SPECIAL REPAIR TO BLDG. NO P-141 (OR MD ACCN) AT NEW SOLANKI LINE OF 267 ENGR REGT AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified and directed

Material and labour for rendering 10mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 10mm thick cement mortar (1:4) on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Material and labour for 5mm thick cement plaster on ceiling in cement mortar 1:3 including finishing the surface even & smooth complete all as specified and directed.

Material and labour for repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and directed

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified and directed

Material and labour for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applying two coat of oil emulsion paint over 1mm thick Birla wall care putty complete all as specified and directed.

Material and labour for preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old plastered surface of wall and applying one coats of white washing complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old plastered surface of ceiling and applying one coats of white washing complete all as specified and directed.

Material and labour for preparation of newly plastered or un-plastered surface of walls including cornices, pilasters etc. and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base etc.; concrete surfaces finished fair and even and prepared to receive floor finish complete all as specified and directed.

Material and labour for 20mm thick PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in DPC using WPC @ 3% by wt of cement complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour for 18 to 20mm thick machine cut Kota stone in flooring laid over and including 15mm thick screed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.

Material and labour for 18 to 20mm thick machine cut Kota stone as in vertical surfaces, risers of steps, skirting, dado and pillars etc laid over and including 10mm thick rendering in cement mortar (1:4) jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.

Material and labour for 16 to 18mm thick pre polished green marble as in cooking platform laid over 15mm thick screed in cement mortar (1:6) including making of hole for LPG pipe and chamfering the corners complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 300 x 450 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 400 x 400x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 metre mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Srl Item No. 30.00 here-in-before but except brick

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) complete all as specified and directed.

Material and labour for PCC (1:7:12) type F-2 using 40mm graded brick aggregate as in filling in sunken floor, foundation, mass concrete etc. complete all as specified and directed

Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Material and labour for polymeric membrane, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 Kg/ sqm complete all as specified and directed complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in slab, chajjas, parapet, facia etc. complete all as specified and directed.

Material and labour for precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate and set in cement mortar (1:4) as in landing, manholes cover slabs, chajjas, shelves and similar articles with plain fair faces, including champers, weatherings, throating etc complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to soffit and sides of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat & fair finished surfaces of concrete complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed

Material and labour for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coping etc including necessary form work, weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Material and labour for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc complete all as specified and directed

Material and labour for brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, foundations, filling and mass concrete, roof padding etc. complete all as specified and directed

Material and labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in coping etc includng necessary formwork, weathering slightly rounded or chamfered angles and throating complete all as specified and directed

Material and labour for bitumen primer for use in waterproofing and damp-proofing treatments @ 0.3 ltr/ Sqm complete all as specified and directed

Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over the roof surface including cleaning surfaces complete all as specified and directed

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed complete all as specified and directed.

Material and labour for brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement including flush pointing in cement mortar (1:3) as separate operation complete all as specified and directed.

All as per Srl Item No. 58.00 here-in-before but except tiles

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.

Supply and fixing pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed

Supply and fixing pressed steel door frame of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed

Material and labour for cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in filling in steel frame/ roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed

Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Material and labour for mild steel, plain black sheet 1.6mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles etc as required complete all as specified and directed

Supply and fixing factory made 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 40 x 6mm thick 2nd class hard wood lipping on edge complete all as specified and directed.

Material and labour for 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Material and labour for 35mm thick factory made plain framed, paneled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for 18/19 mm thick MDF board, exterior grade, prelaminated both side with decorative choice lamination and fixed with screws to timber frame work including 18/19mm wide, 6mm thick 2nd class hardwood lipping on edges complete all as specified and directed.

Supply and fixing Continuous (Piano) hinges, mild steel, bright finish or electro galvanised 30mm width complete all as specified and directed

Supply and fixing 100mm size hasp and staple, mild steel, wire type, stove enameled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing 2nd class hard wood plain fillets. Square or rectangular or triangular in section clean sawn, sectional area exc 13 Sqcm and not exc 25 Sqcm secured with nails or brads, complete all as specified and directed.

Supply and fixing 75mm brass handles, cast type, polished bright, fixed with brass screw, complete all as specified and directed

Supply and fixing in repair steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters including box type/ projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolts and handles etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), complete as per Drg No. CEJZ/TD-1020/08 sheet 1/3 to 3/3. Note : The above rate for glazed and gauged shutter window/ ventilator and measured one time clear opening for payment of window/ ventilator

Supply and fixing steel ventilators with top hung shutters including hinges, steel peg stay etc complete all as specified and directed

Material and labour for anodised aluminium window/ ventilator shutter side hung having 75mm x 44mm x 2.85mm thick stile bottom rail an top rail including necessary fitting joinery cleat glaring packing snap beading 10mm x 10mm, 2 Nos of anodised aluminium handle 150mm size, 2 No chromium plated bott hinges 75mm size and 2 No 100mm long aluminium tower bolt etc including frame of section 100mm x 44mm x 3mm and including 5mm thick float glass and fixing complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stamples complete all as specified and directed

Material and labour for 4.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc. 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing in repair factory made built-in steel cup board with pressed steel frame of size 75mm x 50mm x 1.25mm thick with pressed steel shutter 1.25mm thick fixed to masonry wall by hold fasts, made out of 25 x 3mm flat iron including MS hanging rod of 10mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provn of MS peg set 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No. CEJZ/Td/20/11 sheet 1/5 to 5/5 dated 01 Aug 2011, complete all as specified and directed

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.

Supply and fixing Prayag Syment tower bolt 200mm long all as specified and directed.

Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.

Material and labour for mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed in repair complete all as specified and directed.

Supply and fixing in repair aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long all as specified and directed.

Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.

Supply and fixing in repair extruded aluminium alloy handles, fabricated type, anodised, 150mm size, all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified and directed.

Supply and fixing in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed in cup boards complete all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down old GI tubing 15mm bore and connections including fittings complete all as specified and directed.

Taking down old GI tubing 20mm bore and connections including fittings complete all as specified and directed.

Supply and fixing 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Supply and fixing 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour for refixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Material and labour for refixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Supply and fixing in repair 15mm bore body bib cock (Foam Flow) with flange, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and fixing in repair bib taps, cast copper alloy, with crutch or butterfly handles, screwed down, screwed for 15mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. Make: Jaquar model No. FLR-5047N or equivalent from group 1 in Appendix ‘B’ to Particular Specification.

Supply and fixing stop valves 15 mm nominal bore, cast copper fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, fixed in repairs complete all as specified and directed.

Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.

Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed. Make: Jaquar model No. FON-40053 or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.

Supply and fixing in repair single lever sink mixer swinging spout (wall mounted) with connecting legs & wall flanges (as approved) suitable for fixing to 15mm bore GI pipe, complete all as specified and directed

Supply and fixing in repair wall mixer with hand shower arrangement with connecting legs, wall flanges & wall bracket with hand shower complete all as specified and directed. Make: Jaquar model No. CON-267KN or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.

Supply and fixing in repair centre hole basin mixer with popup waste with 450mm long braided hoses (as approved) suitable for fixing to 15mm bore GI pipe, complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 60cm long complete all as specified and directed. Make: Jaquar model No. ACN-1171N or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.

Supply and fixing Acrylic corner shelf (with chromium plated bracket) 3 in set of shelf 8mm thick with and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified and directed. Make: Jaquar Cat No. CAN 1173 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repair complete all as specified and directed

Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) fixed including provision of lime concrete bedding etc complete all as specified and directed.

Supply and fixing vitreous china wash hand basin of size 550 x 400mm (Flat back or angle back type) with full pedestal including 32mm bore brass chromium plated waste fitting, a pair of cast iron bracket duly painted/ erecting stand including cutting and pinning in ends making good disturbed surfaces in cement mortar 1:3 including dismantling the existing unserviceable wash basin complete all as specified and directed.

Supply and fixing in repair PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.

Supply and fixing in repair flexible PVC waste pipe of approved quality 25mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed

Supply and fixing in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

Supply and fixing in repair mild steel CP grating 125mm dia with centre hole all as specified and directed.

Supply and fixing in repair acrylic soap dish 6mm thick of size 125mm fixed to plugs with CP brass screws complete all as specified and directed

Supply and fixing soap dish stainless steel chromium plated fixed in repair with brass screws and rawl plug complete all as specified and directed. Make : Jaquar model No. AKP-35731P.or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing in repairs of peg set of 5 of PTMT fixed to rear side of door shutter in bath complete all as specified and directed.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks, 500 liter capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified and directed in SSR Part I, fixed complete all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed in repairs complete all as specified and directed.

Supply and fixing brass chromium plated towel ring 15cm dia complete fixed in repair complete all as specified and directed. Make: Jaquar model No. AQN-7721 or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.

Supply and fixing in repair chromium plated health faucet for EWC with 1 m long CP tube, with CP wall hook, superior quality complete all as specified and directed. Make: Jaguar or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.

Supply and fixing Toilet paper holder of chromium plated fixed to walls chromium plated brass screws complete all as specified and directed. Make: Jaquar model No. AKP-35751P or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.

Supply and fixing in repair stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785mm x 255mm and weight not less than 8.00 Kg each of approved quality, complete all as specified and directed

Supply and fixing in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.

Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing PVC (SWR) floor trap with mild steel CP grating including jointing to waste pipe with solvent cement 75 mm dia of outlet fixed in repairs all as specified and directed.

Supply and fixing cast iron floor trap with grating including jointing to waste pipe in run lead joint fixed in cement concrete type (1:2:4) type B-1 diameter of outlet 75mm, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipe jointed with cement mortar and taking out of trenches if required 75/110mm complete all as specified and directed.

Supply and fixing 100mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to walls etc. complete all as specified and directed.

Supply and fixing 75mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to walls etc. complete all as specified and directed.

Supply and fixing cast iron cowls 75mm size, complete all as specified and directed.

Supply and fixing cast iron branch pipes, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore pipe fitted with oval access doors complete all as specified and directed.

Supply and fixing cast iron branch pipes, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75mm bore pipe fitted with oval access doors complete all as specified and directed.

Supply and fixing bends (any radius), diminishing pieces or tapers (larger bore measured) for 100mm bore pipe complete all as specified and directed.

Supply and fixing bends (any radius), diminishing pieces or tapers (larger bore measured) for 75mm bore pipe complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection/ path complete all as specified and directed.

All as per Srl item No. 146.00 here-in-before but and even without using extra cement n.exc 2m in length & joints filled with bitumens mastic (1:1)

Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection/ path complete all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete coloured inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 40mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note : The sample shall be got approved from the GE before buld procurement and lots shall be got tested independently by the GE

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed.

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. 150Sqcm but n. exc. 400Sqcm complete all as specified and directed.

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but n. exc. one brick complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10cm girth in brick walls complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted surfaces and applying one coat lack japan paint of eaves gutter and pipes any description, n.exc 60cm girth including holder bats, distance pieces, etc. (length measured over bends, branches etc.), complete all as specified and directed

Material and labour for preparation of old painted surfaces and applying one coat lack japan paint of eaves gutter and pipes any description, n.exc 10cm girth including holder bats, distance pieces, etc. (length measured over bends, branches etc.), complete all as specified and directed

Excavation in trenches in soft/ loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25 cm thick each layer complete all as specified and directed.

Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soils) to a distance exc 250m but n. exc. 500m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Supply and fixing mild steel work as in framed of doors, gates, fencing posts and struts in fencing of angle or other section like MS tubular hollow section with gusset plates, rails, braces etc drilled for fixing steel sheeting etc including necessary cutting, drilling, welding etc and bending to swan neck shape as required and drilling holes notching for wire etc. and in gates prepared for handing, sliding with and including either hooks and hinges, hanging etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Dismantling fencing wire mesh any type including wooling rod and FI complete all as specified and directed

Material and labour for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. fixed in repair complete all as specified and directed

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.

Material and labour for vitrified ceramic tiles 8 to 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for vitrified ceramic tiles 8 to 10mm thick, any shade as approved, polished area of each tiles n.exc. 0.36 Sqm (square/ rectangular) in vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc. 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm and removing surplus soil to a distance n. exc. 50m and making good the surfaces complete all as specified and directed.

Material and labour for M.S work in angle iron/flats/pipe/plates in posts, rafter, purlins etc connected to common rafters of any size confirming to Fe-410-w(grade-e-250) quality A including necessary drilling holes, cutting tops to shape welding etc and fixed with nuts & bolts etc complete all as specified and directed

Supply and fixing Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fixing Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fixing mild steel screw bolts diameter of neck 11 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 50mm but n.exc 100mm long and dia of shank 10 to 16mm complete all as specified and directed

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Material and labour for solid PVC wall/ ceiling consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame on wall and ceiling as per specifications and drawing approved by Engineer-in-Charge.

Material and labour for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing to wall/ ceiling to make PVC frame as per specifications and drawing

Supply and fixing coloured vitreous china wash down wall mounted type water closet with rimless wall hung-WC with UF seat cover, hinges, accessories set, size 370 x 545 x 370mm fitting with syphonic action type flushing cistern in single piece pattern with inlet ball valve float and handle, including fixing bolt, with bottom and cover and mild steel chromium plated hinging device with CP Jet Spray with 2 x 1m CP flexible tube fixed in repair complete all as specified and directed Make : Jaguar DRS-WST-37951 or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications

Supply and fixing vitreous china sensor control type urinal, half stall, white with integrated EFS 360 x 330 x 740mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including PVC flush pipe, grating, waste coupling and union for discharge pipe, waste pipe, spreader etc all as specified and directed. Make: Cera model No. 5005A or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.

Supply and fixing in repair pillar taps fancy type, controlled by sensor high quality cast copper, chromium plated screwed one end with long screwed shank screwed for 15mm bore pipe complete all as specified and directed. Make : Cat No SNR-CHR-5121 or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications

Material and labour for PVC bathroom cabinet of size 535mm x 483mm x 110mm with mirror fixed in repairs complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Supply and fixing PVC (SWR) junction single (Single T) 110mm bore equal or unequal with access door complete all as specified and directed.

Taking down carefully existing point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawl plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed

Material and labour for point wiring for one light point controlled by one switch with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing surface/ concealed conduit and accessories and terminated in and including new sunk type pressed steel terminal switch boxes 1.6mm thick with plastic laminated bakelite sheet top cover 3mm thick make hylum fixed with nickel polished brass screws with washers and including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed.

All as per srl item No. 190.00 above but for one fan point controlled by one switch through regulator.

All as per srl item No. 190.00 above but for 3 pin 5 Amp socket point controlled by one switch on independent board.

All as per srl item No. 190.00 above but for one socket point controlled by one the same board 3 pin 5 Amp with other switch

All as per srl item No. 190.00 above but for one bell point controlled by one bell push.

All as per srl item No. 190.00 above but one light point controlled by two way switches.

All as per srl item No. 190.00 but 3 pin 15 Amp socket outlet with 2.5 sqmm PVC insulated FRLS copper cable and 2.5 sqmm PVC insulated FRLS copper cable for continuous earth continuity conductor all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 230 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 230 Volt AC single pole, two way complete all as specified and directed.

Supply and fixing switch piano flush type, 15 Amps, 230 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing socket out let 5 Amp, 5 pin flush type complete all as specified and directed.

Supply and fixing socket outlet multipurpose 3 in 1, 6 pin, 15 Amps, flush type complete all as specified and directed

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified and directed.

Supply and fixing batton holder ISI marked insulated body complete all as specified and directed.

Supply and fixing bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and directed.

Supply and fixing call bell, ding dong AC single phase, 230 volts including wooden/ PVC board of suitable size, connecting & testing complete all as specified and directed.

Material and labour for sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire through rigid PVC conduit shall be measured as one RM.

Material and labour for sub main wiring with PVC insulated cable copper conductor FRLS two single core 2.5 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 2.5 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 2.5 sqmm wire and one run of 2.5 sqmm wire as earth wire through rigid PVC conduit shall be measured as one RM.

Material and labour for sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside with neutral and earth connection bar prewired complete all as specified and directed.

Material and labour for sheet metal enclosure for DBs when MCBs to be used, SPN 4 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside with neutral and earth connection bar prewired complete all as specified and directed.

Material and labour for MCB SP 6 TO 32 Amps, 10 KA, B-curve complete all as specified and directed.

Material and labour for MCB SPN 6 to 32 Amps, 10 KA, B-curve complete all as specified and directed.

Supply and fixing energy saving recess mounting LED round downlighter deep drawn LED luminaire 12 watt 6000 K suitable for flase ceiling, having power factor more than 0.90 IP-20 class-I protection with high efficiency LED electronic driver, surge protection upto 2 KV (minimum), operative on 140 volts to 270 volts AC supply, including cutting required shape in false ceiling and making good the distrubed surface after installation of light fittings complete prewired products must be made in India only connection and testing complete all as specified and directed. Note: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

Material and labour for energy saving & environmental friendly long life versalite pressure di-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 25 watt LED for bldg security lights with high efficiently electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty including bracket made out of GI pipe 32mm dia bent to shape and clamps 40 x 6mm with nuts and bolts prewired products must be made in India only connection and testing complete all as specified and directed. Note: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

Supplying, laying, jointing and testing and commissioning of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

Material & labour for sand cushioning with 8cm thick layer before laying of cable and 15cm thick layer after laying of cable in trenches complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed.

Supply and fixing GI pipe light grade of size 40mm dia bore for protection of cable under road, along the pole or under floor including fittings complete all as specified and directed

Supply and fixing in repair energy saving LED luminaries comprising of extruded aluminium housing high quality PC diffuser, reliable and robust housing structure, slim integrated design easy to install, 125 Lumens/ Watt 4 feet, 18 to 20 watt 124 volts AC supply to be fixed on PVC square boxes (02 Nos) complete prewired including connection & testing all as specified and directed

Taking down ceiling fan of any sweep or make, filling cavities with filler one coat after cleaning, painting the complete fan (as per previous colour) using synthetic enamel paint by spraying including replacement of flexible wire, rubber reel, nut, bolts etc. and re-fixing in original position complete all as specified and directed.

Supply and fixing five step fan regulator, electronic type, single phase, including connection complete after dismantling/ removing unserviceable regulator all as specified and directed.

Material and labour for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part-I (2009) and connected to panel board, all as specified and directed and testing on completion including provision of earth wire 4mm dia duly protected with and including 15mm dia bore medium grade GI pipe upto 7.5m from electrode to earth point including provision of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC (1:3:6) type C-1 as in earth chamber, 50mm thick RCC cover using cement concrete (1:2:4) type B-1 reinforced with & including 8mm dia mild steel TMT bar @ 100mm c/c both ways with suitable handle for lifting & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified and directed. Note: On testing, after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department.

Supply and fixing LED retrofit lamp 10W, 6500K, 220-240V, B-22 base cap complete all as specified and directed.

Supply and fixing exhaust fan metallic body, 300mm sweep, 900 RPM, single phase, 230 Volt, heavy duty with louvered shutter including provision of three core copper conductor cable of required length of size 23/ 0.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nuts, bolts & washers complete all as specified and directed

Material and labour for making opening for exhaust fan of size 300mm dia by cutting of wall of any specification including finishing surface and rendering complete in cement mortar 1:4 10mm thick including making good to all disturbed surfaces and matching the same with existing specification complete all as specified and directed

Supply and fixing energy saving mirror light LED luminaire, 03 watt, 6000K extruded aluminium heat sink provided for efficient heat dissipation having power factor more than 0.90 IP-20 class-I protection with efficiency LED electronic driver, surge protection 2KV (minimum), operative on 140 volts 270 volts AC supply complete prewired, connecting and testing all as specified and directed. Notes: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed

Material and labour for 75mm thick hardcore of broken stone or boulder of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed (mechnically) to a true surface complete all as specified

Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L reinforced cement concrete (1:1½:3) type A-1 mix using 20mm graded stone aggregate as in slabs supported on wall, beams and columns in floor, roof, landing, balconies, canopias, deck slabs and in shelve and the like complete all as specified and directed.

M&L reinforced cement concrete (1:1½:3) type A-1 mix using 20mm graded stone aggregate as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S&F false ceiling with Everest fiber cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size 595 x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking meta grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and 15 x 32mm made from 0.3mm thick sheet and cross ‘T’ of size 15 x 32mm made of 0.30mm sheet, spaced between main ‘T’ at 600mm c/c to form a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/ making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main ‘T’ bottom exposed width of 15mm of all T-sections shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/ Sqm complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified.

Add or deduct for each 25mm girth or part thereof over or under 30cm on Srl Item No. 232.00 here-in-before complete all as specified and directed

Material and labour for reinforced concrete pipes 300mm bore, class NP2, laid and jointed complete with collars and in cement mortar (1:1) and testing complete all as specified and directed.

Material and labour for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 300mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M/S Kuldip Construction Co.

NATIONAL BUILDERS

JAGDISH KUMAR SEHGAL