PROVN OF CERTAIN REVENUE, MINOR WORKS AND SPECIAL REPAIR UNDER AGE B/R-I OF GE NORTH MAMUN.

Amount

Excavation in trenches n. exc 1.50 m wide and n.exc 1.50m in depth for foundation and getting out in any type of soil, complete all as specified and directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.

M&L sand filling in floors or paving incl leveling watering and consolidation complete all as specified.

M&L Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I laid before and after laying of cable, complete all as specified.

M&L for PCC 1:5:10 type E2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete (sunken floors etc.) all as spd.

Precast cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) set in cement mortar 1:4 as in cover slab, etc complete all as specified and directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.

M&L Cement concrete type B-1 (1:2:4) (20 mm graded crushed stone aggregate) as in coping, bed plates and the like including weathering, slightly roundered or chamfered angles and throating, as directed including necessary form work and finishing complete all as specified.

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels & drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc complete all as specified and directed.

M&L concrete bed to drain pipes including packing under haunching against the size forming cradles in cement concrete 1:3:6 type C2 for 200 mm dia pipe complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded aggr) as in surface channels, drains, manholes, coping, etc complete all as specified and directed

M&L Reinforced cement concrete M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and directed.

M&L Brick work with fly ash bricks old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed.

Brick work with old servicable bricks retrieved from dismantling straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:4 complete all as speecified and directed

M&L Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) and as directed.

M&L Brickwork with fly ash bricks, old size straight or curved on plan to any radius in half brick thick walls built in CM (1:4) and as directed.

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc. 10cm girth in brick/stone walls, complete all as specified.

M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed.

M&L 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I 2009 (Larger size to be provided) complete all as specified and directed.

Soild PVC door frame wood grain color coated of size 50mm x 95mm made out of 5mm wood grain colour PVC sheet reinforced with MS Sqaure tube , supply and fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 2nd class Small fitting such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours; articles not exceeding 200cu.cm each complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

S & F TMT bars 8 mm dia and below cut to length bent to shape required, incl cranking , bending spirally for hoping for columns , hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L Mild steel TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-O or Fe-410-O all as specified & directed.

S&F mild steel as in vertical posts, roof trusses (framed), trussed, purlins, fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces complete all as specified and as directed.

M& L steel iron base plate plugs, bolts, and screws of Fe 410-W (Gde-E-250 Quality -A) complete all as specified and directed.

M&L Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples all as specified & directed.

GI wire netting of galvanized steel wire 0.90mm dia and size of mesh 12mm fixed to wood or metal studding, joints,etc., in walls,ceilings,stanchions,beams including all laps,cutting and waste complete all as specified and directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

Mild steel 300mm, ordinary rat tail rod pattern door spring including roller and roller plate of mild steel, complete all as specified.

S & F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats (min wt 190gm) .

S&F 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.

M&L Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded crushed stone aggregate) back of chowkhats and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

MS Frame work for cooler stand of Fe 410-W(gde E-250) all as specified.

GI wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc. including all laps, cutting & waste

False ceiling of not less than 6mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling of existing sheets complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.

M&L 60 mm thick M-35 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and no pigment, all as specified and as directed.

M&L 75mm cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in plinth protection, paving, etc complete all as specified and directed.

M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement (liquid water proofing compound shall be measured and paid separately ) complete all as specified and as directed .

M&L APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only liquid water proofing compound.

M&L Cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and as directed.

M&L 25 mm thick PCC ,type B-0(using 12.5mm graded crushed stone aggregate) as in flooring cmplete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n exc .11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over 15mm thick screed bed in CM (1:4) all as spd and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:4) all as spd and directed.

M&L glazed ceramic coloured tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as spd & directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as spd & directed.

M&L for Industrial grade matt finish type-V, thickness 10 mm floor tile of size area exc 0.18 Sqm but not exc 0.36 Sqm each as in skirting, steps and like that, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 10 mm thick backing coat in 1:3 (surface finished even and rough to receive tile) including dismantling existing surface complete all as specified and directed.

M&L for Industrial grade matt finish type-V, thickness 10 mm floor tile of size area exc 0.18 Sqm but not exc 0.36 Sqm, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed in CM 1:4 ( surface finished even and rough to receive tile ) including dismantling existing surface complete all as specified and directed.

M&L for 10mm thick plaster in cement mortar 1:3 in fascia / edging / ceiling of Chajjas, roof projections, manholes, drinage, etc finished even and smooth without using extra cement mixed with water proofing compound. (Note: WPC shall be measured and paid seperately) .

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shallbe measured and paid separately) all as specified and directed.

M&L Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement with water proofing compound all as specified and directed. (WPC shall be measured and paid separately).

Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified.

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, and applying two coat of cement base paint including curing complete all as specified & directed.

M&L two coats of distemper oil emulsion over a coat of primer after application average 2mm thick wall putty including preparation of new surfaces complete all as specified and directed.

M&L two coats of distemper oil emulsion over a coat of primer after application average 2mm thick wall putty including preparation of old surfaces complete all as specified and directed.

M&L two coats of white wash on surface of wall including preparation of old plastered surface complete all as spd and directed.

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as spd and directed.

Preparing new /Old wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic , antifungal emulsion exterior weather proof paint on external surfaces, complete all as specified.

Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat of cement base paint over a coat of alkali-resistant priming paint all as specified & directed.

M&L Preparation of old or untreated steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed .

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified .

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

Globe or gate valve ,20mm bore, , cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specifed.

Angular Stop valve cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

Stop valves, cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specifed.

S&F Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as spd and directed. Make - Jaquar , Marc and Johnson

S&F 15mm bore chromium plated pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & directed. Make - Jaquar , Marc and Johnson

S& F CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as spd and directed. Make - Jaquar , Marc and Johnson

S&F towel rail CP 600 mm long complete all as specified and directed.Make - Jaquar , Marc and Johnson

S & F Vitreous china wash basin(Oval Shape), white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe including waste copling 32mm size full thread , all as spd and directed.

S&F Vitreous China squatting pan of orissa pattern, size 580x440mm white with supply and fixing of CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

S&F Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, complete all as specified.

PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, fixed in repair, complete all as specified.

S&F Viterous china urinals, half stall type, incl CP coupling, waste pipe and all necessary fittings, complete incl providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60mm long brass screws, including bottle trap and connected fitting and pointing around urinal back in cement all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. Make:Paryag/Polytech

S& F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass sheof 12cm wide with chromium plated brackets guard & railing 60cm long

M&L Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.

Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 50 mm bore sand cast iron soil waste and vent pipes along with reducer 100/50 or 75/50 ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed .

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed .

Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 75mm, complete all as specified.

S&F in repair 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed .

S&F Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete ,fixed in repair ISI Marked all as specified & directed.

Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, bore of pipe 75mm, fixed in repair, ISI marked complete all as specified.

S&F CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified.

S&F cast iron cowl for 50 mm dia all as directed .

S&F cast iron Swan necks (or offsets) upto 152mm projection for 100 mm to 75 mm pipe complete all as specified and as directed .

M&L 200 reinforced cement concrete pipes class NP2 with one collar per length of pipe complete all as specified and as directed.

Cutting into existing manholes for connecting new drains for ineternal dia of pipe 100mm dia and above, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

Construction of septic tank for 150 users (Brick construction with sub class 'B' bricks using old size bricks), earth work in any type of soil,Foundation in PCC1:2:4, Brick work in CM 1:4, RCC slab covers Incl RCC Precast manhole cover having 6 mm Plate embeded all around/ fibre reinforced cover with Angle Iron frame vent Shaft and Sludge chamber etc complete all as specified and shown on drawings No CEPZ/TD-013/13 Sheet 1/5 to 5/5 Dated 11.09.13.

Construction of septic tank for 10 users (Brick construction with sub class 'B' bricks using old size bricks), earth work in any type of soil,Foundation in PCC1:2:4, Brick work in CM 1:4, RCC slab covers Incl RCC Precast manhole cover having 6 mm Plate embeded all around/ fibre reinforced cover with Angle Iron frame vent Shaft and Sludge chamber etc complete all as specified and shown on drawings No CEPZ/TD-013/13 Sheet 1/5 to 5/5 Dated 11.09.13.

M&L Construction of Soakage well 3.0 m dia and 4.5 m deep below (Brick construction with sub class 'B' bricks using old size bricks) inlet pipe level (depth from ground level to below the inlet pipe 45 cm) , earth work in any type of soil , foundation in PCC 1:3:6 , wells of Honey combed and Solid in M-25 Concrete, Incl Intercepting Chamber , screen Chamber Brick work in cement mortar , RCC cover slab in M-25/ filling with brick bats, complete all as specified and shown on drawings No CEPZ/TD-013/13 Sheet 1/5 to 5/5 Dated 11.09.13.

M&L Construction of Soakage well 1.8 m dia and 3.0 m deep below (Brick construction with sub class 'B' bricks using old size bricks) inlet pipe level (depth from ground level to below the inlet pipe 45 cm) , earth work in any type of soil , foundation in PCC 1:3:6 , wells of Honey combed and Solid in M-25 Concrete, Incl Intercepting Chamber , screen Chamber Brick work in cement mortar , RCC cover slab in M-25/ filling with brick bats, complete all as specified and shown on drawings No CEPZ/TD-013/13 Sheet 1/5 to 5/5 Dated 11.09.13.

Taking down chowkhats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down chowkhats of frames exceeding 1.50 sqm but not exceeding 4.0 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Dismantling of existing framed trusses of span n.exc 10mtr and refixig of trusses on base plate anchore with holding down screw measured and paid separately including two coats of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed.

Dismantling of rolled mild steel as in tubular purlins, rafters etc and refixing of purlins, rafters on trusses including necessary cleats etc. including two coats of synthetic enamel paint after preparation of old steel surface complete all as specified and as directed.

Dismantling of existing precast cement concrete block masanory of any description complete all as specified and directed.

Dismantling old floor tile incl cement mortar bedding and removal of debris out of premises complete all as specified and directed.

Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down carefully unsv aluminium point wiring light/fan/socket or power complete and including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface matching with existing specification complete.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit /existing conduit of appropriate size but not less than 20mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, with inner, outer frame plates including metal flush shunken boxes with zinc oxide plated suitable size for mounting switches, sockets, fan regulators etc connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by one switch.

All as per Srl item No 134 above but one 5 pin socket outlet 5 Amps on independent board with separate switch 6 Amp one way.

All as per Srl item No 134 above but one 5 pin socket outlet 5 Amps on same board with separate switch 6 Amp one way.

All as per item No 134 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Switch piano flush button 5 Amp single pole, one way, complete all as specified.

Socket outlet, 3 pin, 5 Amp, flush type, complete all as specified.

Socket outlet, 2 in 1, 3 pin, 5 & 15 Amp, flush type universal, complete all as specified.

Switch piano flush button 15 Amp single pole, one way, complete all as specified

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals.

Lamp holder, insulated body, with back plate for batten fittings, complete all as specified.

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 100W- 2 module including necessary connections complete all as spd and directed.

S & F in replacement LED batten alongwith 18W Linear tube with extruded aluminium/pc body and PC diffuser and inbuilt driver, 230 volts wall mounted complete with all accesssories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down old unsv tube light fitting any type.

S & F LED Building light LED 25W made out of pressure die cast aluminium body complete with all accesssories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size including GI pipe bracket 32 mm dia complete all as specified and as directed.

S & F mirror light 07 watt LED type with all accessories including inbuilt lamp connecting electrically to ceiling rose using cord flexible 3core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified. Make: C&S SIRIUS/10W or Crompton/Bajaj/Havells

Supply and Fixing exhaust fan AC single phase 230/240 volts of size 250mm sweep with loure of metalic body with grouting with nut bolts and making the suitable hole suitable for 300mm sweep exhaust fan by breaking the existing wall and making the plastering and matching with existing surface / specification and all as specified and directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 8 way double door open able complete, including taking out old unsv MCB DB any size/type.

S&F 6 to 32 A SP MCB single pole 240 V 10 KA C Series.

S&F MCB single pole with natural 240 volts 32 Amps .

S&F 40 Amps SPN MCB single pole 240 V 10 KA .

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

Supply and Install the electric water heater storage type 25 Ltr capacity 5 Star rated of ABS body vertical type glass lined of inner tank and heating element and having the wall mounting arrangement,thermostate,indicators and thermally insulated stainless steel tank of glass lined inside the tank and heating element with complete connection of water & testing and all as specified and directed.

Supply and Fixing LED Lamp 12 watt 230 volt all as specified and directed.Make-Philips/Syska/Crompton.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core complete all as specified and as directed.

M&L for tube , light grade galvanised with all fittings laid in trenches/through wall / under road or floor of 40 mm bore complete all as specified and as directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 12 way double door open able complete, including taking out old unsv MCB DB any size/type.

M & L for well burned bricks , laid flat ( old size) sub class B designation 75 for cable protection copmplete all as specifed and directed.

SUBASH MAHAJAN

M/s Rajeev Vashist

abrol enterprises

M/S J N TRADERS

Walia trading co

v k engineers and builders

KULBHUSHAN AGGARWAL

jagdish sons

M/S CANTILEVER ENGINEERS

VIJAY KUMAR LAKHNI

vivek and co