Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance OPPOSITE RADIO STATION TOWER TILAK NAGAR SAGAR ROAD BIKANER 334001 RAJASTHAN | BIKANER | RAJASTHAN | 334001 | Admitted-Finance |
Tender Value
₹42.9 L
EMD Value
₹85,760
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH BIKANER
GE NORTH BIKANER RAJASTHAN
PROVN OF SINGLE JCOS LIVING ACCN UNDER AGE BR I AT MIL STN BIKANER
2022_MES_559537_1
TOKEN 62 OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
270 days
GE NORTH BIKANER
Class D category a i
6 documents required · 6 mandatory
₹500
GE NORTH BIKANER
₹85,760
Yes
2 Dec 2022
22 Oct 2022
29 Nov 2022
22 Oct 2022
21 Nov 2022
7 Nov 2022
Amount
Surface dressing n exc 15 Cm deep as in loose / soft soil complete all as specified.
Excavation in trenches n.exc 1.5m wide and n. exc 1.5m in depth ; for foundation getting out of loose / soft soil complete all as specified.
Excavation in trenches exc 1.5m wide and n. exc 3.0m in depth ; for foundation getting out of loose / soft soil complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.
M&L PCC 1:4:8 type D-2 using 40mm graded stone agregate as in foundations,filling and mass complete all as specified and as directed.concrete.
M&L for RCC design Mix M-25 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L RCC design Mix M-25 using 20mm graded stone aggregate as in columns , pillars , piers , posts & sruts complete all as specified.
M&L RCC design Mix M-25 using 20mm graded stone aggregate as in lintel Band , Beams & Cantilevers complete all as specified.
M&L RCC design Mix M-25 using 20mm graded stone aggregate as in chajja complete all as specified.
M&L RCC design Mix M-25 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified.
M&L RCC design Mix M-25 using 20mm graded stone aggregate as in parapet wall and downward facia complete all as specified.
M&L for RCC Design Mix M-25 as in columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level complete.
M&L formwork to sides of parapet & downward facia and cupboard etc for fair finished flat surface complete all as specified.
M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter complete
M&L formwork to sides of columns , pillars , posts , struts etc for fair finished flat surface complete all as specified.
M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding n exc 200 mm wide
M&L for formwork to sides & bottom of chajja complete all as specified.
M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of rough finished sur faces of concrete flat surface complete all as specified.
M&L Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) of rough finished sur faces of concrete flat surface complete all as specified.
M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.
M&L for TMT bars 6mm to 8mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.
M&L for TMT bars 5 mm to 10 mm dia in reinforcement, cut to length, bent to shape required as in stirrups and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.
M&L for Sand filling under floors including watering , ramming and consolidation complete all as specified.
Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)
Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
M&L Brick work with fly ash bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6
M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 comp all as specifeid.
M&L Brickwork with flyash brick (old size), straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 Complete all as specified.
M&L 10 mm thick internal plaster in CM (1:6) on other than fair face of brick work surface finish even & smooth without using extra cement complete all as specified.
M&L 15 mm thick external plaster in CM(1:4) on fair face of brick work surface finished even & smooth without using extra cement with WPC complete all as specified.
M&L 5mm thick cement plaster in CM (1:3) Ceiling complete all as specified.
M&L for 10mm thick Rendering in cement mortar 1: 3 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instruction. (Note :- Water proofing compound shall be measured and paid separately)
M&L 75mm thick PCC 1:4:8 type D2 using 40mm thick graded stone aggregate as sub base in floors complete all as specified.
M&L 25mm thick PCC 1:2:4 type B-O using 12.5mm thick graded stone aggregate as in flooring complete all as specified.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types as in platform complete all as specified and directed.
PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling in pressed steel frames complete all as specified and as directed by Engineer-in-Charge
S&F factory made mild steel Window box type with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all specified with and including arragement for cooler/AC as directed by Engineer-in-Charge. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately iii) opening incl provn shutter for cooler to be provided
S&F 4 mm thick Sheet glass ordinary quality and glazing with oil putty in square n exec 0.5 sqm in each pane.
S&F 4 mm thick Frosted glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified
M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified
S&F factory made 2nd class hard wood 35mm thick plain framed panelled shutter two panels with lock rail and panels of 9mm BWP commercial ply or 12mm veneered on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge.
S&F Second class hardwood glazed and skeleton door shutters 35mm thick, with intermidiate support, open rebated and prepared to receive glass, gauze, etc (with rebated sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture1.40mm
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.
Supply and fixing of 100 mm But hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.
S&F steel locking bolts with mils steel electrogalvanised plate and bright bolt ont less than 10 mm dia and 100 mm size, complete all as specified .
S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.all as specified and directed.
S&F for 150mm size aluminium anodised handle of febricated type and fixed.all as specified and directed.
Material and labour for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover plate 150 mm complete
S&F 300mm, ordinary rat tail rod patttern springs including roller and roller plate complete all as specified
S&F20 mm dia decorative drapary curtain road with bibs, braked & internal funnels. complete all as specified.
M & L for applying a priming coat of cold bitumen primer @ 0.40 ltr/sqm as per para 11.44.5 of MES SSR Part-I complete.
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified
M&L for Lime concrete terracing as on roof with mimimum thickness of edge 40 mm and increasing uniformly towards ridge to obtain a certain chain slope of (1:40) Complete all as specified and directed.
M&L for 40 mm thick brunt clay brick tiles bedded on 15mm thick CM 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified.
Supply only Integral waterproofing compound ISI marked.
M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in bed blocks, plinth courses, string courses , lacing courses or other structural section as directed.
M&L cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, sub base and mass concrete all as specified.
M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified.
M&L for glazed coloured ceramic tiles 7 mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 sqm (i.e 450mmx300mm or as directed), on vertical surfaces such as dado, skiting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab jointless joint including rubbing and mirror polishing complete all as specified.
M&L for Kota stone slab 20-25mm thick in riser & tread of steps (in single piece), skirting, dado, as in shelves and pillar laid over 1:3 cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.
M&L for 100mm wide marble white strip 14-16mm thick machine cut bedded jointed with grey cement slurry mixed with pigment to match the shade of the slab includding rubbing and polishing complete all as specified.
Moulding of edges to kota/marble/granite stone full round as in steps,cooking platform, and other similar situation complete all as specified
M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces. (Note : The contractor shall have no claim on diffrence what so ever on shade/colour of tiles)
S&F 1.25 mm thick Mild steel, plain, black sheet in wall cladding, covering to door shutters; steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors icl hinges and all necessary arrangement; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 all as specified .
M & L 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.
M & L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.
M & L 40 mm bore galvanised steel water tubing medium grade (ISI Marked) as in spot pipe with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.
S&F 500 ltr Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I,, including Ball brass valves, high pressure, with polythene float and flynut com
S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed
S&F Viterous china wash down water closet pan (padestal type), white (excluding flushing cistern, flush pipe. ( Make: CERA, Perryware, Hindware)
S&F PVC seat & jet for EWC with and including holding down bits
S&F PVC flushing cistern 10 ltrs capacity incl flushing pipe and connections complete. as approved by Engineer in charge,low level, white with inlet, ball valve ,complete including connection to pipe all as specified.
S&F Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including brackets & waste pipe etc complete all as specified.
S&F 15mm bore PVC connection with PTMT nuts length 450 mm
S&F 32 mm size cp waste coupling (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) incl waste pipe
S&F fancy type chromium plated Angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified
S&F 15 mm bore centre hole Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as spfd.
S&F chromium plated long body Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia
S&F chromium plated Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia
S&F Brass chromium plated shower rose 125 mm size with and incl shower arm
S&F 15 mm bore brass fancy concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe
S&F Towel rail of PTMT/SS with and incl chromium plated brass screws and wooden /plastic cleats approved by Engineer in charge.
S&F stainless steel peg set of 6 peg foldable or fixed complete all as specified & directed by Engineer-in-charge
S&F soap dish Make Jaquar/ cera or eqivalent
S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches all as specified.
S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to wall all as specified.
S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches all as specified.
S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall all as specified.
S&F cast iron vent cowl for 75 m dia pipe. all as specified.
S&F Cast iron bend (any radius) diminishing pieces or tapers/ Reducers/ Sockets 100mm bore fitted with oval access door. all as specified.(Larger bore measured)
S&F Cast iron bend (any radius) diminishing pieces or tapers/ Reducers/ Sockets 75mm bore fitted with oval access door all as specified..(Larger bore measured)
M&L for Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 75 mm bore
M&L for Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 100 mm bore
S&F cast iron Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches/ Junction box 100 mm bore fixed in repair with oval access door all as specified.
S&F cast iron Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches/ Junction box 75 mm bore fixed in repair with oval access door all as specified.
S&F 75 mm bore CI floor trap plain one way/two way with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
M&L PVC (SWR)/CI gully trap 125/110 mm, setting and jointing with solvent cement
S&F stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 75mm bore pipe
S&F stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 100mm bore pipe
M & L for Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete
M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.
M & L for three coats of white wash on roof ceiling including preparation of newly plastered surfaces complete all as specified.
M & L for three coats of white wash on wall including preparation of newly plastered surfaces complete.
M&L for two coats of distemper oil emulsion over a coat of primer incl 2mm thick birla wall care putty on newly plaster surfaces of walls incl preparation of surfaces complete all as specified..
M & L for preparation of new surfaces of walls/ceiling incl pillar etc. and applying two coat of exterior emulsion/weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry - 215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and as directed by GE.
M&L for preparation of new wooden surface of any desccription over 10cm width or girth and applying two coat Synthetic enamel paint over one coat of pink primer complete.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete.
M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete
M & L for point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on GI sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by Engr-in-Charge for the following :- (a) One Light/fan/Ex-fan point controlled by one switch.
(b)One 3pin 5 amps socket point on the same board complete
(c) One 3 pin 5 amps socket on independent board.
all as per item No 1 above but with 4.0 sqmm copper wire for 3,5 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.
S&F switch piano type, 5 Amp, single pole one way, 230 Volts, flush type complete all as specified and as directed by Engr- in -charge.
S&f Switch piano flush type single pole, one way 15/20 Amps 230 Volts complete all as specified & directed by Engr-in-Charge.
M&L socket outlet 3 Pin 5 Amps flush type 230 Volts complete all as specified and directed by Engr-in-Charge.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.
S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.
supply and fixing fan regulator electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.HAVELLS CAT PART NO-ENDURALINEARNEOBS10WLED865SPCWH/WIPRO CAT PART NO-LL20-111-XXX-65NE3/BCLSB 10 WH
S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Philips-BN021 LED 20S PSU CW GR S2/ Crompton Greaves LDDR20-CDL Dazzle Ray / bajaj-BCLAB 20W
M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S&F sheet metal enclosure MCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed. Make:- Hegar/Legrand/Seimens
S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.
S & F MCB SPN, 6-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge.
S & F MCB SP, 6-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.
S&F MCCB 100 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.
S&F MCCB 40 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.
M&L for submain wiring using 2 runs of single core FRLSH PVC insulated, unsheathed stranded copper conductor cable of size 2runs of 6 Sqmm of voltage rating 1100V for Single phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLSH PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-2 runs of single core FRLSH PVC cable 6sqmm for Single phase & neutral with one run of earth conductor as earth and conduit shall be measured as one unit)
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed by Engineer-In-Charge.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.
S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.
S & F water heater storage type 25 Ltr capacity, BEE 5 star and 8 bar pressure rated stainless steel (minimum wall thickness 2 mm) tank with feroglass coated inner container energy saving high density PUF insulation vertical ABS shock proof plastic body grouting of studs in wall in cement motar (1:3) nuts, washers, provision of two Nos PVC braided connection 450mm long heavy duty with brass nuts and two Nos brass chromium plated angular valve,thermostate,NRV ,TOP PLUG 20AMP with valve flange suitable for 15mm bore pipe for water supply connection complete. Make : Havells (Model -Monza EC) Cat part No GHWAMFSWH025/Bajaj calenta storage/Cromton solarium Qube
Supply & Fixed on walls and ceiling or laid in floor/in tranch and jointing GI tubes, 15 mm dia medium grade in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in wall complete all as specified and directed by Engr-in-charge .
supply and fixing Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .