm thick PCC inter locking paver blocks M-35 grade of any shape and size confirming to IS-15658-2006 as in hard standing with grey cement and pigment complete all as specified and directed:
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in haunching, kerb/fillets including necessary excavation earth work acomplete all as specified and directed.
Excavation in post holes in (or similar holes) each n.exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken bubble mixed with earth arround in layers n.exc 25 cm thick and removal of surplus soil complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-2 (40mm graded) stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
S&F for MS steel work as in rectangular purlins, rafters and similar item complete including cutting, griding, welding etc as required (F290 Gde E-165) complete all as specified and directed.
S&F rolled mild steel in joist, channel, angle or tee sections, circular tubes fixed independently as in post, pillars stanchions etc (FE-290 Gde E165) complete including cutting grinding welding etc as required complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.
M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting including Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Primer and emmulsion to be carried out through air less spray machin ( Mechanical means) complete all as specified and directed.
Dismantling Asbestos cement (corrugated or semi corrugated sheets etc) in roof covering complete all as specified and directed.
M & L for PCC 1:3:6, type C2 (40mm graded stone aggregate) as foundation, filling and mass concrete all as specified and directed.
Dismantling timber scantling from unframed work 40 sqcm and over in section in any position complete all as specified.and directed.
Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors FE-410W (Gde E-250) quality A complete all as specified and directed
Material and Labour for preparation newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M & L for 300x300x10-12mm thick Exterior grade cement concrete tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
S & F in repairs cast copper alloy bib taps chromium plated 15mm bore pipe with captain head complete all as specified and directed.
S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.
Supply and Fixing in repairs PVC connection pipe 15mm bore, 600mm long complete all as specified and directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.
Supply and fixing aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and directed.
Supply and fixing butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and directed.
M&L for pre laminated coloured solid PVC wall panelling 5 mm thick with 40x6 mm PVC strip fixed to wall with necessary screws rawl plug etc as per manufacturer instructions complete all as specified and directed.
Taking down carefullycopper/aluminium point wiring (light, fan, bell, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.
M&L for point wiring with single core FRLS PVC insulated 1100V grade cable with multistranded copper conductor of size 1.5 Sq. mm (Nominal area) drawn in and including non metallic rigid PVC concealed conduit, medium grade ISI marked not less than 20 mm dia, concealed in wall, ceiling with saddles, screw & Plugs with all fittings including tee, junction boxes and drawing continuous earth wire of FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 sqmm and terminated in and including sunken box for modular switches/sockets, regulators etc complete all as specified and for one light/fan/exhaust fan/air circulator fan point controlled by one, one way Switch.
All as per Item No 130 above, but one socket outlet point 5 Amp on the same board with other switch complete all as specified and directed.
All as item no 130 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board complete all as specified and directed.
S&F modular switches 1 way 6A,1 module complete all as specified and directed.
S&F modular 6 A sockets-2/3 pin 2 module complete all as specified and directed.
S&F modular switches 1 way 16A,1 module complete all as specified and directed.
S&F modular 6A/16A sockets-3/5 pin combine 2 module complete all as specified and directed.
S&F Modular white cover plate with frame 4 module complete all as specified and directed.
S&F Modular white cover plate with frame 3 module complete all as specified and directed.
Supply and fix modular type blanking plates, one module complete all as specified and directed. Make: Anchor Roma/ Havells crabtree/Indoasian glint
S & F ceiling rose surface bakelight two to three terminal complete as directed
Supply and Fixing in repair wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.
S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and directed.
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.
S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs to operate on 230 volt AC, vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity including disconnecting and taking down old unserviceable Geyser and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed.
S&F MCB SP 6 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and directed.
S&F in replacement modular switches 1 way 6A,1 module, complete all as specified and directed.
S&F in replacement modular switches 1 way 16A,1 module, complete all as specified and directed.
S&F in replacement modular bell push ,1 module, complete all as specified and directed.
S&F in replacement modular 6 A sockets-2/3 pin combine 2 module, complete all as specified and directed.
S&F in replacement modular 6A/16A sockets-2/3 pin combine 2 module, complete all as specified and directed.
S&F in replacement fan step regulator modular, 2 module, complete all as specified and directed.
S&F in replacement modular white cover plate with frame ,2 module, complete all as specified and directed.
Same as item Ser No 152 herein before but 3 module, complete all as specified and directed.
Same as item Ser No 152 herein before but 4 module, complete all as specified and directed.
Same as item Ser No 152 herein before but 6 module, complete all as specified and directed.
Same as item Ser No 152 herein before but 8 module, complete all as specified and directed.
Supply and fix modular type blanking plates, one module complete all as specified and directed.
S&F modular tytpe plug and socket DBs with Single pole MCBs rated 32 Amps capacity including making niche in wall and mounted flush complete all as specified and directed.
Taking down carefully geyser of any type and refixing the serviceable geyser in its original or new location complete all as specified and directed.
Taking down carefully ceiling fan/exhaust fan of any size and type and refixing the serviceable fans in its original or new locationcomplete all as specified and directed.
m/s raghubar dayal
M/S Reliance Construction
M/S KAUSHIK CONSTRUCTION
Spectrum Enterprises
Rakesh Traders
M/s Sudhir Enterprises
QUALITY CONSTRUCTIONS CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .