Renovation of Inspection quarters by replacing Floor tiles of toilet toilet fittings and internal painting at Sanchar Colony Kolhapur

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Rey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.

New work (two or more coats) over and including water thinnable priming coat with cement primer.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer.

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:

Two or more coats on new work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :

One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

French spirit polishing :

One or more coats on old work.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder :

C.P. brass

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality :

15 mm diameter pipe.

20 mm diameter pipe.

25 mm diameter pipe

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.

a) With 2nd class teak wood beading of size upto 12 X 12 mm/ 25 mm X 25 mm

P/F 24 guage plain aluminium sheet over woooden door with brass or annealed MS screws or nails etc including removal of existing damaged aluminium sheet all complete as directed by engineer in charge.

Filling joints of glazed tile flooring/ceramic tile flooring with white cement with necessary pgment to match the shade of tiles. Before filling of joints the wall tiles shall be cleaned by Harpic/diluted hydrochloric acid and raking of joints shall be done properly and as per direction of Engineer-in-charge

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), model no. 250UFSM Bowl for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, Size: 380x655x765 mm, S Trap-250mm and LYS-WHT-38201 Cistern with cistern fittings for 38751P180UFSM & 38751S250UFSM of Jaquar or of equivalent specification, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Providing and fixing wash basin LYS-WHT-38801 Wall Hung Basin with Fixing Accessories, Size: 590x490x185 mm and LYS-WHT-38301 Full Pedestal For 38801of Jaquar or of equivalent specification,with C.I. brackets, 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever require :

Providing and fixing Soap Dish Holder, model no. ACN-1131N of Jaquar or of equivalent specification as approved by Engineer in Charge.

Providing and fixing Stainless Steel Single Towel Rail 600mm Long, model no ACN-1111SM of Jaquar or of equivalent specification as approved by Engineer in Charge.

Providing and fixing Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges, of model no CON-273KNUPRof Jaquar or of equivalent specification as approved by Engineer in Charge.

Providing and fixing Body Shower Wall Mounted 100X100mm Square Shape (ABS) with rubit cleaning system, model no BSH-1751 with necessary Shower Arm Casted 190mm Long Flat Shape for Wall Mounted Showers with Flange, model no SHA-483 of Jaquar or of equivalent specification as approved by Engineer in Charge.

Providing and fixing 2 Way Bib Cock with mpdel no CON-041KN of Jaquar or of equivalent specification as approved by Engineer in Charge.

Providing and fixing Angular Stop Cock with Wall Flange with mpdel no CON-059KN of Jaquar or of equivalent specification as approved by Engineer in Charge.

Providing and fixing Pillar Cock Long Neck with Aerator with mpdel no CON-021KN of Jaquar or of equivalent specification as approved by Engineer in Charge.

Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook, model no ALD-573 of Jaquar or of equivalent specification as approved by Engineer in Charge.

Dismantling of wash basin, WC pan, etc

Dismantlinf of bib cock, stop cock, wall mixure etc

Ujwal Tukaram Khorate