Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC BX 167 4 ISHWAR NAGAR PATHANKOT PUNJAB 145001 UDYAM PB 16 0001334 03AALFR1593C1ZE B R | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹34.7 L+₹1.5 L (4.54%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹35.6 L+₹2.4 L (7.09%)Rejected-Finance | L3 | Rejected-Finance Not Lowest |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
26 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) PATHANKOT
GE (SOUTH) PATHANKOT
CERTAIN REPAIR WORKS TO MD AND OTM ACCN AT MIRTHAL AREA UNDER GE SOUTH PATHANKOT
2022_MES_571815_1
GES/PKT/T-55/2022-23
Open Tender
Construction Works
Item Rate
180 days
GE (SOUTH) PATHANKOT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (SOUTH) PATHANKOT
₹60,000
Yes
21 Feb 2023
28 Dec 2022
28 Jan 2023
28 Dec 2022
26 Jan 2023
12 Jan 2023
Amount
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per sqm. complete.
M&L for 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces, finished even and fair to receive treatment on roof complete all as specified and directed.(WPC will be paid separatly)
Supply only water proofing compound
Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermply non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing). In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)
Demoliton of cement conc of any description in any position not specifically provided for, all as specified.
M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in padding over roof slab for providing proper slope 1:40 and approx thickness 75mm or less and finished the surfaces even and smooth wihtout unsing extra cement complete all as specified and directed.
Supply and fixing in repairs CP wall mixture, valve cast copper alloy fancy type for mixture hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified.
Dismantaling of old brick tile as in roof traetment and Cleaning of existing treatment of any description completely & washing rubbing with water
M&L 40mm thick brick tiles laid on cement mortar 15mm thick in CM 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.
All as per item No 9 but except brick tiles laid on cement mortar 15mm thick in CM 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.
Clean existing reinforcement with wire brush/rotary wire brush to make surface free from rust scales, loose material, dirt etc complete and providing applying two coats of rust remover and two coat of alkaline rust converting primer/zinc primer and form a corrosion resitant, insoluble and adherent protective layer, including form work and scaffolding for cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 1 hour between the coats use.
In Column/Wall
(ii) In Beams
(iii) In Slab/roof projection
Providing and applying, brush application, curing to form anticorrosive with high bond strength of anticorrosive polymer modified cementitious coating for corrosion inhibiting protection of reinforcement in one layers of total thickness of 2 mm.
(i) In Column/Wall
(ii) In Beams
(iii) In Slab/roof projection
Rebuilding the section of damaged RCC elements to its original size or as directed by Engineer-in-Charge in thickness exceeding 40 mm but not exceeding 100mm by providing and casting with pre-packed dual shrinkage compensated micro concrete of minimum grade of M40 and above including providing and fixing of watertight foam faced finish shuttering all lead and lift mixing placing, deshuttering, levelling the surface by grinding off cementitious slurry of construction joints of differences in any to satisfaction of Engr-in-charge, curing and necessary scaffolding etc, complete all as specified.
In Column/Wall
In Beams
Rebuilding the section of damaged RCC elements to its original size or as directed by Engineer-in-Charge in thickness not exceeding 60 mm in layers of min thickness exceeding 20 mm and avg thickness 40 mm each by providing and applying ready mised duel shrinkage compensated thixotropic mortar (PMM) of minimum grade M40 and above, including all lead lift, mixing by addition of water only as per manufacture's recommendation, levelling the surface, curing, form work and necessary scaffolding etc complete all as specified.
In Slab/ roof projection
Demolition of brick work stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for brick work in cement mortar 1:6 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed.
All as per description of item 16 above but except bricks complete all as specified and directed
M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.complete all as specified and directed
Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed.
Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each complete all as specified and directed.
S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats complete all as specified and directed.
S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats complete all as specified and directed.
Preparing the new steel surfaces of any description over 10cm width or girth priming with red oxide zinc crome and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life)
S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.
S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire mesh etc sizes of members as per clause 8.20(a) of SSR Part-I complete all as specified and directed.
Preparing wood or wood based new or untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
S&F in repair 150mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed.
S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked complete all as specified and directed.
S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed.
S&F 75mm long butt hinges medium weight cold rolled ISI marked aluminium complete all as specified and directed.
S&F in repair aluminium body door closer hydraulically regulated designation No 3 universal type of dia cast body, suitable for door shutter for taking weight up to 80kg complete all as specified and directed.
Refixing Aluminum frame with suitable rawl plugs with brick/concrete wall all as per direction of Engineer-in -charge including finishing Jams surface with existing wall surface all as specifed.
Refixing Aluminum shutter of any dscription exc 1.00 Sqm n exc 2.50 sqm each after Easing and adjusting by opening all side members and refix with cleats and screw in true alignment including existing fitting/fixtures as in the same opening complete with Aluminum frame all as specifed & directed
Hacking out old broken glass (any thickness,size,quality or description) from wooden frames,glazed with putty or fixed with beads complete all as specified and directed.
S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed.
S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; including SS spreder, flush pipe waste pipe.
S&F in repair Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Dismantling of wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises,M&L for providing glazed ceramic coloured wall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises,M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises, M&L vitrified ceramic tiles 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & gressy spots etc and applying two coat of cement base paint on wall including curing after applying each coat complete all as specified & directed by Engr-in-Charge.
Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water,M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement mixed with including scaffolding at any height including two coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water, M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement includingPreparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets. S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back availabel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 2 to 3 mm dia GI bar hanger from the purlins of the roof with butter fly clips
Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe,S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length complete all as specified and directed.
Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe,S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls complete all as specified and directed.
Dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site ,S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20/25mm high pressure with polyethelyne float and fly nuts complete all as specified and directed.
Dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing from site,S&F Rotational moulded polyethelyne water storage tank three layered(cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20/25mm high pressure with polyethelyne float and fly nuts complete all as specified and directed.
S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified
S&F in repair 25mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified
S&F in repairs vitreous china wash down water closet (pedestal pattern) including fixing bolts and connecting to drain pipe including seat cover plastic flat bottom and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed.
S&F in repairs vitreous china squatting pan, Orissa pattern size 580mm x 440mm with integral foot rest including provision of lime concrete bedding, connection to drain out pipe and to flush pipe, anti-syphonage pipe etc complete including making good the disturbed flooring of existing specifications complete all as specified and directed.
S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand over 10mm thick rendering in cement mortar 1:4 mixed with liquid water proofing admixture of approved brand complete all as specifed & directed.
M&L for 1:5:10 type E2 cement concrete in foundation , filling and mass concrete complete all as spd and directed
S&F in repair vitreous china wash hand basin (flate back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed.
S&F in repairs 10 litres PVC low level flushing cistern syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.
S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.
S&F grating round 100 mm size of stain less steel as in repair, complete all as specified and directed.
S&F in repair bib taps long body, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified & directed by Engr-in-Charge.
S&F in repairs 15mm bore Angle valve fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.
S&F in repairs 15mm bore stop valve chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe complete all as specified and directed.
S&F in repair pillar tap chromium plated fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.
S&F in repairs chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
Supply & fixing in repair of CP health faucet with 1.20mtr flexible tube &hook fixed with and incl CP screws complete all as specified and directed.
Supply & Fixing in repair Stainless steel Plate rack 1mm thick of size 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as specified and directed.
S&F in repair Cabinet Mirror of size 400mmx500mmx6mm thick with frame as Prayag or technocommercial equivalent complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed
Demolition of cement concrete unreinforced of any description in any position not otherwise specifically provided for complete all as specified and directed
M&L for PCC (1:3:6) type C-2 using 20mm graded crushed stone aggregate as surface channels drain and post holes, coping etc including necessary form work complete all as specified and directed.
S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed.
M & L for hard core broken stone of gauge n.exc 63 mm deposited , spread and levelled in layers n.exc 15 cm thick, watered rammed to a true surface complete all as specified and directed.
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Chequered cement concrete coloured, table vibrated chemical coated, tiles 300mm x 300 mm x 25 mm thick table set and jointed, pointed in neat cement slurry with grey cement and no pigment as in floor,Screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed.
M&L 75mm thick PCC, type B-1, 1:3:6, ( using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement complete all as specified and directed.
M&L for preparation of surfaces by leveling/edging of the disturbed planes/edges of old/new plastered surfaces of wall by using wall care putty of 1 mm thick on vertical surfaces to true vertical and horizontal lines of bricks/ concrete walls finish to even and smooth with two coat of oil bound distemper on wall complete all as specified and as directed
S&F for SS Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete.
Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed.
S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficent number of Iron stack clamp complete all as specified and directed.
S&F for 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.
S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.
S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.
S&F for 75mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.
S&F of 75mm bore PVC (SWR) branch pieces (single Y) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F of 110mm bore PVC (SWR) branch pieces (single Y) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F of 75mm bore PVC (SWR) junction (single T) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F of 110mm bore PVC (SWR) junction (single T) equal or unequal jointing with solvent cement complete all as specified and directed.
Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specifed and directed.
S&F in repair 32mm bore corrugated PVC waste pipe complete
S&F CP Soap Dish fixed with and incl CP screws of as approved.
S&F in repairs stop valve concealed fancy type, long shank and cup (ISI marked) brass chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for union bore pipe of 15mm dia.
S&F in repair curtain rod 25mm dia pre-painted synthetic enamel paint of finishes fixed with screws
S&F in repair bracket prepainted with screw, hole suitable for 25mm dia rod fixed with screws and gutties in wall.
All as per above here-in-before, but end caps with wall ornament and fixed to curtain rod with screws of design/shape all as specified and directed.
Taking down of old PVC wall lining, preparation of surface, S&F solid PVC Wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawings complete all as directed by Engineer-in-Charge
Taking down of old PVC sheet fillets, S&F 5 mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as directed by Engineer-in-Charge
Dismantling wrought iron or mild steel work of any description.
M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240.
Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in Concrete round.
Excavation in post holes (or similar holes) each nexc 0.5 cu.m, getting out getting out in soft/loose soil
M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165
Supply of MS galvanised chain link fencing mesh any size all as per directed by Engr-in Charge
Fixing in only chain link fencing of any size including line wires, any mesh size and type to any type of standards, rails, straining bolts etc. including provision of binding wire.
M&L in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
M& L for re-securing of angle iron post of any size including seprating old concrete and excavation for post holes for iron post
Dismantling of Asbestos cement (Corrugated, semicorrugated, etc) sheets in roof coverings, M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Sheet colour approved by Engineer-in-Charge complete all as specified and directed.
M&L pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws as specified.
S&F in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
M&L for remove all loose gravel cement mortar, dirt, oil, grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminous material manually and with heal torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks with highly elastic bituminous cold applied putty tarplasic-- having penetration after setting upto 8mm Levelling of surface to give proper slope will be done as per site requirements with Shalipatch cold applied, Bituminous Motor & Cold emulsion cum waterproofing liquid--- Shalikote T-10, Created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make of approved by GE mixed with portable water in the ration of 1:1 and apply @ 400gm per Sqm (As per surface conditions). Apply first coat of Tarfelt LM or equivalent make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no dilation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. * Lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. * Allow the first coat to dry for 10 to 12 Hrs. * Apply 2nd coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller. * Allow it to dry for 10-12hrs after apply 3rd coat with consumption @ 700gm per Sqm.
Ensure final curing time of 36 hrs before allowing/carrying out any further work,. Conduct ponding test after min 7 day applying two coats of U V Resistant Elastomeric Exterior Acrylic Weather resistant water proof coating of Shalicryl-215 or equivalent make of approved by GE having elongation of 300% after curing of 14 days conforming to ASTMD-6083—for U V Protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membrane of Tarfelt LM or equivalent make of approved by GE to give long life and prevent its deterioration from sunlight.
Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.
BUILDEX CONSTRUCTION CO
M/s gurdial singh and co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .