SPECIAL REPAIR TO AASTHA COMPLEX BUILDING AT PALAM C/O AFND AND AOR GE (AF) FARIDABAD

Amount

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks (old size bricks), straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

All as per item No 02 above here in but except bricks complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on concrete surfaces such as soft it of RCC slab, chajjas and brick walls etc inck raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick cement plaster in CM 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cenent) incl WPC as per user manual at any height etc complete all as specified and directed (thick cement plaster in CM 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply only liquid WPC complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiliong, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of Plastic emuilsion on wall over one coat of primer over after filling 3 mm thick wall care compound of altek/birla putty on old scraped surfaces or new palsterd surfaces and obtain smooth finish using sand paper etc complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of Plastic emuilsion on wall over one coat of primer over after filling 3 mm thick wall care compound of altek/birla putty on old scraped surfaces or new palsterd surfaces and obtain smooth finish using sand paper etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered surfaces of wall by comp, roof boarder, drops, fins, chajja/ roof facia, column etc and applying two coats of exterior emulsion paint over a coat of acrylic primer including 3mm thickexternal wall care putty of JK/Birla or equivalant complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces by removal of existing treatment and apply on wall by comp, roof boarder, drops fins chajja / roof facia column etc and applying two coats of exterior emulsion paint over a coat of acrylic primer including 3mm thickexternal wall care putty of JK/Birla or equivalant complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors of shade and designed as approved by GE, set and jointed in neat cement slurry and pointed with white cement with coloured pigment to match the colour of tiles 15mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed by Engineer-in-Charge.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors of shade and designed as approved by GE, set and jointed in neat cement slurry and pointed with white cement with coloured pigment to match the colour of tiles 15mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed by Engineer-in-Charge.

M&L Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles of size exc 0.09 sqm but n. exc 0.15 sqm on vertical surface in skirting/ dado, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement, incl dismantling and rubbish off the primises etc complete all as specified and directed by Engineer-in-Charge. Note : Shade and design as approved by EIC/GE.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors dado skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primeses etc complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm but not exceeding 4 Sqm each and complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each and complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any diescription exc 1sqm and n exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

M&L for factory made, 2nd class hard wood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars ) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc size of members of shutters as specified in SSR Part I section 8.20 (a) complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick flush shutters solid core construction with particle board core and plywood face panels commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engineer-in-Charge.

S&F for factory made 35mm thick 2nd class hardwood plain framed panelled shutter two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneerrd particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasond and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

S&F for Factory made solid PVC Moulded Door Shutter with particle board core 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick <oulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawing and as complete all as specified and directed by Engineer-in-Charge.

Providing Kitchen cabinet/cup board shutter/ Partation /Shelves in required size at site made out of 18mm thick MDF board one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2,, thick edge bonding taps or 90 degree edge bent finish as per manufacturers insturctions complete all as specified and directed by Engineer-in-Charge.

M&L for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing and complete all as specified and directed by Engineer-in-Charge.

S&F pressed steel frames of size 105 x 60 mm made of 1.25 mm tiick sheet for doors with one or more rebates including necessary fixing lugs hinges lock strikse plate etc complete all as specified and directed by Engineer-in-Charge.

S&F pressed steel frames of size 125 x 60mm made of 1.25 mm thick sheet for doors with one of more rebates including necessary fixing lugs hinges lock strike plate incl filling hollow of frame with plain cement concrete type BO (1:3:6)( using 12.5 mm graded aggregate etc complete all as specified and directed by Engineer-in-Charge.

M&L for anodiised aluminium framed work for door window / vent (powder coated) aluminium section weighting 0.55Kg/RM with one or more rebated incl jointed cleat for eixing etc complete all as specified and directed by Engineer-in-Charge.

M&L for anodised aluminium powder coated door shutter, aluminium section weighting not less than 0.55 Kh/RM incl necessary 4.8 mm the sheet glass ordinary quality / frosted gllass or ACP shet inck joining with cleats glazing clips rubber packing anodised aluminium snap beading screws handles lock 2 x 150 mm aluminium handles 3 x 100 mm hinges aluminium 2 x 150 mm aluminium tower bolts 1x door stoper 1x Hydralic door closer with each shutter any type incl taking down complete all as specified and directed by Engineer-in-Charge.

M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55 Kg/RM incl necessary 4.8 mm th sheet glass ordinary quality glass/ frosted inck joining with cleats glazing xlips rubber packing, anodised aluminium snap beading,screws, handles, lock, 2 x 150 mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150 mm aluminium tower bolts complete all as specified and directed by Engineer-in-Charge.

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85 mm and fixed with aluminium frame / staples complete all as specified and directed by Engineer-in-Charge.

S&F in repair for MS butt hinges medium weight cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed by Engineer-in-Charge.

S&F for aluminium anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F for aluminium handles cast type anodized 200mm long (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F for 250mm long aluminium alloy anodiised sliding door bolt of 10mm dia with hasp, ( bolt type) and fixing clips of sheet extruded section ad fixing bolts and sliding bolts or extruded sections complete all as specified and directed by Engineer-in-Charge.

S&F in repair, 150 mm ordinary rate tail rid pattern springs inck roller and rubber palte fixed ti chowkhats in repair incl necessary welding if requaried complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of sythetic enamel paint on steel surface including preparaton of old steel surface width or girth exc 10 cm complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10 cm width or girth incl preparation of new surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for nne coats of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for 4.8 mm thick float glass ordinary qality frosted glass and glazing with aluminum beeding and gasket to aluminium frame work in square exc 0.50 sqm in each pane in repair complete all as specified and directed by Engineer-in-Charge.

M&L for 5.0 mm thick figured glass pin head type and glazing with oil putty in squares n exc 9.5 sq m in each pane in repair complete all as specified and directed by Engineer-in-Charge.

S&F steel ventilator made up of box steel sectin of 16 gause MS sheet frame fixed type suitable to fix half portion with cloth and half portion glass with suitable MS beading or flat or oil putty complete all as specified and directed by Engineer-in-Charge.

S&f for galvanised mild steel wire cloth to 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed by Engineer-in-Charge.

S&F for 30 mm continuouos (piano) hingees, mild steel, bright finish or elec trogalvanised complete all as specified and directed by Engineer-in-Charge.

S&F for 100 mm Hasp and staple safety type brsss with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

S&F for aluminium anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F for aluminium handles cast type anodized 150 mm long (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of sythetic enamel paint on steel surface including preparaton of old steel surface width or girth exc 10 cm complete all as specified and directed by Engineer-in-Charge.

Easing and adjusting aluminium door and window including fefixing beading after repacement of defective portion such as door closer aluminium handles hinges locks new rubber gasket aluminium beading preleminated praricle board sheet glass etc complete all as specified and directed by Engineer-in-Charge.

S&F repair of 12 mm thick particle board preleminated on both side decorative choice etc complete all as specified and directed by Engineer-in-Charge.

S&F of Neoprene/EPDM rubber gasket for fixing aluminium door and window shutters etc complete all as specified and directed by Engineer-in-Charge.

S&F of aluminium beading for fixing fo aluminium door and window shutter etc complete all as specified and directed by Engineer-in-Charge.

M&L for viterous china squating pa of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engineer-in-Charge.

S&F in repair of PVC flushing cistern low level white with all accessories of 10 ltr capacity incl flushing pipe brackets and taking down of old CI/PVC flushing cistern complete all as specified and directed by Engineer-in-Charge.

S&F for one piece water closet with bowl for cupled WC with PP soft seat cover, cistern hinges fixing accessores and accessories set of size 650x375x750 mm, 3.S trap outlet with cistern fitting and necessary fixing fitting complete fixed in repairs complete all as specified and directed by Engineer-in-Charge. Make : Jaquar Cat part No: 3S Trap BO9NQ5CBDD or equivalent.

S&F for Toilet paper holder stainless steel fixed with and including chromium plated brass screws and wooden/plastic cleats on walls complete all as specified and directed by Engineer-in-Charge. Make : Jaquar Cat Part No AKP 35753PS or equivalent

S&F for Health fauet brss CP with 8mm dia 1.2 meter long flexible pipe and wall hook fixed with brass chomium plated screws complete all as specified and directed by Engineer-in-Charge.. Make : jaquar Cat Part No ALD CHR 573 or equivalent

S&F in repair for Vitreous China wash basin (Pedestal pattern), White, flat back size 550x400 mm excluding taps waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engineer-in-Charge.

S&f for mirror cabinet PTMT of 450mm x 600 mm with megnetic looking arrangements fixed with and including chromiplated brass screws and PVC rawl plugs complete all as specified and directed by Engineer-in-Charge.

S&F for Towel Rail 00mm long fof PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minium weight 190 grams) complete all as specified and directed by Engineer-in-Charge.

S&F for Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

S&F for Shelf of Cormer glass shelf fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum wight 300 grms) complete all as specified and directed by Engineer-in-Charge. . (Make ESS ESS Cat Part NO AC 207 A or Equivalent

S&F in repair bib tap CP fancy type long body 15mm bore with will crutch or butterfly handle screwed down screwd to iron pipe complete with all fittings complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stop cock / angle CP fancy type 15 mm bore screwed down high presure with crutch to or butterfly handle and screw both end for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stop cock conceald long shank chromim plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed by Engineer-in-Charge.

S&F for wall mixer with provision for overhead shower with 115mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed by Engineer-in-Charge. Make : ESS Cat Part No EC 10 or Equivalent .

S&F in repair hole washbasin mixer wround spout with 375 mm long braided hoses complete all as specified and directed by Engineer-in-Charge.

S&F for sink mixer with regular spout wall mountated with connectings legs and wall flanges and including all necessary fitting complete all as specified and directed by Engineer-in-Charge.

S&F for brass Chromium plated shower roses 125 mm size incl arm with without swivel joints any size including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repair sinks with drainage boarde made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connectionunion to pipe incl sink coupling, 40mm waste fitting overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engineer-in-Charge..

S&F for PVC connections 60cm long superior quality with PTMT nut on both side complete all as specified and directed by Engineer-in-Charge.

S&F in repair for rotational moulded polyetheylene water storage tanks (cylindrical vertical with xlosed top) of 500 ltr capacity, hoisted and fixed in any position incl 20mm dia ball float valve with aluminium fiting, GI nipple any fitting dismantling exising water tank complete all as specified and directed by Engineer-in-Charge.

disconnectin existing tanks exc 250 and n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt, ect from tank and hoisting if required reconnecting and re fixing in same position complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25mm dia of pipe Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20 mm dia of pipe Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F for 20 mm dia Nipple suitabe for HDPE water tank (Minium weight 15 mm 38grams/20mm 45 grams / 25mm 65 gms) complete all as specified and directed by Engineer-in-Charge.

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and hidhg density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repair (Min Wt 20mm - 210 gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm dia Unions brass to connect iron to polyethylene and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20 mm dia Unions brass to connect iron to polyethylene and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25 mm dia Unions brass to connect iron to polyethylene and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair grating round 125 mm size of CP complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel pegset of six suitable size of length complete etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 25 mm dia Decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note the cost of brackets ans knobs is deemed to be incl in the quoted rate. Nothing extra shall be paid in this account complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed by Engineer-in-Charge.

S&F for GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store 20 mm dia bore complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing 20 mm bore medium grade with all fittings and ixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store 25 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing 25 mm bore medium grade midium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F for 110 mm bore PVC pipes single socketed Pressure rating @ 4Kg/Sq cm length 'Medium grade' with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete, incl taking up/down old pipe with all fitting complete all as specified and directed by Engineer-in-Charge.

All as per item No 94 above but laid in trench or in floor complete all as specified and directed by Engineer-in-Charge.

S&F for 110 mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore PVC bends/ junction any radius complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm bore PVC pipes single socketed Pressure rating @ 4 Kg/Sq cm length "Medium grade" with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 meters length complete, including taking up/down old pipe with all fittings complete all as specified and directed by Engineer-in-Charge.

All as per item No 98 above but laid in trench or in floor complete all as specified and directed by Engineer-in-Charge.

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed by Engineer-in-Charge.

S&F for 75 mm bore PVC reducers complete all as specified and directed by Engineer-in-Charge.

S&F In repair for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 75 mm bore PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete unreinforeced in ground floors and paving n exc 15 cm thickness below or above ground level, concrete debris and rubbish to a distance n exc 100m complete all as specified and directed by Engineer-in-Charge.

M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg.) as in plinth protection/path/any paved area complete all as specified and directed by Engineer-in-Charge.

M&L for taking down existing roof treatment of any description and any type complete all as specified and directed by Engineer-in-Charge.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, incl brushing neat cement slurry with 3 Kg of cement per sq meter etc complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick in CM 1:4 on of brick work or concrete surfac finish ever and smooth (w/o using extra cement) incl WPC as per user manual at any height etc complete all as specified and directed by Engineer-in-Charge.(WPO will be measured and paid separately).

Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of roof surface and applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 mm complete all as specified and directed by Engineer-in-Charge.

M&L for Chiken wire mesh of size 12.5 mm and wire dia 0.51 mm (24 SWG) hexagonal construction, stretched firmly for roof treatment, complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) for roof pedding, finish even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified and directed by Engineer-in-Charge.

S&F door plain gypsum board panel 12.5 mm thick on ceiling with and incl necessary GI frame usied with 'T' or any section accessories etcof galvanized steel all as per manufacturer design conforming to IS 2095 and 2542 (1981) the weight of the board shall be not less than 7 Kg per sqm incl dismantling of walls and ceiling board any type and two coat of OBD over a coat of putty complete all as specified and directed by Engineer-in-Charge.

Dismentling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings complete all as specified and directed by Engineer-in-Charge.

S&F for pre-painted galvalume aluminium zindc coating GI based corrugated steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

S&F painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

Dismentling of polycarbonated sandwitch type sheets complete all as specified and directed by Engineer-in-Charge.

S&F 6.00 mm thick polycarbonate sandwitch type sheets in semi circle shape on roofs of desired colour and fixed with aluminium metal flat/ angle/ tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tightening screws of reputed quality and make complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above ground level, concrete debris and rubbish to a distance n exc 100m complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring and complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shpe and size confirming to IS 15658- 2006 of 60 mm thickness, with grey cement, pigment complete all as specified and directed by Engineer-in-Charge.

M&L for except tiles machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 of 60 mm thickness, with grey cement, pigment complete all as specified and directed by Engineer-in-Charge.

M&L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in nest cement slurry, incl dismantling complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for wind tie complete all as specified and directed by Engineer-in-Charge.

S&F for roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410-W Gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge.

Eration fixing only for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410-W Gde-E-250) quality - A complete all as specified and directed by Engineer-in-Charge.

S&F for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161- 1979 grade St - 240 complete all as specified and directed by Engineer-in-Charge.

S&F for rolled sections as in main and cross beams, hip and jack rafters, truss, purlins where connected to common rafters and running rails, cleat or other conneting plates cutting, welding including Nut Bolts, Fe 410-W(Gde - E- 250) quality A complete all as specified and directed by Engineer-in-Charge.

All as per item 130 above here in before but fixing only complete all as specified and directed by Engineer-in-Charge.

S&F for expanded metal, cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied and fixed complete to wood or steel member weight exc 4 kg per Sqm incl dismantling expanded metal, any thickness or mesh, fixed with steel or wood filets, if any complete all as specified and directed by Engineer-in-Charge.

M&L for Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings, framework of water tanks and similar work conforming to Fe 290 Gde-E-16, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed by Engineer-in-Charge.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR and complete all as specified and directed by Engineer-in-Charge. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls..

All as per item No 135 above but 5 Amp socket outlet, independent complete all as specified and directed by Engineer-in-Charge.

All as per item No 135 above but on the same board complete all as specified and directed by Engineer-in-Charge.

All as per item No 135 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable complete all as specified and directed by Engineer-in-Charge.

All as per item No 135 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame, 1 module complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame, 3 module complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame, 6 module complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame, 8 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush boxes 1/2 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush boxes 3 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush boxes 6 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush boxes 8 module complete all as specified and directed by Engineer-in-Charge.

M&L modular switch 1 way 6 A, 1 module complete all as specified and directed by Engineer-in-Charge.

M&L modular bell push switch, 6 A, 1 module complete all as specified and directed by Engineer-in-Charge.

M&L modular socket, 6A-2/3 pin combined, 2 module complete all as specified and directed by Engineer-in-Charge.

M&L modular Switch 16A, 6 pin, 3 module complete all as specified and directed by Engineer-in-Charge.

M&L modular Socket 16A, 6 pin, 3 module complete all as specified and directed by Engineer-in-Charge.

S&F modular fan step regulator, 120W -2 module complete all as specified and directed by Engineer-in-Charge.

S&F bell Multi music AC 230Volts single pole complete all as specified and directed by Engineer-in-Charge.

S/fix ceiling rose,3 phase/PVC/Polycarbonate,isolated body after dismantling old one complete all as specified and directed by Engineer-in-Charge.

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 2 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length) complete all as specified and directed by Engineer-in-Charge.

Supply and fix Decorative, wall mounting fixture with plastic body suitable for 9 W LED lamp B22 base complete all as specified and directed by Engineer-in-Charge.

S/Fix in replacement MCB DB TPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar with incomer as 4 pole MCCB 240/430V for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sheet metal enclosures DB Double door type 8 way SPN 240 volt including 200 Amps rated bus bar with neutral link complete all as specified and directed by Engineer-in-Charge.

Supply and install in replacement MCCB TPN fixed type 100 Amps rated with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge.

S/Fix in replacement MCB DB SPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one.

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories complete all as directed by Engr-in-Charge.

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x9 watt comprising of strong jointless CRCA body complete with all accessories complete all as directed by Engr-in-Charge.

Supply and fixing bed-side wall mounted LED 4 W 3000k fiiting with luminaire with high efficienc LED and clear diffuser IP20 complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of MCB SP 6 to 32 amps 230 Volt complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of MCB SPN 32 Amps 230 Volts complete all as specified and directed by Engineer-in-Charge.

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper complete all as specified and directed by Engineer-in-Charge.Note : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

Supply & fixing in replacement of SPN enclosure with two pin and earth plug and socket complete with on SP MCB 20 Amps complete all as specified and directed by Engineer-in-Charge.

Taking down Geyser of any type / any capacity single phase , 230 Volt all as per specified and as directed by Engineer-in-charge.

M&L for refixing/ re-installing Geyser any type / any size with all electrical and plumbing connection complete in all respect all as per specified and as directed by Engineer-in-charge.

M&L for Removing existing hot & cold water copper/PVC flexible pipe connection from geyser and S&F new brass chromium plated water connection pipe with brass nut and washers of good quality about 45cm long in hot & cold water connections and connecting complete all as specified and directed by Engineer-in-Charge.

M&L for Replacement of heating element 1.5 kW for 35ltrs capacity geyser ISI marked.complete all as specified and directed by Engineer-in-Charge.

M&L for Replacement of thermo static switch of geyser complete all as specified and directed by Engineer-in-Charge.

M &L for welding with new brass studs for holding of heating element with replacement of suitable element holding clamps-3 nos. complete all as specified and directed by Engineer-in-Charge.

M &L for replacement of indicating bulb of geyser complete all as specified and directed by Engineer-in-Charge.

S&F in repairs apparatus plate bottom cover in two halves made out of GI sheet duly painted all as directed by Engineer-in-Charge.

S&F water heater outer cover suitable for 25ltrs. Capacity of existing make including taking out old unserviceable complete all as specified and directed by Engineer-in-Charge.

S& F geyser assembly including gasket and nuts and bolts complete with fixing arrangement complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of water storage tank of suitable for 25ltrs capacity incl glass wool complete all as specified and directed by Engineer-in-Charge.

M& L for taking down and refixing ceilling fan , exhaust fan of any type and rating on any surface complete all as specified and directed by Engineer-in-Charge.

M& L for taking down and refixing light, socket, bell or power point of any type and rating on any surface complete all as specified and directed by Engineer-in-Charge.

Taking down pressure pump motor of capacity upto 1 HP, single phase ,230 Volt complete all as specified and directed by Engineer-in-Charge.

M&L for refixing presume pump motor of capacity upto 1 HP single phase , 230 Volt complete all as specified and directed by Engineer-in-Charge.

PAWAN KUMAR

Commercial Traders

GIR RAJ BUILDERS

Singh Associates

MAA BHAWANI CONSTRUCTION

High Tech Metal India