Upgradation and Strengthing of Joint Commissionar Office Aligarh

Dismentling doors and window leaves excluding chawkhats including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 mts. DSR No-5.12.2

Dismantling Reinforcement cement concrete including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 mts. DSR No-15.3

Dismentling Brick work

Cleaning of Disposal malwa Distance 3 KM……….Complete item.

E/W in excavation in foundation in ordinary soil lift upto 1.50 mt……….complete item.D.S.R No2.2.1

Cement Concrete with 4 cm. Gauge approved stone aggregate ,fine sand &cement in proportion of 8:4:1 ……………..complete item. D.S.R No-4.1.8

M-150 brick work in 1:6Cement & C. Sand Mortar in below plinth beam…Complete Item.DSR No-4.1.8A

R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Column , but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the work including cost of binding wire.DSRNo-5.1.2

M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item. DSRNo-5.22.1

Class 150 brickwork in 1:4 cement mortor in Super structure DSRNo-6.1.1

12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete,DSRNO-13.1.1

Providing and fixing tiled false celling 12.5 mm fully perforted Gypsum Board tile made for plasterboard having glass fiber conferming IS-2095and consisting of angle cleats of size 25mm wide x 1.6mm thick with flange of 27mm and 37mm at 1200 center to center etc all complete (DSR 12.52.1)

Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete.chapter 15 serial no-31

Distempring with 1st qualityAcrylic distemper(ready mix) including all materials labours T&P etc all complete.DSRNO-13.41

Finishing wall with two coat of acrylic smooth exterior paint of best quality including all materials, labours, T&P etc all complete. (DSRNO-13.47.1)

Providing and fixing of 100mm dia PVC rain water pipe with PVC bend and shoe etc all complete.

Providing and fixing factory made UPVC White colour casement cumfixedglazed windows comprising of UPVC multi chambered frame,sash and mullion(where ever required)extruded profile duly rien force with 1.60+_0.2 mm thick……etc all complete.DSR /PED Spec.No-9.147A

Providing and laying 600x600mm vitrified tiles with 20 mm thick cement mortar….complete item DSRNo-11.41.2

Providing and laying Polished Grinite stone flooring in required design and pattern 18 mm thick base of cement mortar1:4 (1cement :4 coarse sandmortar….complete item DSRNo-11.56.1

38 MM THICK WOOD BLOCK FLOORING…...COMPLETE ITEM DSR 11.34

M.S. or iron work in small size sections as in grill……complete item sch-10.1

Providing and fixing 35mm thick flush door shutter as per requirement with an average wall thickness of 1mm etc all omplete. (DSR 9.21.1)

Providing and fixing in 25 mm thick Wall Lining midium density fibre boardIS:14587:1998 marked ,Prelaminated one side decorative lamination and other side balancing lamination with necessary fixingarrengement and screw etc completed.(DSR 9.158.3)

Painting 2 coat of approved superior quality ready mixed enamel paint on previously painted old wood or steel work including all materials, labours, T&P etc all complete. (DSR No-13.48.2)

Prviding and fixing ISI marked MS heavy weight butt hinges (125mm) with necessary screw etc all complete. (DSR 9.56.1)

Prviding and fixing ISI marked Oxidised MS sliding door bolts (size 300x16mm) with necessary nut and bolts etc all complete. (DSR 9.62.1)

Prviding and fixing ISI marked Oxidised MS tower bolts (size 250x10mm) with necessary screw etc all complete. (DSR 9.63.1)

Prviding and fixing ISI marked bright finished brass floor door stopper with necessary screw etc all complete. (DSR 9.82)

Providing and fixing aluminium die cast body tubular type universal door closer (IS-3564) with necessary acessories and screw etc complete. (DSR 9.83)

Providing and fixing of Cartain on window including all fixtures and arrangement etc all complete.market rate

Providing and Injecting chemical for pre -constructional antitermite treatment work etc.including supply of all materials, labours and T&P etc all complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (DSR 18.8.4)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. (DSR 18.8)15mm nominal outer dia pipes

20mm Nominal outer dia pipes

25mm Nominal outer dia pipes

Providing and fixing of following dia U-PVC pipeType-B Supreme class ISI marked pipe lines :160mm dia

110mm dia

75mm dia

Providing and fixing SWR PVC plain bend of required degree.160mm dia

110mm dia

75mm dia

Providing and fixing SWR PVC junction Tee of required degree.160mm dia

110mm dia

75mm dia

Providing and fixing of SWR PVC Nahani trap etc all complete.75x110mm

Providing and laying Kajaria or equivalent brand floor tiles over 20mm thick base of cement mortor (1:4) laid and jointed with white cement slurry.

Providing and fixing 25mm thick PVC flush door shutter made out of one piece multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm etc all omplete. (DSR 9-118-3)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR 17.1.1)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1)

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre &operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitablewater inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (DSR 17.80)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (DSR 17.7.8)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. (DSR 17.16A)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia (DSR 17.32.1)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : (DSR 18.49.1)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (DSR 18.53.1)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17.1)25 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15mm nominal bore (DSR 18.21.2.1)

Providing and Fixing of Stainless Steel (Grade 304) railling made of hollow tubes,channel,plates including drilling holes,revetting or welding where nessessary and also including supply of steel ….complete item DSR NO.10.28

Constructing brick masonry manhole in cement mortar 1:4 with R.C.C. top slab with 1:2:4 mix , foundation concrete 1:4:8 mix, inside plastering 12mm thick with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : (DSR 19.7.1)

Centering and shuttering including strutting, propping etc. and removal of form for…complete item

Providing and laying of brick coba average 120mm thick 1:4 cement coarse sand mortar including supply of all materials, labours and T&P etc all complete.

Earth work cuttting/ filling with cartage 3 km…………..complete item.Dsr no-2.25A

Excavation earth work…complete item DSR No-2.2.1

12MM THICK CEMENT PLASTER WITH 14 CEMENT AND SAND MOTOR ON FAIR SIDE OF WALL INCLUDING ALL MATERIAL, LABOURS , T&P ETC ALL

Brick work 1:4 cement and c.sand mortar…complete item DSR No-6.1.1

Providing and laying of 20 mm thick( kota stone ) base laid over over and jointed with gray cement slurry mixed with pigment to match the shed of the slab,including rubbing and polishing complete with base of cement mortar 1:4(1cement :4 coarse sand)DSR No-11.26.1

Dismentling brick work and stacking of dismantled materials as directed by Engineer-in-charge with distance of 60 mts. …….. Complete item.DSR No-15.7.4

Brick work 1:4 cement and c.sand mortar…complete item DSR No-6.1.1

Providing and fixing of 100mm dia PVC rain water pipe with PVC bend and shoe etc all complete.

Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete.chapter 15 serial no-31

Providing and laying Polished Grinite stone flooring in required design and pattern 18 mm thick base of cement mortar 1:4 (Icernent 4 coarse sandmortar...complete item

Providing and laying of brick coba average 120mm thick 1:4 cement coarse sand mortar including supply of all materials, labours and T&P etc all complete,

Less 5% of Department

Please Enable Macros to View BoQ information