Loading…
Loading…
Tender Value
₹14.7 Cr
EMD Value
₹29.4 L
Closing Date
24 Aug 2026, 3:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
TENDER
13 conditions · 2 needing a document upload
Financial Eligibility Criteria: Shall be as per Para 10.2 of Advance Correction Slip No. 1 dtd 14-07-2022 of GCC April -2022.The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; whereV= Advertised value of the tender in crores of RupeesN= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.The tenderer shall submit requisite information as per Annexure - VIB, along with copies of Audited Balance Sheet duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria - Shall be as per Para 10.1 of GCC April - 2022.a)The tenderer must have successfully completed or substantially completedany of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, ORTwo similar works each costing not less than the amount equal to 40% of advertised value of the tender, OROne similar work each costing not less than the amount equal to 60% of advertised value of the tender.b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completedor substantially completedany of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, ORTwo similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, OROne similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than Rs. 2 crore each Notes pertain to Technical Eligibility Criteria Para-Note (1): As regards "Similar Nature of Work"- "Trenching, laying, jointing, splicing, testing and commissioning of optical fiber & 4/6 quad cable including installation of pig tails and termination box" OR"Trenching laying splicing, testing & commissioning of optical fiber cable including installation of pig tails and termination box".Note (2): Even though the work might have commenced before the qualifying period but completed successfully in qualified period will be considered.Note (3): In case of JV firms, either the JV firm or Lead Member of the JV firm must have successfully completed the "Similar Work" as mentioned in Para 6.1 above, during last seven years, ending last day of the month previous to one in which the tender is invited.
4 conditions · 2 needing a document upload
As per Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per Tender Document.
Supply, Trenching and Laying of 6 Quad cable along with associated accessories, Jointing, testing & commissioning of complete Quad cable system and laying of HDPE pipe, Blowing, Drawing of OF Cable, splicing and termination of OFC including Supply, installation, testing & commissioning of IP-MPLS network equipments, Telecom assets etc. for unified communication backbone of Indian Railways in connection with New BG line between Pachora - Jamner extension up to Bodwad (Malkapur) in Bhusawal Division of Central Railway
BSL-SnT-C-T-2026-27-03~CR
BSL-SnT-C-T-2026-27-03
Open
Works - General
11 Months
Jalgaon, Maharashtra
₹0
₹29.4 L
1 Aug 2026
1 Aug 2026
10 Aug 2026
405 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Above/ 102487868.58 Below/P | ||
| — | 3000.00 | — | — | ||
| Supply of GI pipe, inner dia. 100 mm dia. B-class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make. (Inspection by RITES) | — | — | — | 25,24,860 | |
| — | 54000.00 | — | — | ||
| supply of RCC pipe half round of size 150 mm dia outer and 100 mm dia internal 1mtr long matching to IS No. 458/2003 amendment - 1 with Rev. 4. or latest. (Inspection by RITES) | — | — | — | 94,59,720 | |
| — | 900.00 | — | — | ||
| Supply of DWC HDPE pipe with one snap fit coupler and "O" ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver. 1.1 with Amd. 1 or latest. (Inspection by RITES) | — | — | — | 2,40,246 | |
| — | 207.00 | — | — | ||
| Supply of HDPE Telecom duct 50mm dia solid permanently lubricted inner dia 42mm. & wall thickness 4mm. with end plugs, coupplers, cable sealing plugs and duct coller etc. to besupplied from TEC approved sources with allaccessaries. (Inspection by RITES) | — | — | — | 1,88,25,360.39 | |
| — | 2250.00 | — | — | ||
| Supply, Transportation and installation of concrete (RCC) route indicators at interval of 50 mts as per technical specification. They shold be of stadnderd RCC with letters one side "CR" and the other side" S&T CABLES" AS per DRG/BSL/CONST/TELE/RCC/CABLE ROUTE MARKER -01 & colour of paint will be RED for 6 Quad & Signalling ,Orange for OFC,Green for joint .Engraved letters should have a height of at least 4 inches (100 mm) or 2.8 inches ,Markers are engraved with identifying text such as "IR SIG," "IR/6 QUAD CABLE," or "OFC (Inspection by RITES) | — | — | — | 6,31,710 | |
| — | 60.00 | — | — | ||
| Maintanance free earth. As per RDSO /SPN/197/2008 or latest consisting of : (1) Copper bond steel electrode 3 mtr long 17 mm dia with copper bonding thickness of min. 250 micron & UL listed & marked - 01 No. (2) Earth enhancement compound RDSO Approved in sealed bag of 10 Kgs - 03 No (3) Copper strip 150X25X6 mm - 02 (4) Copper strip 300X25X6 mm - 01 (5) 35 Sqmm Copper Cable to connect earth electrode to MEEB - 15 Mtr. Approx. (Inspection by RDSO) | — | — | — | 8,71,517.4 | |
| — | 45.00 | — | — | ||
| Supply of earth electrode assembly as perDrg.No.CR/S&T/SK/815 (Inspection by RDSO) | — | — | — | 39,666.15 | |
| — | 9.00 | — | — | ||
| Supply of VHF 25W transreceiver(synthesised) set complete consisting of Analog set as per CR specification.(Inspection by RITES) | — | — | — | 1,68,917.4 | |
| — | 45.00 | — | — | ||
| Supply of Trans-receiver Hand held 5 Watts VHF Set along with two sets of OEM approved rechargeable battery including one as spare, quick Battery Charger, helical Antenna and belt clip comforming to RDSO Specification No RDSO/SPN/TC/107/2018 Rev 0.0 with Amendment No. 01 or later conforming to tender document Chapter VI. (Inspection by Consignee) | — | — | — | 4,77,538.2 | |
| — | 1.00 | — | — | ||
| Supply, Installation, testlng & Commissioning of servers to work as IP-PBX.The server shoul d be Installed with Ubuntu Server LTD 22.04.As per RB DoC No.2DZ2/Tele/9{3)/4 dated 13.09.2O22 (Note: Server should be COTS and not any proprietary server) (b) from 48 upto 5O0 subscriber. (Inspection by Consignee) | — | — | — | 1,57,053.58 | |
| — | 85.00 | — | — | ||
| Supply of 48 fibre straight joint closure (SJC) complete with all accessories as per RDSO specification No. RDSO/SPN/TC/68/2007, Rev.0 amendment No. 1.1 or latest amendments as per or TEC Spec.G/OJC/02/02 Sept.2003 or latest of Make Raychem make model FOSC 400 B4 48F or TVS ICS make model 1500-L:1 83 -XX or Birla VXL make model VT-200 or 3M make model 2179 CD (Inspection by RDSO) | — | — | — | 2,45,259.85 | |
| — | 65.00 | — | — | ||
| Supply & installation of Optical fiber cable termination box for 48 fibers complete with base housing, base mountings with fixing arrangement etc & splicing of fibers with low loss of pigtail cables as per detailed specification mentioned inrespective tender documents. Two pairs of fibers shall be derived from either side of OFC cable at every OFC cable hut provided at way side stations through pigtails with SC/APC connectors and remaining fibers on either side will be made through by splicing. At OFC terminal stations/MW repeater stations, all fibers shall be derived from either side and to be terminated in OFC termination box through pig tails and SC/APC connector. The OFC termination box to be supplied as per TEC No.G/FTB 01-02 March- 99 or latest. Splice losses in no case should bemore than 0.1 dB. Necessary 0 dB connectors should be provided by contractor in OFC termination box. (Inspection by Consignee) | — | — | — | 13,40,461.85 | |
| — | 1.00 | — | — | ||
| Control Room Equipment (CRE) as per RDSO Specification No. RDSO/SPN/TC/66/2007 Rev.O or latest. Note: Equipment must compatible with the existing equipment installed in division. (Inspection by consignee) | — | — | — | 91,671.84 | |
| — | 1.00 | — | — | ||
| Test Room Equipment as per RDSO specification no. RDSO/SPN/TC/66/2007 Rev.0 or latest. Note: Equipment must compatible with the existing equipment installed in division (Inspection By consignee) | — | — | — | 91,671.84 | |
| — | 1.00 | — | — | ||
| Three way Amplifier (TWA) equipments compatible with existing control system of division RDSO Spec no RDSO/SPN/TC/66/2007 with Amendment 2 or latest.(Inspection By consignee) | — | — | — | 26,432.05 | |
| — | 18.00 | — | — | ||
| Control Way Station Equipment (MTWE) rack mounted, 48V operated with push button Telephone as per RDSO Specification No. RDSO/SPN/TC/66/07 with amendment No. 2 or later should be compatible to the existing system installed in Division, Central Railway. (Inspection By RDSO) | — | — | — | 8,84,862.36 | |
| — | 9.00 | — | — | ||
| "Lightening & Surge protection device, Single phase + neutral (housed in a suitable impact resistance box) for providing B-class protection as per RDSO Spec. No.RDSO/SPN/165/2004. The main components of device should be OBO, Phinix or Shirtec Make with indication box and Elmex type terminals with nut and bolts duly wired with 16 sq.mm Copper wire between each phase and neutral and 25 sqmm between neutral and earth comprising of (a) One module to be connected between phase and neutral and (b) One module to be connected between neutral and earth as per technical specifications mentioned in Annexure.(Inspection by Consignee)" | — | — | — | 99,795.51 | |
| — | 9.00 | — | — | ||
| Lightening & Surge protection device, Single phase + neutral (housed in a suitable impact resistance box) for providing C-class protection as per RDSO Spec. No.RDSO/SPN/165/2004. The main components of device should be OBO, Pheonix or Shirtec Make with indication box and Elmex type terminals with nut and bolts duly wired with 16 sq.mm Copper wire between each phase and neutral and 25 sqmm between neutral and earth comprising of (a) One module to be connected between phase and neutral and (b) One module to be connected between neutral and earth as per technical specifications mentioned in Annexure.(Inspection by Consignee) | — | — | — | 76,746.51 | |
| — | 3.00 | — | — | ||
| Supply of maintenance tool kit consisting of following items. (I) Digital multimeter 4 1/2 digit with Liquid cristal display 1 No. of philips/Motwane Make.(II) Utility knife- 1 no. (III)cable slitter-1 no. (IV)Tubing cutter for cable armour-1 no. (V) Bare fiber adaptor-1 No. (VI) Miller high precision stripper for fiber buffer -1 No. (VII) Cleaver Fujikura make or similar -1 No. (VIII) Mechanical splice joint set, 1 set consisting of 6 Nos. (IX)Ceramic scissor CSI - 1No. (X) FC/PC Adopter with ODB loss- 10Nos. (XI) Optical fiber terminal block v groove - 2Nos. (XII)Earth resistance measuring instrument with all accessories suitable for measuring earth resistance in range of 0.1 Ohms to 10 Ohms.-01 Nos. Make-Metravi (XIII)Megger-01 Nos. Make- Fluke (XIV) Laser distance meter PRO-L100- 02 Nos. (XV) Supply of digital multimeter 3 3/4 digit liquid crystal display type ( Philips or motwane make). (xvi) Supply of LPG Blow Lamp - 02 Nos. and Kerosene Blow Lamp - 2 Nos. (For used in copper cable jointing) (xvii) Supply of MiniHammer set with chisel and Taparia make screw driver set with covered holder. (xviii) Transmission Measuring Set, For Telecom Railway, IRS:TC-43/87 Make: Anuvidyut (xix) Cross Talk Measuring Set make: Anuvidyut or equivalent. (Inspection by RITES) | — | — | — | 5,19,306.93 | |
| — | 3.00 | — | — | ||
| Supply of cable avoider tool (cable location equipment) of make 3m/C-Scope-rigid suitable for detecting and route tracing buried equipment. This tool should be utilised to avoid the path of existing cable, pipes buried under the ground. The line maring should be taken from Railway supervisor accordingly before starting the trench working. Each set shall contain cable location unit 1 nos., clamp complete with wires etc.-1 nos and conforming to tender document Chapter VI. (Inspection by RITES) | — | — | — | 7,58,465.49 | |
| — | 2.00 | — | — | ||
| Supply of OTDR MTS-5100 sutiable for 1310/1550 nm fiber with resolution of 60cm dynamic range of 31/29db or better with all accessories with a flash ROM of minimum 1GB , AC adaptor / charger, rechargable battery, manuals, hard and soft carrying case etc. as per tec. specification TEC/GR/TX/OTD 01/04 APR 2010 with latest ammendements enforce at the time of Tender opening confirming to tender document chapter VI. (Inspection by RITES) | — | — | — | 10,79,917.22 | |
| — | 2.00 | — | — | ||
| Supply of Automatic fusion splicer fully automatic RTC microprocesser controlled (ARC fusion type) splicer with Video display , wall image processing, heat oven , fiber fixtures, battery backup, high precision fiber cleaver, stripping tool and other compatible accessories Make- Fuzikura 88S+ or equivalent model of Fuzitsu or Siemens or latest along with sufficient no. of splice protection sleeves and bottle of Iso-propyle alchoal to be supplied for test splice as per TEC. specification No. GR/OSM/01/03 APR 2005 with latest ammendement in force at the time of tender opening.. (Inspection by RITES) | — | — | — | 15,06,087.3 | |
| — | 4.00 | — | — | ||
| Supply of handheld Digital Multimeter conforming to tender document Chapter VI. (Inspection by Consignee) | — | — | — | 15,456.12 | |
| — | 4.00 | — | — | ||
| Supply of optical power meter, optical light source and amp visual fault locator conforming to tender document Chapter VI (Inspection by Consignee) | — | — | — | 62,211.6 | |
| — | 2.00 | — | — | ||
| Supply of cable fault locator and cable tester conforming to tender document Chapter VI. (Range : 20 KMs) (Inspection by RITES) | — | — | — | 6,12,991.64 | |
| — | 2.00 | — | — | ||
| Supply of Digital earth clamp tester for measurement of earth resistance. Make - Motwane Model DECT-3/ FLUKE Model-1630/ MECO Model-4680 B/ KYORITSU Model-4200. Generalized Specilication for Portable Digital Earth Clamp Meter is as under:- SN. Parameters Characteristics l.Resistance measurement range--O.Ol Ohm to l2OO Ohm. 2.Current Measurement Range--0 to 2O A, 3.Display--4 digrts 9999 count LCD, 4.Resolution Range--O.OO1 Ohm to 30 Ohm,5.Accuracy-+/-( I percent+ 0.01 Ohm to +/-(25 percent +30 Ohml,6.Conductor size -- 23mm approx / 35mm approx, 7.Jaw size --65mm x 32mm, 8.Instruction manual-To be provided, 9.Computer interface - RS 232,US8, 10.Environmental - Working temperature: 0 deg to 50 deg, Humidity less than 85 percent RH. 11.Memory Storage Facility-99 records 9(i) loop resistance with no inductive, external magnetic field-- < 50 A /m 9(ii) External electric field -<1 V/m,10.Power Source-6 v DC (4x1.5 V AA alkaline batteryl, 12.Single measurement / Sampling time- 0.5 second, 13.Sound and light enunciator - Beep sound, Flashing Symbol, AL Key to turn on - off and setting the sound and light alarm, 14.Overload Indicator- -"OL" on display, l5.Overload Protection - 100A [Continuous],200A[5 sec], 16.Low battery indication- Display Symbol, 1 7. Range Selection- -Auto, 18,Single Measurement time-0.5 sec (Inspection by Consignee) | — | — | — | 95,501.84 | |
| — | 2.00 | — | — | ||
| Supply of Ethernet Tester of Stanlay Make: NETCATPRO2 or similar or better as per Specn given in Annexure-VI. .(TO BE INSPECTED BY CONSIGNEE) | — | — | — | 76,273.88 | |
| — | 18.00 | — | — | ||
| Supply of 2 wire /4 wire light weight ECP minature portable control phone RDSO Spec no. IRS/TC/78/2000 with Ammendement no.3 or latest. (Inspection by Consignee) | — | — | — | 29,510.46 | |
| — | 140.00 | — | — | ||
| Supply of 6 pin Emergency Socket Box made of FRP material as per RDSO Specification No. RDSO/SPN/TC/44/2002 ver. 2amendment-III or latest. (Inspection by Consignee) | — | — | — | 6,02,028 | |
| — | 140.00 | — | — | ||
| Supply of 6 pin Emergency Socket flat type to suit light weight Potable Control Telephone 4 Wire. (Inspection by Consignee) | — | — | — | 51,347.8 | |
| — | 140.00 | — | — | ||
| Supply of MS Plate of 300 x 300 mm x 8mm complete with nut bolts. (Inspection by Consignee) | — | — | — | 44,013.2 | |
| — | 10.00 | — | — | ||
| Supply of cable termination Panel as per Drg no. SK/CSTE(C)\97\26, fitted with 12 No of 32 way U link feed Panel along with U links complete and mounting arrangement for isolation transformers. (Inspection by Consignee) | — | — | — | 3,15,131.1 | |
| — | 130.00 | — | — | ||
| Supply of Themoshrink jointing kit (Reinforced) TSF 2 type generally conforming to RDSO specification RDSO/SPN/TC/57/2015 rev 1 with modified kit contents as per CSTE's Specification No: CR/SPN/TC/57(A)/2015 dt. 06.01.2015 (Table A) to be suitable for jointing both 10/20/50 pair PIJF and 4/6 quad cables along with sub-kit (Table-B) for armour continuity. (Inspection by RDSO) | — | — | — | 3,26,543.1 | |
| — | 130.00 | — | — | ||
| Supply of Thermo shrink 2T jointing kits for jointing underground 0.9 mm dia. conductor 6 quad cable as per specification IRS:TC 77-2012 Rev.3, Amd.3 or latest. (Inspection by RDSO) | — | — | — | 3,55,486.3 | |
| — | 250.00 | — | — | ||
| Supply of 1 T VF Transformer 470:1120 ohms. (Inspection by Consignee) | — | — | — | 1,81,270 | |
| — | 80.00 | — | — | ||
| Supply of Push button telephone sutiable for connecting with way side equipment and the system as per TEC specification no.GR/TEL-02/04 sept.and from DOT/TECH approved firms. 2002 with latest ammendements model Binatone concept 700/Beetel/Panasonic. (Inspection by Consignee) | — | — | — | 31,282.4 | |
| — | 15.00 | — | — | ||
| "Supply of Fixed Wireless Telephone supporting - band GSM, 2G, 3G, 4G Volte with 2 way speakerconsisting of LCD screen, High - performance detachable 'TNC' Antenna, Speed Dial, Supports 4G Volte calls, and FM radio, Direct Memory Keys (M1, M2, M3, M4) with 08 Programmable speed dial keys, rechargeable battery, Adaptor with Surge Protection Make- Betel or Similar. Including SIM Card & 6 Months of recharge. (Inspection by Consignee)" | — | — | — | 67,417.35 | |
| — | 2000.00 | — | — | ||
| Switch Board cable - Supply of 05 pair 0.63 mm dia. Switch board indoor cable , Make Delton/ Finolex/ Bhansali (Inspection by Consignee) | — | — | — | 47,860 | |
| — | 2000.00 | — | — | ||
| Switch Board cable - Supply of 10 pair 0.63 mm dia. Switch board indoor cable, Make Delton/ Finolex/ Bhansali (Inspection by Consignee) | — | — | — | 89,680 | |
| — | 2000.00 | — | — | ||
| Switch Board cable - Supply of 20 pair 0.63 mm dia Switch board indoor cable, Make Delton/ Finolex/ Bhansali . (Inspection by Consignee) | — | — | — | 1,79,380 | |
| — | 1000.00 | — | — | ||
| Supply of paramite Battery wire, 51 strands each strand size of 0.75 mm dia in RED (Inspection by Consignee) | — | — | — | 42,770 | |
| — | 1000.00 | — | — | ||
| Supply of paramite Battery wire, 51 strands each strand size of 0.75 mm dia in Black (Inspection by Consignee) | — | — | — | 42,770 | |
| — | 1000.00 | — | — | ||
| Supply of paramite Battery wire, 51 strands each strand size of 0.75 mm dia in GREEN (Inspection by Consignee) | — | — | — | 42,770 | |
| — | 6500.00 | — | — | ||
| Supply of CAT 6 Cable with identifications marking on cable at regular interval of make: Molex or D-Link ,network, krone or similar. (Inspection by Consignee) | — | — | — | 99,645 | |
| — | 54.00 | — | — | ||
| Supply of patch cords, 15 Mtrs. long with FC-BC, FC-PC to FC-SC or latest suitable connectors as per tech spec. Gr. No. G/OFJ-0I/O3 Jan 99 with latest Amendment to suit the existing system/FDMS & supplied OFC equipments (Inspection by Consignee) | — | — | — | 68,000.58 | |
| — | 1000.00 | — | — | ||
| Supply of PVC Insulated 3 core 2.5 Sq.mm 14awg 1.1 KV Grade Outdoor Strengthen copper cable. (INSPECTION BY CONSIGNEE) | — | — | — | 79,070 | |
| — | 300.00 | — | — | ||
| "Supply of PVC Insulated 3 core 1.5 Sq.mm 12awg 12.1 KV Grade Outdoor Strengthen copper cable. (INSPECTION BY CONSIGNEE)" | — | — | — | 15,000 | |
| — | 90.00 | — | — | ||
| Supply and installation of 20 pair CT box (Inspection by Consignee) | — | — | — | 2,33,826.3 | |
| — | 27.00 | — | — | ||
| Supply of KRONE DP 10 pairs in metal box with locking arrangement as per tender document. Conforming to Tender Document Chapter VI(Inspection by Consignee) | — | — | — | 21,318.66 | |
| — | 2250.00 | — | — | ||
| Supply and fixing of 25 mm dia. PVC channel, with cover and running switch board cable through them. make Precision or Presto plat or presto teak or similar (Inspection by Consignee) | — | — | — | 67,140 | |
| — | 2250.00 | — | — | ||
| Supply of PVC channel 25mmx 38mm with other fixings all accessories like clips, T bends & coupling etc. make Precision or Presto plat or presto teak or similar (Inspection by Consignee) | — | — | — | 1,15,132.5 | |
| — | 27.00 | — | — | ||
| Supply of KRONE DP 20 pairs in metal box with locking arrangement & krone module for 20 pair (Spec no. G/CTN-10/03 june 2005) as per tender document. Conforming to Tender Document Chapter VI (Inspection by Consignee) | — | — | — | 28,715.31 | |
| — | 2250.00 | — | — | ||
| Supply & fixing size 50 x 50 mm of PVC Casing capping on wall with all accessories . This includes laying of telecom cables inside the installed PVC casing of ISI make or approved. (Inspection by Consignee) | — | — | — | 2,28,172.5 | |
| — | 9.00 | — | — | ||
| Supply, fixing & cable termination of 100 pair Krone DP box suitable for external/Internal use conforming to tender document Chapter VI. (Inspection by Consignee) | — | — | — | 50,121 | |
| — | 27.00 | — | — | ||
| Supply of CT box with krone terminal 50 pair. Make Phonics or Krone or Similar. (Inspection by Consignee) | — | — | — | 20,457.63 | |
| — | 11.00 | — | — | ||
| Supply of covered 19'' 42U Floor Stand Rack for Networking/ Server as per technical specifications conforming to tender document Chapter VI. (WQ/VERO President /RITTAL/APC make.) compleate with all fittings including DC fans (48V) -2Nos. , Seperator sheet /Plate to keep testing equipments-1 no and AC power distribution pannel (horizontal fitting) with power socket with fuse/MCB protection (minimum 12 nos. of 230V-15A/5A combined) and compatibility with all equipment conforming to Din-41494 or equivalent EIA/ISO/EN standard manufacturer must certify that products are complied with DIN-41494 or equivalent EIA/ISO/EN/CEA/UL standards. (Inspection by Consignee) | — | — | — | 4,33,655.09 | |
| — | 9.00 | — | — | ||
| Supply & Installation of 24"U Rack vertical as per technical specification conforming to tender document Chapter VI. and fixing as per the site incharge instructions. Necessary materials required such as clamps, screws, anchor bolts etc., are to be arranged by the contractor. (Inspection by Consignee). | — | — | — | 3,00,240 | |
| — | 10.00 | — | — | ||
| Supply, installation & commissioning of 19'' 42U covered racks with all accessories like electrical fitting, Fan, AC power distribution panel, Fan tray, Cable manager,Spike buster etc of HCL,APW,Rittal,President or similar make having size of approximately 2.2mtr (42Uheight) x 600mm widthx600mm depth and duly approved by the enginner incharge of the work. The rack shall be complete with all fittings for housing SDH equipment, primary muxes,DDF,MDF using krone module and other equipment like runway ladders etc,completely wired & equipped with integrated protection modules for all channels as per technical specifications & other stipulation of tender document.The contractor shall provide Ulink Patch panel ,CAT 6 patchchords and other accessories required for installation & install them within the installation cost.It should be possible to lock all the equipment with only order wire telephone reaining outside the rack. (Inspection by Consignee) | — | — | — | 3,25,003 | |
| — | 9.00 | — | — | ||
| Supply and installation of 19 inches 9U rack wall mountable The rack shall ha ve following specifications: The rack shall be Wall Mountable. The cabinet made up of steel and powder coated and glass door with locking arrangement. The rack shall includes 5 Sockets PDU , cooling fan and complete accessories. This item shall be of make:- Valrack (465404 - PROW INT PT 9U65 A) OR President OR HCL OR Mass Rack OR 3M.conforming to clause mentioned in Chapter No VI of tender documents.(INSPECTION BY CONSIGNEE) | — | — | — | 90,000 | |
| — | 2.00 | — | — | ||
| Supply of PC based network health and Diagnostic system with report generating facility conforming to tender document Chapter VI. (Inspection by Consignee) | — | — | — | 1,46,939.18 | |
| — | 2.00 | — | — | ||
| SUPPLY of All in one Printers - Laser Jet Pro, M126nw, Print copy scan, WiFi Printer, Compact Design, Reliable and Fast Printing, Network support, Warranty : 03years ( with extended warranty of 02 yrs ) . Conforming to Tender Document Chapter VI (Inspection by Consignee) | — | — | — | 36,982.16 | |
| — | 2.00 | — | — | ||
| SUPPLY of MULTI FUNCTION COLOUR PRINTER FOR A3 PAPER SIZE conforming to tender document Chapter VI. (Inspection by Consignee) | — | — | — | 1,50,342.98 | |
| — | 9.00 | — | — | ||
| SUPPLY OF ON LINE UPS WITH ISOLATION TRANSFORMER SUITABLE FOR SINGLE PHASE AC INPUT & SINGLE PHASE AC OUTPUT,FLOOR MOUNTED TYPE. RATING OF UPS 2.0 KVA,BACK UP TIME 120 MINUTES. Conforming to Tender Document Chapter VI (Inspection by Consignee) | — | — | — | 3,76,224.66 | |
| — | 9.00 | — | — | ||
| Supply of Record table Make Godrej Model T102 or latest. (Inspection by Consignee) | — | — | — | 1,97,045.91 | |
| — | 27.00 | — | — | ||
| Supply of Chair Make Godrej Model PCH 7001 or latest (Inspection by Consignee) | — | — | — | 2,67,062.67 | |
| — | 27.00 | — | — | ||
| Supply of Steel stools Godrej make model no ST2 or equivalent of same make. (Inspection by Consignee) | — | — | — | 44,218.98 | |
| — | 9.00 | — | — | ||
| Supply of Steel cupboard (plain storewel) size 6' x 3' Godrej make (Inspection by Consignee) | — | — | — | 93,351.69 | |
| — | 1.00 | — | — | ||
| Supply, installation and testing of IPDSLAM , make ZYXEL , D-link or similar. Warrenty as per IRS condition of contract clause 3200, inspection of RITES . Conforming to Tender Document Chapter VI. (Inspection by RITES) | — | — | — | 18,58,574.25 | |
| — | 18.00 | — | — | ||
| Supply of Optical media Converter.Fiber to 4 E1 ports and one Fast Ethernet port of 10/100 mbps.Uplink port for point to point connectivity.Working voltage 230VAC/48V, DC on same ocket.Make;MROTEK/Team Engineer/CYGNUS . Conforming to Tender Document Chapter VI (Inspection by Consignee) | — | — | — | 3,82,816.98 | |
| — | 18.00 | — | — | ||
| SUPPLY of LAN extender as per RDSO specification no.RDSO/SPN/TC/82/2020 rev2.0 similar to make CYGNUS/TEAM Engineer/NOMUS (Inspection by Consignee) | — | — | — | 1,00,020.78 | |
| — | 18.00 | — | — | ||
| "Supply of E1 to Ethernet Converter Make MROTEK PINE IEI/4FE/AC/DC or similar with same Specification. one E1 interface & four Ethernet interface . Conforming to Tender Document Chapter VI(Inspection by Consignee)" | — | — | — | 1,37,643.12 | |
| — | 10.00 | — | — | ||
| Supply,Installation,Testing and commissioning of -48 V SMPS based power supply plant as per RDSO Specification no.RDSO/SPN/TC/23/1999 Ver 4 with latest amendment Similar to PUNCOM make suitable for single VRLA Battery Bank of 48V/300 AH capacity ,single phase incomming power supply of Range 165V-260 V with 25 Amp FR-FC SMR modules in 2+1 configuration expandable upto 100 A (Inspection by RDSO ). It shall be equiped with surge and lightning protection of class B and Class C alongwith installation and service manual. (Inspection by RDSO) | — | — | — | 14,14,390.6 | |
| — | 10.00 | — | — | ||
| Supply of stackable type VRLA fully charged battery 48V/300 AH ( set of 24 nos cell each of 2 Volt/300 AH capacity) with inter cell connectors housed in MS tray as per RDSO specification IRS:S-93/96 with latest Amdt (inspection by RDSO) .Make : Exide, Amaron, Okaya, Luminous, Mrotek, , Quanta, Amar Raja,Su-Kam,SF Sonic (Inspection by RDSO) | — | — | — | 12,70,611 | |
| — | 3.00 | — | — | ||
| Supply of Digital measuring wheel for measuring cable trench/route make: Stanley or Freemens make or similar reputed make. (Inspection by Consignee) | — | — | — | 10,722.27 | |
| — | 153.00 | — | — | ||
| Supply of Apparatus Case with godown locks with detachable handle on both the doors. Half Case as per Drg. No.SK 783-1 & 2 with latest alteration.(Ispection by RITES) | — | — | — | 16,00,656.93 | |
| — | 18.00 | — | — | ||
| Supply of Auto Media change over device for DAC/UFSBI to optical, STM(E1). Standard 19" Rack Mountable device consisting of two E1 interface, dual optical ports with 1+1 protection by Single core path 20 Kms driving distance. E&M 2W/4W with auto change ove mechanism to QUAD ports. Multidirection supporting upto 3 direction. E&M ports supporting programmable modes - 12*E&M, 6*E&M+6*QUAD & 8*E&M+4*QUAD. Device Managemen with Telent & NMS.Unit Support Audio Buzzer Alarm Interface. Potential Free contact. Dual DC with 18-72VDC range. Accessories - AC-DC adaptor, E1 & E&M cable. Make: MROTEK/CISCO/MAPLE (Inspection by RITES) | — | — | — | 31,02,480 | |
| — | 2.00 | — | — | ||
| Supply and Installation of CYGNUS845-4P MULTIPLE MEDIA AUTOCHANGEOVER CONVERTER-4 PORT,for simultaneously interconnecting Digital Axle Converter, UFSBI, Block Phone etc. across a Block Section/ IBsover multiple media. Product has thefollowing features: a)Two 120 ohm E1Main Links with RJ45 connector,having (1+1) hot standby facility b)Two optical Main Links with (1+1hot standby dual core path and single core path) having 20 Km drivingdistance. c)Four V.21N.23 (E&M) 2-wire/4-wire user interface with autochangeover to Quad links in case of failure of all Main Links. Each userport is configurable as 2W or 4W without any restriction. d)Unit supports power OFF fail safe mechanism. In case the unit is switched OFF, all analog user devices are bypassed to the Quad link automatically. - e)Unit supports four numbers of Potential free contact swhich can be linked with datalogger/RTU for E1 Status, Optical status & Power Supply status. ' f)Unit supports front panel resettable audible buzzer in case of main link fails (optical or E1). g)Unit supports front panel LED indicators for Quad health status, E1 dual, Optical dual path. h)Uriit %B7 has dual hot standby DC power supply having 24V DC/48V DC i)"Unit is 1U heightwith 19 inch rack mountable-facilityj)Unit supports operating temperature from -5 degree Celsius to +55 degree Celsius. Accepted Make/Brand:-CYGNUS or Team-Link or Similar.(Inspection by Consignee) | — | — | — | 2,40,991.4 | |
| — | 11.00 | — | — | ||
| Design, Fabrication & Supply of 1 rack mountable modular intelligentservice IP MPLS aggregator router with minimum switching speed of 160 Gbps, unit to support L2 VPN,L3 VPN, MPLS- TE, unit to be capable to support 8x10Gbe, 48x1GbE, 64XE1 ,12XSTM 1 ports or 2x8 port WDM, support multiple routing functions such as OSPF V3,ISIS, BGP & MP-BGP and support LDP and RSVP - TE to dynamically establish MPLS tunnels & PW service. It should support dual main control card redundancy design supporting 1:1 hot back up. The router should have console and SNMP interface, FAN Module,control card module and Redundant 48V DC power supply modules including connection cable andfixing accessories etc. The Router should have required interface slots to accommodate 4x10Gbe, 8x1Gbe, 16 Els and 4xStm-1 interface modules from day one .The router should support all thesoftware features, environmental standards and security features asmentioned in RDSO technicaldocument no STT/TAN/IP-MPLS/2020 Ver2.0 or latest for the LER Router Conforming to Tender Document Chapter VI (INSPECTION BY RDSO) | — | — | — | 80,95,595.09 | |
| — | 11.00 | — | — | ||
| Supply of 4 port x10G SFP (optical) module card suitable for the IP-MPLS router . (2 Nos. of 2 Port x 10G SFP Module Card). (INSPECTION BY RDSO) | — | — | — | 2,80,182.43 | |
| — | 16.00 | — | — | ||
| Supply of 8 port x 1Gbe (4 no. of optical port and 4 no electrical port) module card suitable for IP-MPLS Router. (INSPECTION BY RDSO) | — | — | — | 4,81,101.76 | |
| — | 11.00 | — | — | ||
| "Supply of 16 port channelized E1 Interface Card (2 Nos. of 8 Port channelized E1 Interface Card). (INSPECTION BY RDSO)" | — | — | — | 9,11,127.36 | |
| — | 60.00 | — | — | ||
| Supply of SFP (1550 nm) 1.25 GBPS as pe the site requirement for electrical 10/100/1000 MBPS support as per site condition., as per Specification given in Annexure-VI. (INSPECTION BY RDSO) | — | — | — | 5,93,178 | |
| — | 40.00 | — | — | ||
| Supply of CWDM SFP+ 10Gbps 1xx1nm (xx=47,49,.....61) - 40Km transmission working on single or dual fibre as per site requirement -DDM-RoHs (suitable for the IP-MPLS network). Make: Cisco, Eoptical or similar suitable for Neon., as per Specification given in Annexure- VI. (INSPECTIONS BY RDSO) | — | — | — | 10,25,225.2 | |
| — | 4.00 | — | — | ||
| Design, Fabrication & Supply of rack mountable modular intelligent service IP MPLS aggregator router with minimum switching speed of160 Gbps, unit to support L2VPN, L3 VPN, MPLS- TE, unit to be capable to support 8x10Gbe, 48x1GbE, 64xE1, 12XSTM 1 portsor 2x8 port WD support multiple routing functions such as OSPF, ISIS, BGP & MP-BGP and support LDP and RSVP - TE to dynamically establish MPLS tunnels & PWservice. It should support dual main control card redundancy design supporting 1:1 hot back-up. The router should have console and SNMP interface, FAN Module, Redundant control card modules and Redundant 48V DC power supply modules including connection cable and fixing accessories etc. The Router should have required interface slots to accommodate 8x10 Gbe interface modules from day one. The router should support all the software features, environmental standards and security features as mentioned in RDSO technical document no. STT/TAN/IP-MPLS/2020 Ver1.0 or latest for the LSR Router Conforming to Tender Document Chapter VI. (INSPECTION BY RDSO) | — | — | — | 29,72,805.88 | |
| — | 1.00 | — | — | ||
| — | — | — | 11,43,742.99 | ||
| — | :- Supply and Liebert with NMS (INSPECTION | and installation of Version 2.0 or latest 5 KVA online UPS with or similar or better). This for client for sectional BY RDSO) | Technical Advisory with active, standby Battery) (Make: portable monotoring Tender Document | ||
| — | 10.00 | — | — | ||
| Supply , installation and Commissioning of 16 Port E1 Card along with Patch Panel/Krone Module and wiring for Routers with all accessories etc. (INSPECTIONS BY RITES) | — | — | — | 9,35,673.8 | |
| — | 2.00 | — | — | ||
| Supply of 2X 10G Adapter Interface Card without 10G SFP+ Modules for LER Routers. (INSPECTIONS BY CONSIGNEE) | — | — | — | 1,04,447.3 | |
| — | 2.00 | — | — | ||
| Supply of 8X1G Adapter Interface Card (any combination: one No. of 8X1G or Two Nos. of 4 X 1G) with out SFP for LER Routers. (INSPECTIONS BY CONSIGNEE) | — | — | — | 1,09,669.68 | |
| — | 2.00 | — | — | ||
| Supply of channelized STM-1/4 (4 port STM-1 or one port STM-4) card or 2 nos of 4/8 port x 10Gbps WDM interface module card suitable for LER/LSR along with 2nos of SFP's (1.2 Gbps or 2.5GBps) as per site requirement Inspection: (INSPECTIONS BY RITES) | — | — | — | 1,54,657.96 | |
| — | 2.00 | — | — | ||
| Supply of 10G SFP+ Module with 40 Kms range for above Routers as per Specn given in Annexure-XVII. (INSPECTION BY CONSIGNEE) | — | — | — | 1,80,698.2 | |
| — | 2.00 | — | — | ||
| Supply of 1G SFP Module with 10 Kms range for above Routers as per Specn given in Annexure-XVIIL. ( INSPECTION BY CONSIGNEE) | — | — | — | 2,176 | |
| — | 2.00 | — | — | ||
| Supply of STM-1 SFP Modulewith 15 km range, along with all accessories for the aboveRouters. (INSPECTION BY CONSIGNEE) | — | — | — | 13,414.6 | |
| — | 9.00 | — | — | ||
| Supply of 10/100/1000 Base-T Copper Ethernet Transceiver SFP Module with allaccessories. The make of the modules shall be the same as that of the above LER to ensure reliable functioning, and the same shall be supplied with all the accessories. (INSPECTION BY CONSIGNEE) | — | — | — | 37,066.14 | |
| — | 12.00 | — | — | ||
| Supply, installation, testing and commissioning of TANSY hybrid multiservice device 1.5U Height & 19" rack mountable supporting STM 1/4 interface or 2x10Gps ports two SFP ports included for 1Gbps optical fiber support: Four Gigabit Ethernet ports(Railnet); Eight El circuits for data: dual power supply, DC supported; Three empty slots to support FXO/FXS & E&M for auto phone and control phone (conference); Make : TANSY/NOKIA/LANTANA/CISCO/ WAVES or similar 1)STM 1/4 SFP module 10 kms 2 numbers or 1Gps module 2) 10 port FXS auto interface module. (01 no.). suitable for TANSY (3) 4 port E&M voice module (01 no.) suporting controll phone (conference facility) (4) 10 Port FXO module (01 no.) suitable for TANSY all included or FXS -FXO combine module (6+4) instead of invididual modules of FXO & FXS 4) four port Ethernet module with 2 ports supporting POE for VOIP/Camera (INSPECTION RITES) | — | — | — | 92,35,460.4 | |
| — | 1.00 | — | — | ||
| "Supply of Communication Server as per clause 5 and 6 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest , Communication server block Shall be provided with (1+1) redundancy .Inspection by RDSO.(Suitable for existing system of Bhusawal Division )" | — | — | — | 15,67,602.71 | |
| — | 1.00 | — | — | ||
| "Supply of Network Management Server as per clause 5 and 8 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest. Inspection by RDSO..(Suitable for existing system of Bhusawal Division )" | — | — | — | 3,72,770.61 | |
| — | 1.00 | — | — | ||
| "Supply of Voice Recording Server as per clause 5 and 7 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest. Inspection by RDSO. .(Suitable for existing system of Bhusawal Division )" | — | — | — | 3,99,871.54 | |
| — | 1.00 | — | — | ||
| Supply of The Portable Maintenance Terminal as per clause 8.9 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest .(Inspection by RDSO.) | — | — | — | 39,854.31 | |
| — | 1.00 | — | — | ||
| "Supply of Event Notification Gateway as per clause 12.3 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest .(Inspection by RDSO.)" | — | — | — | 2,19,464.38 | |
| — | 1.00 | — | — | ||
| Supply of Desktop Client PC as Per Clause 8.7 and 8.8 of RDSO/SPN/TC/99/2012 Rev.2 or latest .(Inspection by RDSO) | — | — | — | 45,168.21 | |
| — | 1.00 | — | — | ||
| "Supply of Client PC for Voice Recorded Server as RDSO/SPN/TC/99/2012 Rev.2 or latest along with UPS .(Inspection by RDSO)." | — | — | — | 45,168.21 | |
| — | — | — | Per | ||
| — | — | — | Clause | ||
| — | — | — | 8.8 | ||
| — | 1.00 | — | — | ||
| "Supply of controller Console as per cause 9 of RDSO/SPN/TC/99/2012 Rev.2 or Latest . (Inspection by RDSO.)" | — | — | — | 2,72,762.87 | |
| — | 1.00 | — | — | ||
| "Supply of Test room Console as per clause 10 of RDSO/SPN/TC/99/2012 Rev.2 or Latest. Inspection by RDSO..(Suitable for existing system of Bhusawal Division )" | — | — | — | 2,70,201.18 | |
| — | 1.00 | — | — | ||
| Supply of Gateway for Emergency communication at HQ/way station as per Clause 13 of RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by RDSO).(Suitable for existing system of Bhusawal Division ) | — | — | — | 78,571.31 | |
| — | 45.00 | — | — | ||
| Supply of control IP telephones without hands free and gooseneck operation for way side station as per clause 11of RDSO/SPN/TC/99/2012 Rev.2 or Latest . Inspection by RDSO. | — | — | — | 8,04,180.15 | |
| — | 9.00 | — | — | ||
| "Supply of FXO Gateway 16 Port as per clause 12 of RDSO/SPN/TC/99/2012 Rev.2 or Latest .(Inspection by RDSO)" | — | — | — | 4,51,469.61 | |
| — | 18.00 | — | — | ||
| Supply of DTMF Gateway 4 Port as per clause 12 of RDSO/SPN/TC/99/2012 Rev.2 or Latest.(Inspection by RDSO.) | — | — | — | 14,14,283.58 | |
| — | 18.00 | — | — | ||
| Supply of Gateways to be provided at Way Station (WSGW) for analog telephones as per RDSO/SPN/TC /99/2012 Rev.2 or latest - 4 Port. (Inspection by RDSO.) | — | — | — | 95,937.3 | |
| — | 1.00 | — | — | ||
| Supply of Mobile Application for event Notification Gateway as per clause 12.3 of RDSO/SPN/TC/99/2012 Rev.2 or Latest.( Inspection by Consignee) | — | — | — | 7,524.49 | |
| — | 360.00 | — | — | ||
| SUPPLY OF "C" CHANNEL CLAMPS with nut bolts, washers and all type fixtures for 6 inch dia pipe to be fixed o GIRDERS, on rock cuttings etc., as per DRG No.SK-900. (Inspection by RITES) | — | — | — | 6,22,980 | |
| — | 400.00 | — | — | ||
| Supply, installation, testing and commissioning of Portswise analog extension licenses conforming to clause mentioned in Chapter No.VI of tender documents.[Inspection by RITES] | — | — | — | 10,80,000 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of 8 Port Gateway, TGW 8 Gateway. OEM certified Media Gatew ays for BSL Division, Coral Tadiran Exchange Accepted Mak e Tadiran Telecom. conforming to clause mentioned in VI of tender documents. (INSPECTION BY RITES) | — | — | — | 2,80,000 | |
| — | 10.00 | — | — | ||
| Supply of 8 Port switch with 8-port 10/100/1000 Mbps with 2 combo 10/100/1000 Base-T/SFP port (optical module/SFP loaded)as per Clause No. 6 of RDSO Specification No. RDSO/SPN/TC/83/2014 Rev. 01 or later. conforming to clause mentioned in Chapter No. VI of tender documents (Inspection by RITES) | — | — | — | 2,00,640 | |
| — | 9.00 | — | — | ||
| Supply of MDF with IPM protection on system side for 150 ports. conforming to Chapter No. VI of tender documents, (Inspection by Consignee) | — | — | — | 2,04,111.18 | |
| — | 2.00 | — | — | ||
| Supply and Installation of PRI Card conforming to Chapter No. VI of tender documents, (Inspection by RITES.) | — | — | — | 65,640 | |
| — | 90.00 | — | — | ||
| Supply of line cord with connectors at both ends. (Inspection by Consignee) | — | — | — | 3,294 | |
| — | 90.00 | — | — | ||
| Supply of Telephone Handset Phone Receiver Cable Cord Wire with connector at both ends.HMT cord or similar. (Inspection by Consignee) | — | — | — | 4,727.7 | |
| — | 150.00 | — | — | ||
| Supply of Telephone Rosset for single line auto telephone with RJ-11 Types socket and line termination screw (Inspection by Consignee) | — | — | — | 1,261.5 | |
| — | 1.00 | — | — | ||
| Supply of ST63 E1 Card with e1 cables. Make : Tejas Accepted firm s offer Make: TEJAS NETWORKS LIMITED/GURUGRAM or similar (Inspection by Consignee) | — | — | — | 39,716.27 | |
| — | 2.00 | — | — | ||
| "Supply of SOT 18 Branching CARD with minimum 02 nos optical &02 electrical SFP with MODULES compatible to work with TEJAS STM 1 & STM4 TJ1400 As per TEC Spec NO. GR/TX/SDH 010/03 Jan 11 compatible with TJ1400 model equipment. (Inspection By consignee)" | — | — | — | 1,53,932.3 | |
| — | 10.00 | — | — | ||
| Supply of E1 extender at OFC end with following specifications: operations on 2-wire copper circuits using G.SHDSL, Driving range:6.5 km at 2048 kbps on 24 AWG(0.5mm dia) unloaded copper pair under error-free conditions. Power supply input-options for 230 VAC, 48VDC , 24 VDC or various combinations .Make: CYGNUS, Teamlink or similar. Firm's offer:-Make/Brand-TEANLINK 3002 G.SHDSL E1 Modem (Warranty Period : Upto 12 months from the date of delivery.)(Inspection by Consignee) | — | — | — | 94,872 | |
| — | 9.00 | — | — | ||
| Supply of 4.5 kg CPO2 type fireextinguisher along with allaccesarious, exinguisher testingcertificate has to be suppliedalong with - Supply of ISImarked CarbondiOxide type(BC) fire extinguisher of 4.5 Kgcapacity confirming to IS 2878:2004 from seamless cylinder,with IS marked control value,high pressure mtr., Longdischarge hose and horncomplete with initial gascharged with carrying handleand wall mounting braket etc. asrequired by site Engineer.(Inspection by Consignee) | — | — | — | 35,181.54 | |
| — | 500.00 | — | — | ||
| Supply of RJ-45 patch cord Cat-6 STP, 2 mtrs long. Make D-link,Digisol,Spectra or similar.(Inspection by Consignee) | — | — | — | 41,560 | |
| — | 1506.00 | — | — | ||
| Supply of RJ-45 LAN connector.Make D-link, Digisol, Spectra or similar conforming to Chapter VI of tender document. (Inspection by Consignee) | — | — | — | 3,689.7 | |
| — | 13.00 | — | — | ||
| Supply of 4 digit double face platform clock with white color LED & GPS synchronization, Including installation accessories such as GPS receiver with connecting RF cable termination with GPS Antenna and housing. The material shall comply to RDSO specification no. RDSO/SPN/TC 47>47 2008revision 4.1 or later (Inspection by Consignee) | — | — | — | 3,42,566.38 | |
| — | 9.00 | — | — | ||
| Supply of public address amplifier solid state of capacity 500 watts (RMS) output. The amplifier shall be of type SSA 5000 EM of Ahuja make or Shure OR Bosch OR Studio Master OR Ahuja or Philips or other similar make. (Inspectionby Consignee) | — | — | — | 1,65,360.33 | |
| — | 18.00 | — | — | ||
| Supply, Transportation and testing of P.A. Horn Speaker,Model UHC-30XT, Make- Ahujaor similar. (Inspection by Consignee) | — | — | — | 24,888.42 | |
| — | 18.00 | — | — | ||
| Procurement of Wall Speaker with Volume control for Waiting Room, Enquiry office similar to model.no. WS-664T of AHUJA make or similar (Inspection by Consignee) | — | — | — | 15,092.46 | |
| — | 18.00 | — | — | ||
| Supply of all metal weather resistance sound column speaker Ahuja make type no.SCM 30T or similar make. It shall hall be compatible with amplifier taken in schedule maximum power handling 30 watts with 100 volts line matching transformer with taping 20W , 15W, 10W, complete with clamp to fix at the location. (Inspection by Consignee) | — | — | — | 25,082.1 | |
| — | 60.00 | — | — | ||
| Supply of fixtures for fixing column and bi/uni-directional horn type speakers as per requirement . (sample to be aprroved by consignee) (INSPECTION BY CONSIGNEE) | — | — | — | 8,115.6 | |
| — | 18.00 | — | — | ||
| Supply of microphone for general PA with connector .Make AUD-99MS or similar & 06 meter screened cable with all necessary accessories as per RDSO/SPN/TC/63/2006 ver 1 or later. make AHUJA,Philips,Boschor similar. It Shall be compatible with amplifier and speaker taken in the schedule. (Inspection by Consignee) | — | — | — | 10,820.88 | |
| — | 18.00 | — | — | ||
| Supply of microphone stand all necessary accessories of Ahuja make ATS-5 or similar. Microphone taken in schedule shall fix in the stand properly. (Inspection by Consignee) | — | — | — | 1,539.9 | |
| — | 18.00 | — | — | ||
| Caller Id phone having following minimum specs Mute, two way speaker, Caller ID should be at least 7 segment 2 line display, pulse and tone setting, programmable flash, pulse /tone setting, support both DTMF and FSK, 30 number call log, 5 numbers of redial memory, 1.5mtr Receiver cord cable, should work without battery and external supply and must have at least one year warranty. Make- Beetel, Panasonic or similar.(Inspection by Consignee) | — | — | — | 13,318.02 | |
| — | 18.00 | — | — | ||
| Supply of aluminium self supporting ladder, height 10 feet (double sided) preferably telescopic. Sample to be approved before supplying. (Inspection by Consignee) | — | — | — | 95,147.64 | |
| — | 36.00 | — | — | ||
| Supply of extension board (Spike Guard) 5 Amp, 3 pin, 6 sockets having line indications, filter ckt. Anchor, MX, Neutronics, Olvetti make or similar. (Inspection by Consignee) | — | — | — | 12,542.4 | |
| — | 3.00 | — | — | ||
| HIKOKI Plastic Handheld Electric Blower, Make: HIKOKI or similar. Specifications as per Chapter 3 of tender document. (Inspection by Consignee) | — | — | — | 5,659.5 | |
| — | 27.00 | — | — | ||
| Supply of 24 ports LAN switch Layer-2 Type conforming Chapter VI to and Execution portion conforming to Chapter VI of tender document. [Inspection by RITES]. | — | — | — | 8,72,937 | |
| — | 18.00 | — | — | ||
| Supply of SFP Small form factor pluggable transceiver conforming to Chapter VI of tender document. [Inspection by Consignee] | — | — | — | 43,560 | |
| — | 9.00 | — | — | ||
| Supply of 48 Port ADSL Switch (IPDSLAM) conforming to Chapter VI and Execution portion conforming to Chapter VI of tender document. [Inspection of Supply portion by RITES, Inspection of execution portion by Consignee] | — | — | — | 21,66,309 | |
| — | 1000.00 | — | — | ||
| Supply of Arial OFC 6 Fibre core single mode Optical Fibre Cable Supply Portion conforming to Chapter VI and Execution portion conforming to Chapter VI of tender document. [Inspection by Consignee]. | — | — | — | 50,000 | |
| — | 2.00 | — | — | ||
| Supply of Avaya 1616- IP Telephone compatible to Avaya communication manager conforming to Chapter VI of tender document. [Inspection by Consignee] | — | — | — | 29,030 | |
| — | 9.00 | — | — | ||
| SUPPLY OF 4 PORT ROUTER AS PER RDSO SPECIFICATION: RDSO/SPN/TC/84/2008, REV.O WITH ACCESSORIES AS: 02 ON BOARD GE, 04 PORT SERIAL WAN INTERFACE CARD, 2E HWIC SLOTS, 1 ISM SLOTS, 256 MB CF DEFAULT, 512 MB RAM, IP BASE, 02 Nos. V35 CABLE, DTE MAKE TO SMART SERIAL 10 FEET LENGTH WITH REQUIRED CABLE & CONNECTION. Make- CISCO 2921/k9 or better [Inspection by RITES] | — | — | — | 5,41,620 | |
| — | 450.00 | — | — | ||
| Supply of UTP Cat-6 patch cord 3 mtrs conforming to Chapter VI of tender document. [Inspection by Consignee] | — | — | — | 29,250 | |
| — | 1.00 | — | — | ||
| Supply of standard 19" Rack Mountable 48V DC Working Add-Drop STM-4 SDH Equipment conforming to TEC GR No.:GR/SDH-010/03.JAN 2011(with latest amendment) complete with, redundant power supply ,0lnos. cross connect card equipped with 02 STM -4(L4.2) and 02 Nos. STM-1(L1.l) aggregate optical interface,63 E ls card with krone frame and modules and 08 port Ethernet card. Fast Ethernet 10/100 mbps on SDH (EoS) 10/100 Base-T Interface Module /Card, provide redundancy of power supply unit, installation Material and other accessories. Complete Engineering Order Wire(Eo W) arrangement. Make/brand-TEJAS NETWORK LTD-TEJAS XTN TJ1400 (Warranty Period : Upto 30 months from the date of delivery.)[Inspection by RITES] | — | — | — | 3,24,500 | |
| — | 36.00 | — | — | ||
| Supply of 6Amp MCB as per specification given in Annexure VI (inspection by Consignee ) | — | — | — | 19,620 | |
| — | 18.00 | — | — | ||
| Supply Consignee ) | — | — | — | 9,810 | |
| — | of | 32Amp MCB as per | VI(inspection | ||
| — | 18.00 | — | — | ||
| Supply of DC power distribution panel to cater DC power Requirement of ipmpls /STM /PDMUXES /EOW /FAN to be fixed in 19"rack. Installation to be done by contractor at his own cost. (Minimun 8 nos of DCdistribution arrangement with MCB's of suitable rating for -ve connecting copper strip for +ve) as per Annexure VI. (INSPECTION BY Consignee) | — | — | — | 56,798.82 | |
| — | 6200.00 | — | — | ||
| Supply of 120 mm HDPE pipe for laying in Horizontal Boring (Inspection by RITES) | — | — | — | 36,44,794 | |
| — | 18.00 | — | — | ||
| Supply of PCM TDM Integrated access device (Make: MROTEK, Model -Maple 4c or Similar).Equipped with 4E1 and Extra 4 Empty Slot, 1 Slot should be Populated with 2W/4W E&M Card supporting up to 8 interface and 1 Ethernet port card. Balanced 2 slot empty. Unit support 124 DSO slot cross connect. E&M Module support gain/loss adjustment for LVCD application and also per port configuration as per site requirement. Unit Support both Ac/Dc power supply (ac 230 Dc 24V to 60V).Ac adaptor one no. [Inspection by RITES] | — | — | — | 7,64,640 | |
| — | 2.00 | — | — | ||
| Supply Installation &commissioning of 12 Port LIU Rack mountable. LIU should be provided for terminating theoptic fiber cables. It shall provide minimum bending radius and the splice trays shall function as a splice cover for pigtail splicing. This shall include supply of pigtails. Cable glands shall be provided for secured anchoring of incoming cables.Rubber grommets shall be provided at the cable entry point for tight sealing. The splice tray shall be made of ABS materials.LIU should be of reputed make.(Inspection by Consignee) | — | — | — | 7,254.06 | |
| — | 1.00 | — | — | ||
| Supply 48 ports FXS media gateway. As per RB DoC No. 2022/Tele/9(3)/4 dated 13.09.2022. (Inspection by Consignee) | — | — | — | 98,433.72 | |
| — | 1.00 | — | — | ||
| Supply of 04 ports EI/PRI gateway. As per RB DoC No. 2022/Tele/9(3)/4 dated 13.09.2022. (Inspection by Consignee) | — | — | — | 2,51,285.72 | |
| — | 20.00 | — | — | ||
| Supply of SIP based basic IP phone (Non-executive phone) As per RB DoC No. 2022/Tele/9(3)/4 dated 13.09.2022. (Inspection by Consignee) | — | — | — | 86,520.2 | |
| — | 30.00 | — | — | ||
| Supply of SIP based medium IP phone with minmum 8 DSS (Excutive VOIP Phone). As per RB DoC No. 2022/Tele/9(3)/4 dated 13.09.2022. (Inspection by Consignee) | — | — | — | 3,03,778.8 | |
| — | 10.00 | — | — | ||
| Regulation/Isolation Transformer, Natural Air cooled, Copper Wound with supporting enclosures. Make : Magnetic & Controls (or) AE (or) KAYCEE. Capacity: 4.6 KVA. Input/Output voltage : 230/230Volts +/- 5%. Maximum output Current : 20 A, Regulation : +/-5%. Firm's Offer- Make/Brand-Magnetic & Controls. Other Details As per Chapter VI of tender document. (INSPECTION BY Consignee) | — | — | — | 2,39,398.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022.pdf
ATTACHMENT
GCCCorrectionSlipNo.1.pdf
ATTACHMENT
GCCCorrectionSlipNo.2.pdf
ATTACHMENT
GCCCorrectionSlipNo.3.pdf
ATTACHMENT
GCCCorrectionSlipNo.4.pdf
ATTACHMENT
GCCCorrectionSlipNo.5.pdf
ATTACHMENT
GCCCorrectionSlipNo.6.pdf
ATTACHMENT
GCCCorrectionSlipNo.7.pdf
ATTACHMENT
GCCCorrectionSlipNo.8.pdf
ATTACHMENT
GCCCorrectionSlipNo.9.pdf
ATTACHMENT
GCCCorrectionSlipNo.10.pdf
ATTACHMENT
GCCCorrectionSlipNo.11.pdf
ATTACHMENT
CableVicinitycircular09-2023.pdf
ATTACHMENT
ListofSAFETYCRITICALSIGNALITEMSMANDATORYINSPECTEDBYRDSO.pdf Critical Item Letter
ATTACHMENT
ListofSAFETYCRITICALSIGNALITEMSMANDATORYINSPECTEDBYRDSO.pdf
ATTACHMENT
SpecialIntructionGuidelinesissuedbyCAOCOffice.pdf
ATTACHMENT
Depthofcableletter.pdf
ATTACHMENT
ExemptionfromPVC.pdf
ATTACHMENT
TenderDocument_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].