REPAIR TO AC SHEETS, MANGALORE TILES, ROOF TREATMENT, JOINERY, FLOORING, SUNKEN FLOOR OF KITCHEN TOILETS, PLASTERING, PLUMBING, SANITORY FITTINGS AND SERVICE TANK CLEANING TO CERTAIN BLDGS AT MH AREA UNDER AGE BR S NO I OF GE SOUTH SECUNDERABAD

Amount

Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cementolaster and exposing the top surface of RCC slab incl removing the dismantled debris to a distance exc 200m & n. exc 250m complete all as specified and as directed

M&L prime the surface with shaliUrethane BTD@400 gms m2 / Kg 1.e the ratio of 1:1 (BTD :water) and allow it to touch dry. Apply 1st coat of shaliUrethane [email protected] Kg per m2 by bruch / roller while the primed surface is tacky. Apply 2nd coat of shaliUrethene BTD 1.2 Kg per m2 by bruch /roller. Allow1st to dry for 10-12 hours. Extend water proofing treatment up to 200 mm and terminate into groove on the parapet wall fill the groove with PMC mortar complete all as specified, as directed and as per the manufacturers instructions.

S&F rotational moulded polyethylene water storage tanks 500 ltrs(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling of existing damaged water tanks.complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling of existing damaged water tanks.complete all as specified and as directed.

S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed to iron pipes.complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore complete all as specified and directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,15mm bore.including taking down old pipe complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall including breaking up drain AC pipes/PVC pipe set in cement mortar complete all as specified and as directed.

Dismantling timber scantlings in unframed work 40 sq. cm and over in section fixed in any position complete all as specified and as directed.

S&F Rolled sections of grade Fe 410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.

S & F 6mm thick AC corrugated sheets in roofs walls etc fixed with J- type hooks & bolts complete all as specified and as directed.

All as per item 13 above but Except AC Sheet complete all as specified and as directed.

S & F 6mm thick Ac two piece serrated Ridge for corrugated sheets fixed with J-type hooks and bolts complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqn each.complete all as specified and as directed.

Ditto- all as per item 18 above but area exc. 1.5 Sq.m but not exc. 4 Sq.m each.complete all as specified and as directed.

Taking down shutters of any description not exc. 1.00 Sq.m each.complete all as specified and as directed.

Ditto- all as per item 20 above but exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each.complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410W(Gde E-250)Quality'A' with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and as directed.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructionscomplete all as specified and as directed.

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and as directed

S&F 30 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed.

S & F, steel windows double shutter (one side glazed types with glazed bars and other side gauzed types without glazed bars) withh assed steel frames abd sude hung shttters including projecting as box type hinges with steel hadles steel reg stay, complete with/without glazing bars, dovetailed as welded complete all as specified and as directed.

S & F Anodiesed aluminium frame for doors, windows ventilators with one or more rebats including jointing cleats for fixing etc complete all as specified and as directed.

S&F Anodised aluminium door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S & F anodised aluminium window shutters, sliding type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such a peg stays 150mm long (1No) hinges type D-21 100mm long (2No) suitable handle (1No) complete all as specified.

S & F brass Mortice lock 4 leavers vertical type size 100mm complete all as specified and as directed.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed. complete all as specified and as directed.

S & F 100mm long butt hinges extruted alluminium alloy with galvanised Mild steel hinge pin anodised and fixed type B21 complete all as specified and as directed.

S & F 150mm long floor door stopper of aluminium alloy body and tongue anodised with hard steel spring fixed in floor complete all as specified and as directed.

S & F Aluminium (Die cast ) body door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs. complete all as specified and as directed.

All as per item 36 Above but Supply and fixing in repairs. complete all as specified and as directed.

S & F 12 mm thick prelaminated particle board interrior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips complete all as specified and as directed.

All as per item 38 Above but supply and fixed in repairs. complete all as specified and as directed.

S & F sheet glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips of any description exc 0.5 Sqm. complete all as specified and as directed.

All as per item 40 above but supply and fixed in repairs. complete all as specified and as directed.

S&F 125mm long MS butt hinges, medium weight cold rolled. complete all as specified and as directed.

S&F 75mm long MS butt hinges, medium weight cold rolled. complete all as specified and as directed.

S & F 200mm long aluminium anodised Tower bolts of extruted section and fixed complete all as specified and as directed.

S & F 150mm long aluminium anodised Tower bolts of extruted section and fixed complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised. complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. complete all as specified and as directed.

S & F Statinless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples in repairs complete all as specified and as directed.

S&F second class hard wood 30mm thgick Glazed and ske- leton shutters, open rebated and prepared to receive glass, gauze, etc. (w/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. complete all as specified and as directed.

Ditto- All as per item 52 above but figured glass, pin head type. complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer. complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S & F in repair 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete.as in repairs complete all as specified and as directed.

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed.

S & F in anodised aluminium snap grid frame work for false ceiling including supporting wire all as specified of size of grid 605 x 605mm. complete all as specified and as directed.

S & F 4mm thick non-asbestos fibre cement building boards fixed or laid/inserted to aluminium / wooden frame work with screws including two coats of OBD over a coat of alkali resistant primer and preparation of new surfaces of ceiling. complete all as specified and as directed.

S&F in repair 75 mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2:4, type B1, complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls including demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 75 mm dia complete all as specified and as directed

S & F in repairs 20mm dia ball brass valves high pressure with polyethelene float and fly nuts complete screwed for iron pipe or brass ferrule and fixed. complete all as specified and as directed.

S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and as directed.

S&F in repair bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore/angles Stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type), complete all as specified and as directed.

S&F in repair 300 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S&Fin repair vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S & F in repairs, vitreous china bowl urinal, white,half stall type, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

S & F in repairs 10 ltrs capacity PVC valvless syphonic action type low level flushing cistern white colour with inlet, ball valve, float and handle complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, incl. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S, CP or aluminium hinging device, complete all as specified and as directed.

S & F in repairs water closet (squatting pan) complete incl provison of lime concrete bedding ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including 10 ltr capacity PVC flushing cistern and flush pipe,15mm PVC connection of size 450mm , complete all as directed and as specified by Engineer-in-charge.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

M & L for brick work with old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as directed and as specified

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description.complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement.complete all as specified and as directed.

M & L for Rendering 15mm thick in CM 1:6 on brick or concrete surfaces including finihsed the surface smooth and even without using extra cement complete all as specified and as directed.

M&L for prepartaion of new plastered surfaces of wall, and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered or un- plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for applying two coats of OBD including priming with alkali resistant primming paint and prepatation of new wall surface complete all as specified and as directed.

M & L for applying two coats of colour wash over one coat of white wash on walls including preparation of new surface complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick, PCC 1:2:4, type B0, using 12.50 mm graded aggregate as in sub base of floor complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M & L for Non skid caramic coloured tile 7 to 8 mm thick (square/ rectangular ) area of each tile exceeding .11 sqm but not exceeding .18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for Non skid caramic coloured tile 7 to 8 mm thick (square/ rectangular ) area of eachtile exceeding .11 sqm but not exceeding .18 sqm as in stristing etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick backing coat of CM 1:4 complete all as specified and directed.

M & L for for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or backing coat of CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in skirtting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick bedding in layer of CM 1:4 complete all as specified and directed.

M & L granite work of any type 20mm thick ( of any type) work table rubbed & polished in steps , jambs , pillar, widow cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of in CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified.

M&L for Chequered cement concrete tiles of size (30 cmx 30 cmx 25mm) thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment and including 20mm thick screed bed with cement mortar 1:6 complete all as specified & directed.

M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) as in edging/ kert etc complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design sand cushion 50mm thick for fixing of inter locking tiles complete all as specified and directed

M & L for Glazed ceramic coloured tiles in vertical surface 450x300mm x 7mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick backing coat in cm 1:4 on wall , complete all as directed and as specified

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed .

G SATISH REDDY AND CO

BEEGEE DESIGN SYSTEMS

NARAYANA CONSTRUCTIONS

ATUL ENTERPRISES

G.MADAN MOHAN

VACON INFRASTRUCTURES

harshraj and co

abhilasha constructions