Karnataka

AOC

Works

Buildings

Maintenance and Repairs of Accountants designated quarters at BB Road in Chikkaballapura Town.

Public Works Department

PWD Division Office Chikkaballapura | Karnataka

Amount: Refer DocsCloses: 2 Mar 2026Closed

Timeline

Published21 Feb 2026
Closed2 Mar 2026
Awarded—

Bids

1 Bid2 Mar 2026

#	Company	Amount	Status
1	RAJENDRA REDDY ₹2.5 Laccepted-aoc	₹2.5 L	accepted-aoc

Tender Value

Refer Docs

EMD Value

₹7,500

Closing Date

2 Mar 2026, 8:42 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Mobile Number

Work Description

Maintenance and Repairs of Accountants designated quarters at BB Road in Chikkaballapura Town.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT33956

Reference Number

PWD/2025-26/BD/WORK_INDENT33956

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Chikkaballapura

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual turnover certificate issued by Chartered accountant with UDIN Number along with balance sheets for past 5 years i.e 2020-21 to 2024-25 if UDIN & BALANCE SHEETS NOT mentioned/SUBMITTED tender will be rejected

RequiredKPWD CLASS Iv And Above Registration

RequiredAssessed available tender capacity

RequiredExisting & Ongoing Commitment Statement-IF EXISTING COMMITMENTS/AWARDED TENDERS NOT SUBMITTING PROPERLY/MISREPRESENTED, BIDS WILL BE REJECTED

RequiredWork done certificate issued by not below the rank of Executive Engineer

RequiredValid GST Certificate

RequiredIF EXISTING COMMITMENTS/AWARDED TENDERS NOT SUBMITTING PROPERLY/MISREPRESENTED, BIDS WILL BE REJECTED

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details.Total value of civil engineering works executed and payments received in the last five years (year-wise).List of existing commitments and ongoing work.List of works for which tenders already submitted.Banker Details.

Conditional tenders will not be accepted. The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The cost of the Tender form shall not be refundable. The employer is not responsible for any delay in accessing kpp Portal. All the formats prescribed in the bid document shall be filled by the tenderer in complete. All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval. The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons. The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents Contractors Should be registered with KPWD as Class-IV& above Contractor and further orders thereon.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work. The tenderer should maintain the Road/Bridge/ Culvert/Building works during the defective liability period for 1 years. The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given in clause 24.1 of ITT for an amount equivalent to 5% of the Contract price plus additional security deposit for unbalanced tenders in accordance with clause 24.3 of ITT and clause 44 of the conditions of contract for all works. Contractor should take all precautions to ensure that no damage is caused to any adjacent structures/utilities above or below the ground and also to the existing canal CD works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost. Damage to physical property and personal injury and death will be the personal risk of the contractor.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent. Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost. For SC & ST Contractors :- As per G.O.No.FD 876 EXP-12/2017, Bangalore Dt:10-10- 2017 Security Deposit for an amount equivalent to 5% of the Contract price shall be deducted in every running bill. However, in case of 1st & Final bill the entire security deposit will be deducted from the final bill. (If applicable) Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division, Chickaballapur during office hours on all working days. Materials like bitumen or steel,cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work. Contractor should follow strictly the prevailing rules of labour act & the contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009, negative tenders for labour portion will be rejected. (If applicable) Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders. As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund. The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria attested by registered Chartered Accountant, along with UDIN else will be treated as invalid.

Participating agencies should compulsorily possess GST and PAN numbers. GST number should be valid and in force at the time of participation. As per Government circular no: FD 355 EXP-12/2024 dtd:01.08.2024, Letter of Intent (LoI) will be issued in Karnataka Public Procurement Portal 2.0 software, contractor has to accept LOI online and submit the BGs through KPP portal within 05days. if not, tender will be rejected as per Guidelines. .Roads shall be maintained for one year.

IF EXISTING COMMITMENTS/AWARDED TENDERS NOT SUBMITTING PROPERLY/MISREPRESENTED, BIDS WILL BE REJECTED

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹7,500

Important Dates

Last Activity

2 Mar 2026

Published

21 Feb 2026

Download Ends

27 Feb 2026

BOQ Preview

•

Maintenance and Repairs of Accountants designated quarters at BB Road in Chikkaballapura Town.

•

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges a...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Premium ---- including the cost and conveyan...

•

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- including the cost and...

•

Providing and fixing Single lever wall mixer made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- including the cost and conveyanc...

•

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- including the cost and conveyance of all mat...

•

Providing and fixing Single flow hand showers with Anti lime jets with Rain, Mist & Massage settings having 1.5m Extendable flexible tube and holder & wall flange made of Stainless steel with all co...

•

Providing & fixing fly proof wire gauze to windows, clerestory windows

•

& doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised

•

M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm ---- including the cost and conveyance of all materials...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 200mm ---- including the cost and conveyance of all ...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 200x10mm ---- including the cost and conveyance of all ma...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm ---- including the cost and conveyance of all materials...

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type

•

Fastener with t...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, fac...

•

Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and m...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5star rating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated power up to 35...

•

Supply of round/square recess/surface mounted rolling type LED Down light with .WGU10 LED Lamp Rib Fabricated from die cast aluminium with white powder coated prewired to mains connector & has swivell...

•

Supplying.litrescapacityvertical/horizontaltypewallmountingElectricalwaterheaterwith22SWGcopper/SSsheetmetalinnerContainertinnedinsideandanticorrosivepaintoutsideand20SWGM.S.sheetmetaloutercoverfilled...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1 B D - ACCOUNTS QTRS 3 LKS - 33956 OTHER.doc

Tender Document • 1.47 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

RAJENDRA REDDY

₹2.5 Laccepted-aoc