REPAIR REPLACEMENT OF JOINERY PLASTERING FLOORING PLINTH PROTECTION RAIN WATER PIPE SANITARY APPLIANCE ETC AND REP MAINT OF INTERNAL WIRING OF EM INSTALATION UNDER GE AF ADM AREA AT AF STN GWALIOR

Amount

Demolition of cement concrete in any description and in any position not otherwise specifically provided for including existing roof treatment (tarfelt etc) including removing all debries to a distance exceeding 500 M but not exceeding 1.5 KM complete finishes all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof padding concrete as in leveling course to maintain the true roof slope, roof kerb or mud stops rounded or chamfered in edges etc, finish even & fair without using extra cement, complete all as specified and directed

M&L for apply elastomeric acrylic based water proofing, flexible, liquid applied, single component, weather resistant, acrylic waterproofing membrane on all types of exposed roof slabs(new and old),terraces(sloped and flat) UV rays resistant, solar reflective coating etc complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 250 litre but n. exc 500 litre for repair work and refixing the same after repair work is over complete all as specified and directed

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-2 using (20mm graded crushed stone aggregates) as in flooring and like and finished even and smooth without using extra cement including provn of joints etc complete all as specified.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete etc complete all as specified.

M & L for Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed Note: Punned/consolidated thickness shall be measured and paid

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block shall be filled with fine sand and broomed etc including dismantling existing old paver block complete all as specified and directed.

Dismantling existing sunken interlocking pavers block of any description, size and pattern and refixing the same in any location for proper matching with existing surface after carrying out the necessary repair to the under layer complete all as specified and directed (sand cushioning and sub base concrete will be measured separetely)

Taking down cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc.complete all as specified.

M&L for Rendering 15mm thick on brick work or concrete surface on wall in cement mortar 1:4 finished even and smooth without using extra cement all as specified.

M&L for Rendering 15mm thick on brick work or concrete surface on wall in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for preparing newly plastered or unplastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc,complete all as specified and directed

~Ditto~ all as per srl item no 17 but Except brick built in CM (1:4) complete all as specified and directed

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of area not exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each, complete all as specified and all as directed.

S&F factory made plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS: 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F side hung double shutter leaf of rolled Z steel scetion as per IS 1038 including MS suitable peg stay ,box type hinge 02 in each shutter, MS tower bolt with plate100 mm 02 in each shutter,MS handle 01 in each shutter welded to frame and 12 mm square guard bars welded to frame 150mm C/C. The shutters are to be secured with hinges welded to mild steel pressed steel frame complete all as specified and directed

S& F pressed steel frames 105 x 60mm made of 1.25 thick CRCA sheet for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate etc, complete as specified and directed.

M & L for providing cement concrete type C1 1:3:6 (20mm graded stone aggregate as in filling of pressed steel door frames/fixing of hold fast etc complete all as specified and direcetd.

S&F in repair 19mm thick pre-laminated particle board interior grade, pre-laminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber/ steel frame work including provn of IInd class hard wood beading duly painted on exposed edges complete all as specified and as directed.

S&F anodised aluminium handles cast type of size 150 mm complete all as specified and directed.

S&F powder coated aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of size 250 mm complete all as specified and directed.

S&F Aluminim anodised barrel tower bolt 150 mm long extruded section complete all as specified and directed.

M&L for two coats synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Dismantling of asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled section for structural steel work as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding crane, fixed with angle cleats or other connecting plates/ bolts, conforming to Fe-410W complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

S&F pre-painted, semi corrugated Galvalume steel sheet, 0.5mm thickness, aluminium zinc coating of 120 gms, tensile strenth of 550MPa, top organic coating of polyster paint 16-18 microns over 5-7 mocrons epoxy primer fixed on angle iron bracket with & including self drilling and self tapping screws of appropriate size, sealed with integrated EPDM rebber washer for water tight fixing and side laps to be stiched using Alluminium pop rivets fixed on top of roof complete all as specified and directed.

S&F in repairs 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane, incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.

M&L for colored designed/digital glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in CM 1:4 on wall complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7- 8 mm thick, designed/ digital of approved colour (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6 )complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified and directed.

Supply and fix in repairs of PVC flushing cistern 10 ltr capacity, valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accesseries to wall complete all as specified and directed.

S & F in repair Vitreous china wash basin , white , flat back, size 550 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, 32mm CP waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repair 5mm thick beveled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 5mm thick PVC sheet or 4mm thick AC bldg board, and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F, rotational mounded polythene water storage tank of capacity 500 liters (Cylindrical /vertical with close top) triple layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and directed.

S&F ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

All as per item No 44 above but 20 mm bore complete all as specified and as directed.

M&L for re-fixing of old steel GI tubing with all fittings, 15 mm bore and connections in new or old position (walls, ceiling, floors etc) complete all as specified and as directed.

All as per item No 46 above but 20 mm bore complete all as specified and as directed.

S&F GI tubing15 mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

All as per item No 48 above but 20 mm bore complete all as specified and as directed.

S&F in repair 15 mm dia bore cast copper alloy chromium plated fancy type angle stop cock screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair15 mm dia bore bib taps cast copper alloy with fancy type, chromium plated capstan head screwed down, screwed for iron pipe, or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

M&L for greasing and oiling of rolling shutters (manually operated) including replacement of small parts such as lock, damaged strip, if any, straightening of guide channel and other small articles to making it functional complete all as specified and directed.

M&L for greasing and oiling of rolling shutters (Gear box operated) including replacement of small parts such as lock, damaged strip, if any, straightening of guide channel and other small articles to making it functional complete all as specified and directed.

Dismantling of old steel gate of any size for necessary repair of damaged gate pillars and refixing the same after repair of gate complete all as specified and directed. Note: Repair of gate shall be measured and paid separately under respective item of BOQ.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

All as per sl item No. 57 but embedded on natural ground.

Dismantling chain link fencing of any type and size and fixed in any type of post complete all as directed.

S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 12cm long and dia of bolt etc, complete all as specified.

S&F, in repair galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2mm dia bards at 75mm spacings and straining and fixing to any type of standerd rails straining bolts, including, seuring or tying at crossings with and provision of galvanised mild steel wire, staples etc. complete all as specified. (Note :- Each line to be measured)

Supply only galvanised chain link fencing of size 100 x 100mm aperture and dia of wire of any size or type as approved by Engr-in -charge etc, complete all as specified. (Note :- (i) Fixing charges will be measured and paid separately under relevant item hereinafter. (ii) Weight of frame will be ascertained by the BOO before incorporation in work.)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified.

M&L for plain cement concrate1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundaion filling etc, complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified.

Disconnecting existing water storage tank, setting aside (or lowering if required) for repair including cleaning of tank with making it disinfected and hoisting, reconnecting/refixing the same of capacity exc 250 litres but not exc 500 litres of tank complete all as specified and as directed.

Disconnecting existing water storage tank, setting aside (or lowering if required) for repair including cleaning of tank with making it disinfected and hoisting, reconnecting/refixing the same of capacity exc 500 litres but not exc 1000 litres of tank complete all as specified and as directed.

S&F in repair gunmetal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for 15mm bore complete all as specified and directed.

Taking down carefully existing unserviceable copper/ aluminium point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators light fittings etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light /fan/Exhaust fan point controlled by one switch with using FRSLH1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits /Casing caping (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per srl item No. 72 above but, point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.complete all as specified and directed..

All as per srl item No. 72 above but point wiring for one 5 pin socket outlet, on same board .

All as per srl item No. 72 above but One 3 pin socket 15 Amp independent with PVC insulated and unshethed copper stranded conductor of size 2.5 Sqmm including 1.5 Sqmm PVC insulated and unsheathed copper conductor for continuous eathing complete all as specified and directed.

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as approved

M&L for socket outlet 2 in 1, 5 pin, 6 Amps flush type white ivory finish complete all as specified and as approved

S&F switch socket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and as approved

M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified.

M&L for lamp holder insulated body with back plate for batten fitting complete all as specified.

M&L for switch/socket combination 2 in 1, 3 pin 5 & 16 Amps flush type universal complete all as specified and directed.

Supply and Fixing step type electronic fan regulator single phase ,230 volt, 100/120 watt complete all as specified and as approved

Supply & Fix for decorative slim linear LED tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified & directed.

Supply and fixing Street/Security light fittings 1X35W new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washers all directed.

Dismaintling & Taking out MCB DBs VTPN with all MCB's/Isolator & metal clade box any size , any type and capacity

Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed.

Dismaintling & Taking out MCB's/Isolator/MCCB any size , any type and capacity

S&F MCB single pole 6 to 32 Amps, 10 KA ,240 Volts complete all as specified.

S&F MCB Single pole and neutral 63 Amps, 240 Volts complete all as specified.

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed.

MOHAN SINGH BHADORIA

KISHAN CONSTRUCTION COMPANY

M/s Shubham Construction Co.

JNK BOND

M/s Subhash Construction Co.

M/S Amit Traders

GWALIOR TRADE LINK