CWE/P-12/2022-23 CERTAIN REPAIR TO ROADS AND ROAD FURNITURE AT MADHOPUR UNDER GE BASOLI

Amount

M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. including cutting around edges to at least 25 mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5 Kg per 10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30 mm, complete all as specified and directed.

M& L for Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc., applying evenly a tack coat with paving bituminous primer @ 5 Kg per 10 Sqm of road surfaces and providing bituminous premixed asphaltic semi-dense concrete 30 mm thick (consolidated thickness) with 5.5% binder content (bitumen of grade VG-30) by weight of total mix, by using self propelled mechanical paver, rolled and compacted to required smooth surface, camber and gradient, complete all as specified and directed.

M & L for preparing new/old black top road surface and like not exceeding 10 cm wide and applying one coat of retro reflective thermoplastic road marking paint 2 mm thick for longer durability with 8% glass beads using special applicator machine with heating arrangement upto 160 degree centigrade. Paint material shall be conforming to Ministry of surface transport (MOST) specification 803.4 , Vol III as laid down in specification of Road/Bridge work "Third revision", complete all as specified and directed.

S&F in repairs stainless steel location board type 'C' of size 100 cm x 76 cm, made up of stainless steel tubes framing of grade Fe 304, with top board at 9 feet above ground with letters, figures sand base of high density prismatic retro reflective tape of superior quality on both sides of the aluminium composite pannels (ACP) 3 mm thick, including necessary excavation for post holes of size 30 cm x 30 cm x 60 cm deep with PCC 1:2:4 type B-2 using 40 mm graded aggregate, complete all as specified and directed.

Supply and fixing of solar road stud having 3 LEDS of colours red/yellow to a side (total 6 nos) housed in a tough pressure die casted aluminium alloy of size (125x125 mm) or (120x130mm) of height 20 mm with nails 37 mm x 37 mm x 55 mm long with built in stem of suitable length for fixing with epoxy. LEDs, solar-cells, battery & light sensor well protected in side under tough unbreakable polycarbonate transparent sheet roof system workable for 2-3 days (nights) after full charge in 8-10 hours, complete all as specified and directed.

S&F in repair aluminium body cat eye of size 100x100x20 mm fixing with MS nails of 10 mm dia to bear the maximum load with reflectors on two sides of red or yellow colours, complete all as specified and directed.

M/S RAJESH WADHERA GOVT. CONT.

Sandeep Kumar

vivek and co

VIJAY CONSTRUCTION CO

M/S Ajay Kumar Mahajan

M/s Trade Linker Associates

KALSI CONSTRUCTION CO