Renovation of Belmount circuit house at Kasauli Distt. Solan HP SH Providing E.I. there in

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group-C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3x1.5 Sq. mm.

3x4.0 Sq. mm.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm. dia

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 amps switch

2 way 5/6 A switch

3 pin 5/6 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Bell push

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V,50/60Hz, complete with all accessories, connections, testing etc. as required of Approved Make

LED Panel Light 12W Surface

LED Panel Light 15W Surface

LED Panel Light 18/20 W Surface

LED Panel Light 30W Surface

Supplying and fixing of fancy Bed light light ivory fabric shade chrome finishing complete with all accessories including making connections, testing etc. as required. Make: Jaquar ,Philips ,Havells, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing of crystal chandelier for VIP, s having Dia 580mm and height 308mm,of 55 watt suitable for 5 W retrofit LED lamp E14 base complete with all accessories,but excluding lamp including making connections, testing etc. as required. Make Tisva/Jaguar/Philips or make approved by Engineer-in- charge.

Supplying and fixing of 6 lamp chandelier with premium diffused glass chrome finish for Dining having dia 580 mm and height 600 mm,of 30watt suitable for 5 W LED lamp complete with all accessories,but excluding lamp including making connections, testing etc. as required. Make Tisva/Jaguar/Philips or make approved by Engineer-in- charge.

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make

LED Batten Light 20W

Supplying and fixing of fancy Mirror lights for VIP suites containing LED/ CFL lamp holder(s) of all sizes and shapes, complete with all accessories but excluding LED/CFL lamp including making connections, testing etc. as required. Make:Philips , Jaquar , Havells or any other approved by Engineer-in-Charge

Supplying and fixing of fancy Mirror lights for general suites containing LED/ CFL lamp holder(s) of all sizes and shapes, complete with all accessories but excluding LED/CFL lamp including making connections, testing etc. as required. Make:Philips , Jaquar , Havells or any other approved by Engineer-in-Charge

Supplying and fixing of fancy wall bracket suitable for input voltage: AC 220- 240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: of Approved Make

Supplying and fixing of table lamp having fabric shade,crsytal with antique brass finish with height of 710mm,of 9 watt suitable for 9 W retrofit LED lamp E27 base complete with all accessories,but excluding lamp including making connections, testing etc. as required. Make Tisva/Jaguar/Philips or make approved by Engineer-in- charge.

Supplying and fixing of street light 45 W LED IP65, versatile pressure die-cast alluminium IP 65 with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver,complete with all accessories including making connections, testing etc. as required. Make:-C&S, Havells,Philips,Panasonic, SYSKA or any other approved by Engineer-in-Charge.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flatiron with primer and finish paint etc. as required.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: of Approved Make

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Providing, Installation, testing and commissioning of decorative ceiling fan anti dust with regulator for VIP suite, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. Make :- Havells Enticer, or at par in Crompton greaves, Usha, or any other approved by Engineer in charge

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required of Approved Make

Exhaust Fan, Light duty, (Domestic) 225 mm sweep

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Double door-12 Way

Double door-8 way

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.MCB DP 50/63 A 'C' curve

Earthing with G.I. earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 6SWG dia. G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:-

25 Liter capacity water heater (Cat-A)

Supplying and erection floor sub- panel Amp made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 125 Amp. MCCB with 125 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

SITC of 1.5 Ton Hot and cold split type AC( 3/4 star rating) copper condenser including stabilizer and making connections testing etc.complete in all respects.Make ( , Blue Star , LG, Hitachi, O General, Daikin, Mitsubishi, Voltas or any other approved by Engineer-in-charge.

SITC of voltage Stablizer for split type wall mounted Air conditioner including making connections testing etc. complete in all respects. Make:- V-Guard , Voltas , LG, Mitsubishi, Microtek or any other approved by Engineer-in-charge.

Supplying and fixing of Copper refrigerant piping with sleeve 1/2x1/4 inches with control cabling beyond 0 running meter for (Hi-wall split unit) with sleeves insulation etc. complete in all respects with best satisfaction of Er-in-Charge.

Supplying and fixing of PVC drain pipe for (Hi-wall split unit) complete in all respects with best satisfaction of Er-in-Charge.

Supplying and fixing of M.S stand for out door unit of suitable size (Readymade) complete in all respects with best satisfactions of Er-in-Charge.

Supplying & fixing, testing, commisioning of storage type water cooler with reciprocating compressor of ISI marked, environment friendly new age refigerant of rugged stainless steel/ galvanized steel body. Total storage capacity 120 Lt. and cooling capacity 60 Lt/Hr with 2 Nos of faucets and all accessories etc. . Make Usha , Blue Star, Carrier or as approved by Engineer-in-Charge.

Providing and installation of following type of LED retrofit Lamp E-27 holder base with polycarbomate diffuser and aluminium heat sink including connections, testing and commissioning etc. as required. Make:- Philips, Syska, Havelles,C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. Armpoured cable 50 Sq.mm (3.5 core)

Note:- The credit for old dismantled material will be recovered from the contractor on L/S Basis @ Rs. 5000/- only.

Rakesh Kumar

Shyam Radio and Electrical

sai electricals

Bhardwaj Electrical Co.

Nand Ram

Sharma and Company