Repairing and Maintenance of High Tension Switch gear 3.3 kV (panel) at Kadwa Pumping station with Repairing 470 HP V T Motor And pump set And starter (VCB ) HT control Panel and Repairing And maintenance of 2000KVA Distribution Transformer

Repairing & Maintenance of High Tension Switch Gear 3.3 KV (Panel) At Kadwa Pumping Station Sinnar Nagar Parishad, Sinnar, Dist.Nashik.1) Repairing of 470 HP V T Motor & Pump Set & Starter (VCB) HT Control Panel.2) Repairing 2000 KVA Distribution Transfarmer with on Load Tap Changer (OLTC)

Repairing of (VCB) starter in control panel for 500 HP V.T. Pump Volt 3.3 KV. Capacity which included spiring tention adjustment set, gear setting new lock with cleaning, general cheking and overhauling and servicing as per starter (VCB) etc. complete (with two time visit on site)

Hardwear Rubber Packing, SS Nut, Nut Bolt, Lug,Gland, Wd-40/DC2-26 spray etc. complete.

Providing & Filling of oil for OLTC with ours site.

Providing & fixing of spring charging motor 240 AC, 50 Hz Volt suitable for L & T make VCB (Starter)

Providing & Fixing of Master Trip Relay for motor protection with TNC switch and other switches.

Providing & Fixing of Digital Motor Protection Relay. As Per Required.

Providing & Fixing of Voltage Protection Relay. As Per Required.

Providing & Fixing of Motor Protection Supervision Relay. As Per Required.

Providing & Fixing of Anti Pumping Device As Per Required.

Providing & Fixing of CT Coil for 470 HP Motor 3.3 KV. As Per Required.

Providing & Fixing of H T Buth For Voltage Protection & Connect to Panel, Motor & Other

Providing & Fixing of High Voltage HRC Fuse 160 A. 3.3 KV. As Per Required.

Repairing of Control Panel Wiring with AC/DC control & Device, Swithces & Other Ele. Product etc. completed with Testing Panel.

Providing & Fixing of Rack in Rack out mechanisms suitable for VCB (Starter) make L & T. As Per Standard.

Providing & Fixing of main moving contact Assembly. As Per Required.

Providing & Fixing of Resistor moving contact Assembly. As Per Required.

Providing & Fixing of fix contact Assembly. As Per Required.

Providing & fixing of suitable oil seal As Per Standard

Providing & Fixing Gasket for Top Plate.

Providing & Fixing of epoxy ARM As Per Required.

Providing & Fixing of Transistor Resistor Assembly. As Per Required.

Providing & Fixing of copper Tube As Per Standard

Providing & Fixing of New Hardwear with Braded wire. As Per Standard

Providing & Fixing of common connecting ring As Per Required.

Providing & Fixing of Tap No. 13 Coper bar including (L) pice. As Per Required.

General servicing & ovarhauing of (OLTC) which included cleaning of contact, copper tubes, Draining old shade, connection Retightening, Greecing of All gears & General checking as per our site OLTC with Test & Trial complete.

Providing & Fixing of Tripping Coil or closing coil.As Per Required.

Removing of failure Transformers for repairing purpose with transport Truck Trellar & Crean from site to Sambhajinagar.

Rewanding of 2000 KVA (11 KV/3.3 KV) Transformers As per Standard Design with HV & LV copper coil wound/replace, with standard insulation material Gaskets, Hardware, HV & LV Metal Rod, Bushings, Breather, Heating, Warnishing, Painting, Buchholz Relay etc. complete. (Including Old Copper Wire)

Lab Testing of 2000 KVA (11 KV/3.3 KV) Transformers on site for winding analysis.

Refitting of Transformers for is a completed. New wounded (Rewinding) with Transport Truck Trellar & Crane with from Sambhajinagar to Site Delivery etc. Complete Test & Trial Job.

Supply of Transformers oil per liter.

Fitting of Stand by Transformer 1000 KVA/ 11KV/3.3 KV with Crane, Test & Trial etc. complete.

Supply of 11 KV Ele. Insulation Mat ISI Mark for use of HT Control Panel.

Rewanding of 470 HP Induction Motor Capacity (350 KW/470 HP) with standard coper winding wire class H insulation High Temperature/3.3 KV (Including Old Coper Wire)

Supplying and erecting of bowl assembley stenar as per company

Supplying and erecting of Bronze bearing as per requirement.

Supplying erecting of Bronze neckring as per requirment.

Supplying erecting Bowl assembly S.S. Shaft Grade 431 as per size.

Supplying and erecting water lubricated (NBR) bush bearing as per size with metal set.

Supplying and erecting of shaft sleeve (Grade 431) as per size.

Maching of bowl impeller

Providing and fixing column pipe nut-bolt as per size for 01 column pipe joint.

Repairing of old shaft with welding, threading, balncing, finishing, cutting, machining etc. complete.

Removing shaft sleeve from line shaft

Providing and fixing new line shaft (Grade 410)

Removing of failed complete V.T. pumpset from jackwell with motor with transport and labour.

Reffiting of Repair Complete V.T. Pumpset from jackwell with motor with Testing with transport and labour.

Removing of failed V.T. pumpset motor part only with transport and labour.

Refitting of V.T. Pumpset motor part only with testing with transport and labour.

Overhauling of TEFT motor with Heating greesing survising and warnishing etc. complete.

Cleaning of motor, bowl assembly, column pipe etc. with paint.

Removing bowl assembly for repairing purpose at contractor's then refitting bowl assembly etc. complete.

Supplying and erecting of V.T. Motor thrust bearing make SKF, FAG.

Supplying and erecting of V.T. Motor ball bearing make SKF/FAG.

Supplying and erecting of glan rope, Pu tube valve, rubber sheet and hardware.

Machine of column pipe with both ends side face surface etc. complete.

Supplying and erecting of tuffing box bornze bush as per required size.

Supplying and erecting of tuffing box shaft spacer sleeve (Grade 431) as per required size.

Supplying and erecting of 20/40 no oil for motor/Auto.

Supplying and erecting of spaydar as per size

Supplying erection of tuffing box thrust bearing make SKF/Fag.

Balancing of 470 HP Motor Rotor for Balance Thruout, Cheaking & Measure of bearing dia.

Providing & Fixing of Central Motor & Pump Drive Cuple with nut bolt and bushing.

Please Enable Macros to View BoQ information