erection of poles

LT 3 Ph. 5 Wire Cross Arms

LT Pin Insulator

LT Shackle Insulator

M.S.Back Clamps suitable for 9.1 M PSCC Pole made from M.S Flat 50x6mm as per drawings enclosed. The Back Clamps shall painted with double coat of best quality Red Oxide paint. Net Weight of Each: 1.266Kgs. M.S.Back Clamps for 9.1M Pole Flat50x6mm

9.1M PSCC POLE-280KG WL

8.0M PSCC POLE-140KG WL

AAA conductor 34 Sq. mm

M.S.Stay Clamps for 9.1 M PSCC Pole

Stay clamp set-MSFlat 50x6mm-0.320Mx2

11KV MS Stay Sets with Clamps for 8Mtr

G.I.Stay Wire 7/3.15mm(10SWG)

LT Guy Insulators

MS Bolts & Nuts 16x130 mm(5/8 x 5")

ERECTION OF POLES IN LT LINES:, Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,fixing of Insulators/schakles,earthin g to supports,back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation, 9.1M long PSCC Pole.

Erection of 8Mtrs Stud Pole including fixing clamps and back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation - LT Line.

Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,earthing of supports,back filling with earth and stones properly ramming including transport of materials from road side to location excluding pit excavation, 9.1 M long PSCC pole.

Paving out conductor,providing temporary stays,tensioning,sagging correctly,fixing strain points,transferring to pin points binding,keeping stifner,rectification of poles,guys and jumpering etc.,final tensioning and loading with tractor including transport of Material from road side to location, LT 1-Phase (3 Conductors with conductor size of 34sqmm).

Loading of 9.1 M long PSCC poles.

Un-Loading of 9.1 M long PSCC poles.

Loading of 8.0 M long PSCC poles.

Un-Loading of 8.0 M long PSCC poles.

Excavation of Stay pits (PER PIT) in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasing) or Augur Machine, 1'6"x1'6"x4'6" (0.45M x 0.45M x 1.35M).

Fixing base plates,alignment of anchor rod,fixing of clamps,guy insulators,trunckle etc.,on the pole,fixing of stay wire,binding securely on either side and tensioning including transport of Material from road side to location and back filling with earth ramming as per standards (excluding cost of excavation pit and all aboveMaterial), LT Stay sets.

Excavation of pits (PER PIT) in all soils (except hard gravel,hard Morrum,disintegrated rock and hard rock requiring blasting) for line poles as well as Strut poles , 2'0"x2'6"x5'0" (0.6M x 0.75M x 1.50M) or 18" dia and 5'0" depth (0.45M dia 1.50M depth) with Augur Machine for 8.0 or 8.0M length R.S-Joist poles.

Excavation of pits (PER PIT)in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasting)for line poles as well as Strut poles , 2'6"x2'6"x6'0" (0.75M x 0.75M x 1.80M)or 20" dia and 6'0" depth (0.6M dia 1.80M depth) with Augur Machine for9.1M PSCC Poles or 11.0M PSCC Poles or R.S-Joist Poles of above8.M and below 12M length.

Concreting to a size of 2'6" x 2'6"' x 6'0" (0.75M x 0.75M x 1.8M) to line poles as well as strut pole with C.C (1:3:6) using 40mm HBGMetal - for 9.1M / 280 Kg PSCC Pole (Volume of pole for height of 1.80M from bottom of pole = 0.077 Cum)Volume of Concrete = 0.936 Cum.

LT 3 Ph. 5 Wire Cross Arms

LT Pin Insulator

LT Shackle Insulator

LT Metal parts/Hardware Fittings

M.S.Back Clamps suitable for 9.1 M PSCC Pole made from M.S Flat 50x6mm as per drawings enclosed. The Back Clamps shall painted with double coat of best quality Red Oxide paint. Net Weight of Each: 1.266Kgs. M.S.Back Clamps for 9.1MPole Flat50x6mm

9.1M PSCC POLE-280KG WL

8.0M PSCC POLE-140KG WL

AAA conductor 34 Sq. mm

M.S.Stay Clamps for 9.1 M PSCC Pole

Stay clamp set-MSFlat 50x6mm-0.320Mx2

MS Bolts & Nuts 16x130 mm(5/8 x 5")

ERECTION OF POLES IN LT LINES:, Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,fixing of Insulators/schakles,earthin g to supports,back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation, 9.1M long PSCC Pole.

Erection of 8Mtrs Stud Pole including fixing clamps and back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation - LT Line.

Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,earthing of supports,back filling with earth and stones properly ramming including transport of materials from road side to location excluding pit excavation, 9.1 M long PSCC pole.

Paving out conductor,providing temporary stays,tensioning,sagging correctly,fixing strain points,transferring to pin points binding,keeping stifner,rectification of poles,guys and jumpering etc.,final tensioning and loading with tractor including transport of Material from road side to location, LT 1-Phase (3 Conductors with conductor size of 34sqmm).

Loading of 9.1 M long PSCC poles.

Un-Loading of 9.1 M long PSCC poles.

Loading of 8.0 M long PSCC poles.

Un-Loading of 8.0 M long PSCC poles.

Excavation of pits (PER PIT) in all soils (except hard gravel,hard Morrum,disintegrated rock and hard rock requiring blasting) for line poles as well as Strut poles , 2'0"x2'6"x5'0" (0.6M x 0.75M x 1.50M) or 18" dia and 5'0" depth (0.45M dia 1.50M depth) with Augur Machine for 8.0 or 8.0M length R.S-Joist poles.

Excavation of pits (PER PIT)in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasting)for line poles as well as Strut poles , 2'6"x2'6"x6'0"(0.75M x 0.75M x 1.80M) or 20" dia and 6'0" depth (0.6M dia 1.80M depth) with Augur Machine for 9.1M PSCC Poles or 11.0M PSCC Poles or R.S-Joist Poles of above8.M and below 12M length.

LT 3 Ph. 5 Wire Cross Arms

LT Pin Insulator

LT Shackle Insulator

LT Metal parts/Hardware Fittings

M.S.Back Clamps suitable for 9.1 M PSCC Pole made from M.S Flat 50x6mm as per drawings enclosed. The Back Clamps shall painted with double coat of best quality Red Oxide paint. Net Weight of Each: 1.266Kgs. M.S.Back Clamps for 9.1M Pole Flat50x6mm

9.1M PSCC POLE-280KG WL

AAA conductor 34 Sq. mm

Stay clamp set-MSFlat 50x6mm-0.320Mx2

M.S.Stay Clamps for 9.1 M PSCC Pole

11KV MS Stay Sets with Clamps for 8Mtr

G.I.Stay Wire 7/3.15mm(10SWG)

LT Guy Insulators

11KV 'V' X-arm-MSChannel 75x40mm-1.407M

11KV Polymer Pin Insulators with Pin

8.0M PSCC POLE-140KG WL

MS Bolts & Nuts 16x130 mm(5/8 x 5")

ERECTION OF POLES IN LT LINES:, Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,fixing of Insulators/schakles,earthin g to supports,back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation, 9.1M long PSCC Pole.

Paving out conductor,providing temporary stays,tensioning,sagging correctly,fixing strain points,transferring to pin points binding,keeping stifner,rectification of poles,guys and jumpering etc.,final tensioning and loading with tractor including transport of Material from road side to location, LT 1-Phase (3 Conductors with conductor size of 34sqmm).

Loading of 9.1 M long PSCC poles.

Un-Loading of 9.1 M long PSCC poles.

Excavation of Stay pits (PER PIT) in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasing) or Augur Machine, 1'6"x1'6"x4'6" (0.45M x 0.45M x 1.35M).

Fixing base plates,alignment of anchor rod,fixing of clamps,guy insulators,trunckle etc.,on the pole,fixing of stay wire,binding securely on either side and tensioning including transport of Material from road side to location and back filling with earth ramming as per standards (excluding cost of excavation pit and all aboveMaterial), LT Stay sets.

Excavation of pits (PER PIT)in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasting)for line poles as well as Strut poles , 2'6"x2'6"x6'0" (0.75M x 0.75M x 1.80M) or 20" dia and 6'0" depth (0.6M dia 1.80M depth) with Augur Machine for 9.1M PSCC Poles or 11.0M PSCC Poles or R.S-Joist Poles of above 8.M and below 12M length.

Excavation of pits (PER PIT) in all soils (except hard gravel,hard Morrum,disintegrated rock and hard rock requiring blasting) for line poles as well as Strut poles , 2'0"x2'6"x5'0" (0.6M x0.75M x 1.50M) or 18" dia and 5'0" depth (0.45M dia 1.50M depth) with Augur Machine for 8.0 or 8.0M length R.S-Joist poles.

Erection of 8Mtrs Stud Pole including fixing clamps and back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation - LT Line.

Loading of 8.0 M long PSCC poles.

Un-Loading of 8.0 M long PSCC poles.

Dismantling of existing Lines including Loading,Transport and Un-Loading and devolution to District Stores, 55sqmm Single Circuit (3 Conductors).

Paving out conductor,providing temporary stays,tensioning,sagging correctly,fixing strain points,transferring to pin points binding,keeping stifner,rectification of poles,guys and jumpering etc.,final tensioning and loading with tractor including transport of Material from road side to location, 55sqmm Single Circuit (3 Conductors).

Dismantling of 8.0M PSCC pole which cannot be Re-Used - 11KV Lines.

Erection of LT S-Ph 3 W/L X-arm on already existing poles.

ERECTION OF POLES IN 11KV LINES:, Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,fixing of Insulators/Discs,earthing to supports,back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation, 9.1M long PSCC Pole.

Erection of 8Mtrs Stud Pole including fixing clamps and back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation - 11KV Line.

LT 3 Ph. 5 Wire Cross Arms

LT Shackle Insulator

LT Metal parts/Hardware Fittings

M.S.Back Clamps suitable for 9.1 M PSCC Pole made from M.S Flat 50x6mm as per drawings enclosed. The Back Clamps shall painted with double coat of best quality Red Oxide paint. Net Weight of Each: 1.266Kgs. M.S.Back Clamps for 9.1M Pole Flat50x6mm

9.1M PSCC POLE-280KG WL

8.0M PSCC POLE-140KG WL

AAA conductor 34 Sq. mm

M.S.Stay Clamps for 9.1 M PSCC Pole

Stay clamp set-MSFlat 50x6mm-0.320Mx2

11KV MS Stay Sets with Clamps for 8Mtr

G.I.Stay Wire 7/3.15mm(10SWG)

LT Guy Insulators

MS Bolts & Nuts 16x130 mm(5/8 x 5")

ERECTION OF POLES IN LT LINES:, Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,fixing of Insulators/schakles,earthin g to supports,back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation, 9.1M long PSCC Pole.

Erection of 8Mtrs Stud Pole including fixing clamps and back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation - LT Line.

Paving out conductor,providing temporary stays,tensioning,sagging correctly,fixing strain points,transferring to pin points binding,keeping stifner,rectification of poles,guys and jumpering etc.,final tensioning and loading with tractor including transport of Material from road side to location, LT 1-Phase (3Conductors with conductor size of 34sqmm).

Loading of 9.1 M long PSCC poles.

Un-Loading of 9.1 M long PSCC poles.

Loading of 8.0 M long PSCC poles.

Un-Loading of 8.0 M long PSCC poles.

Excavation of Stay pits (PER PIT) in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasing) or Augur Machine, 1'6"x1'6"x4'6" (0.45M x 0.45M x 1.35M).

Fixing base plates,alignment of anchor rod,fixing of clamps,guy insulators,trunckle etc.,on the pole,fixing of stay wire,binding securely on either side and tensioning including transport of Material from road side to location and back filling with earth ramming as per standards (excluding cost of excavation pit and all aboveMaterial), LT Stay sets.

Excavation of pits (PER PIT) in all soils (except hard gravel,hard Morrum,disintegrated rock and hard rock requiring blasting) for line poles as well as Strut poles , 2'0"x2'6"x5'0" (0.6M x 0.75M x 1.50M) or 18" dia and 5'0" depth (0.45M dia 1.50M depth) with Augur Machine for 8.0 or 8.0M length R.S-Joist poles.

Excavation of pits (PER PIT)in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasting)for line poles as well as Strut poles , 2'6"x2'6"x6'0" (0.75M x 0.75M x 1.80M) or 20" dia and 6'0" depth (0.6M dia 1.80M depth) with Augur Machine for 9.1M PSCC Poles or 11.0M PSCC Poles or R.S-Joist Poles of above 8.M and below 12M length.

Paving out conductor,providing temporary stays,tensioning,sagging correctly,fixing strain points,transferring to pin points binding,keeping stifner,rectification of poles,guys and jumpering etc.,final tensioning and loading with tractor including transport of Material from road side to location, LT 3-Phase (5 Conductors with conductor size of 34sqmm).

LT 3 Ph. 5 Wire Cross Arms

LT Pin Insulator

LT Shackle Insulator

LT Metal parts/Hardware Fittings

M.S.Back Clamps suitable for 9.1 M PSCC Pole made from M.S Flat 50x6mm as per drawings enclosed. The Back Clamps shall painted with double coat of best quality Red Oxide paint. Net Weight of Each: 1.266Kgs. M.S.Back Clamps for 9.1M Pole Flat50x6mm

9.1M PSCC POLE-280KG WL

8.0M PSCC POLE-140KG WL

AAA conductor 34 Sq. mm

M.S.Stay Clamps for 9.1 M PSCC Pole

Stay clamp set-MSFlat 50x6mm-0.320Mx2

11KV MS Stay Sets with Clamps for 8Mtr

G.I.Stay Wire 7/3.15mm(10SWG)

LT Guy Insulators

MS Bolts & Nuts 16x130 mm(5/8 x 5")

ERECTION OF POLES IN LT LINES:, Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,fixing of Insulators/schakles,earthin g to supports,back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation, 9.1M long PSCC Pole.

Erection of 8Mtrs Stud Pole including fixing clamps and back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation - LT Line.

Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,earthing of supports,back filling with earth and stones properly ramming including transport of materials from road side to location excluding pit excavation, 9.1 M long PSCC pole.

Paving out conductor,providing temporary stays,tensioning,sagging correctly,fixing strain points,transferring to pin points binding,keeping stifner,rectification of poles,guys and jumpering etc.,final tensioning and loading with tractor including transport of Material from road side to location, LT 1-Phase (3 Conductors with conductor size of 34sqmm).

Loading of 9.1 M long PSCC poles.

Un-Loading of 9.1 M long PSCC poles.

Loading of 8.0 M long PSCC poles.

Un-Loading of 8.0 M long PSCC poles.

Excavation of pits (PER PIT) in all soils (except hard gravel,hard Morrum,disintegrated rock and hard rock requiring blasting) for line poles as well as Strut poles , 2'0"x2'6"x5'0" (0.6M x 0.75M x 1.50M) or 18" dia and 5'0" depth (0.45M dia 1.50M depth) with Augur Machine for 8.0 or 8.0M length R.S-Joist poles.

Excavation of pits (PER PIT)in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasting)for line poles as well as Strut poles , 2'6"x2'6"x6'0"(0.75M x 0.75M x 1.80M) or 20" dia and 6'0" depth (0.6M dia 1.80M depth) with Augur Machine for 9.1M PSCC Poles or 11.0M PSCC Poles or R.S-Joist Poles of above 8.M and below 12M length.

Excavation of Stay pits (PER PIT) in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasing) or Augur Machine, 1'6"x1'6"x4'6" (0.45M x 0.45M x 1.35M).

Fixing base plates,alignment of anchor rod,fixing of clamps,guy insulators,trunckle etc.,on the pole,fixing of stay wire,binding securely on either side and tensioning including transport of Material from road side to location and back filling with earth ramming as per standards (excluding cost of excavation pit and all aboveMaterial), LT Stay sets.

LT 3 Ph. 5 Wire Cross Arms

LT Pin Insulator

LT Shackle Insulator

LT Metal parts/Hardware Fittings

M.S.Back Clamps suitable for 9.1 M PSCC Pole made from M.S Flat 50x6mm as per drawings enclosed. The Back Clamps shall painted with double coat of best quality Red Oxide paint. Net Weight of Each: 1.266Kgs. M.S.Back Clamps for 9.1M Pole Flat50x6mm

9.1M PSCC POLE-280KG WL

8.0M PSCC POLE-140KG WL

AAA conductor 34 Sq. mm

M.S.Stay Clamps for 9.1 M PSCC Pole

Stay clamp set-MSFlat 50x6mm-0.320Mx2

11KV Polymer Pin Insulators with Pin

11KV or LT Top Fitting with clamp-0.300M

MS Bolts & Nuts 16x130 mm(5/8 x 5")

ERECTION OF POLES IN LT LINES:, Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,fixing of Insulators/schakles,earthin g to supports,back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation, 9.1M long PSCC Pole.

Erection of 8Mtrs Stud Pole including fixing clamps and back filling with earth and stones property ramming including transport ofMaterials from road side to location excluding pit excavation - LT Line.

Erection of pole in position,aligning and setting to work,fixing of cross arms and top clamps,earthing of supports,back filling with earth and stones properly ramming including transport of materials from road side to location excluding pit excavation, 9.1 M long PSCC pole.

Paving out conductor,providing temporary stays,tensioning,sagging correctly,fixing strain points,transferring to pin points binding,keeping stifner,rectification of poles,guys and jumpering etc.,final tensioning and loading with tractor including transport of Material from road side to location, LT 1-Phase (3 Conductors with conductor size of 34sqmm).

Loading of 9.1 M long PSCC poles.

Un-Loading of 9.1 M long PSCC poles.

Loading of 8.0 M long PSCC poles.

Un-Loading of 8.0 M long PSCC poles.

Excavation of pits (PER PIT) in all soils (except hard gravel,hard Morrum,disintegrated rock and hard rock requiring blasting) for line poles as well as Strut poles , 2'0"x2'6"x5'0" (0.6M x 0.75M x 1.50M) or 18" dia and 5'0" depth (0.45M dia 1.50M depth) with Augur Machine for 8.0 or 8.0M length R.S-Joist poles.

Excavation of pits (PER PIT)in all soils (except hard gravel,hardMorrum,disinte grated rock and hard rock requiring blasting)for line poles as well as Strut poles , 2'6"x2'6"x6'0"(0.75M x 0.75M x 1.80M) or 20" dia and 6'0" depth (0.6M dia 1.80M depth) with Augur Machine for 9.1M PSCC Poles or 11.0M PSCC Poles or R.S-Joist Poles of above 8.M and below 12M length.

Fixing of 11KV Polymer Pin Insulators with G.I Pins on already existing poles.

Erection of 11KV Top fittings with clamps on already existing poles.