Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC | L1 | Accepted-AOC Ok | |
| 2 | Not Admitted-Fee/PreQual/Technical/Finance | - | Not Admitted-Fee/PreQual/Technical/Finance Others-Amount |
Tender Value
Refer Docs
EMD Value
₹10,330
Closing Date
14 Mar 2024, 3:00 pmClosed
The Executive Officer, Kalambur Town Panchayat
19/3, Sandhavasal road, kalambur
Construction of Storm water Drain ar Mettukudisai street and Construction of Kariyamedai at Near Nallathaneer kulam in Kalambur town panchayat
2024_DTP_446976_1
210/2024/4
Open Tender
Civil Works
Works
90 days
Kalambur
II and above
2 documents required · 2 mandatory
₹0
₹10,330
Yes
26 Mar 2024
11 Mar 2024
14 Mar 2024
11 Mar 2024
14 Mar 2024
11 Mar 2024
Amount
Drain Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS20B
Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Steel Centering for the Soffits of PCC/RCC works for the following items including cost of all materials, labour strutting, removing etc., as directed by Departmental Officers.
Plain Cement Concrete 1:3:6 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Plastering in Cement Mortor 1:5 Mix (one Cement, five M- Sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Kariyamedai Earthwork excavation in all soils and subsoils except hard rock requiring blasting with initial lead and lift as initial lead of 10.0 m and lift 0f 2.00 m including re-filling the sides of foundation in layer of 15cm. thick watering ramming depositing the surplus earth in the premises as directed by the departmental officers etc., complete complying with standard specification.
Cement concrete 1:5:10 (One cement five sand and ten aggregate ) using 40mm ISS size hard broken granite metal for foundation and flooring including de-watering wherever necessary and laid in layers not more than 15cm. thick to required thickness , including cost and conveyance of materials to work site & labour charges complete with standard specifications
Supplying and filling well gravel in layers of not more than 15 cm thick well watered rammed and con-solidated etc., complying with standard specifications
Brick work In CM 1:5 mix using best country bricks of size 23cm x 11.50cm x 5cm having 350kg/cm2 compressive strength and 15% or less water absorbentin the period of 24hours immersement and confirming to ISI specifications.and using the screened sand and all the materials should be approved by the competent technical authorities etc complete complying with standard specification.
Supplying and erecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over (silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification .
For roof slab beem
Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc,complete as per SS.
Reinforced cement concrete in 1:1½:3 [one cement and one and half sand and four the aggregate ] using 20 mm size IRC grade machine crushed chips and excluding cost of reinforcement and centering works and including the cost of mixing, laying , curing etc.,complete complying with standard specification .
Plain Cement concrete 1 : 2 : 4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS
Plastering in cement mortar 1:3 mix 10mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification
Plastering with CM 1:5 (One cement and Five sand) mix 12 mm thick including finishing cost and conveyance of all materials to work site and all labour charges watering, curing and and all other incidental charges etc., complete complying with standard specifications.
Dadooing the wall glazed tiles of size 305mm x 200mm x 6mm size of approved make and quality and colour 1set in cement mortor 1:2 (one cement and two sand) over 10mm base layer plastering and pointing with white cement neatly as directed.
Paving the floor with plain/design Antiskirt ceramic tiles (colour shade as directed) of size 305mm x 305mm x 6mm in all floors over a base layer of cement mortor 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement
Supplying and fixing in position of best approved colour design and quality FRP sheets of 32mm thick shutter & outer frame of size 65mm x 50mm with neccessary 'U' or 'J' bolts, bitumen washers and cutting the FRP sheets to the required size etc.,complete.
Supplying and laying and jointing of PVC pipes ( 6kg / Sqcm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting, fixing to PVC Specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - wood plugs, PVC clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portion to original condition with necessary brick scaffolding charges .
25 mm dia pvc pipe
32 mm dia pvc pipe
Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated SC .unsheathed cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5 Amps F.T switch with painting of suitable colour for open PVC light point/ Fan point (For Electronic Regulator)5 point per coil)
Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated unsheathed Copper conductor cable of 1100 V grade on suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box 150mmx100mmx75mm for 5A 3 pin non interlocking flush type CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu. tube with PVC unsheathed copper leads from terminals to the fitting
Painting two coats with approved cement paint over one priming coat of cement paint over cement plastered New Wall surface and ceiling including cost of one priming coat, Cost of all materials, all labour charges, brushes etc, complete as per Standard Specification
Supply of GI ' Class Pipe including conveyance of all materials to the site etc., complete as per DPC specification.( As Per page No: 35 of standard Schedule of rates 2017-18 of TWAD board)
a) 32mm Dia (1 1/4" 'B' Class) Pipe
b) 40mm Dia (1 1/2 " 'B' Class) Pipe
Supply, fabricating & fixing in position of M.S door /Windows / Ventilator of required of size suitable to site,condition using necessary 'L' Angles,flats,I sections covered with 18 gauge M.S.Sheet for Door and windows, including costand conveyance of materials,all labour charges for fabrication,fixing with all furnitures fittings etc., complete as directed by departmental officer- Rate/ kg.
Suppling fixing Sintex Tank for 1000 Lt. Capacity including all cost and conveyance charges
Supply and delivery of PVC 32mm pipe including all charges etc. complete
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_532262.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .