REPAIR AND MAINT OF STANDBY DG SETS AND CONNECTED ACCESSORIES AT VARIOUS LOCATIONS UNDER GE 874 EWS

Amount

M&L for Disconnecting, taking out and opening of DG set 250/200 KVA by unscrewing nuts, bolts and servicing of DG set with checking of lubricating oil, coolant, V belt, greasing and oiling of parts and topping up necessary oils, cleaning the inner body, tank and radiator by removing sludge etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set and testing complete all as specified and directed. installed at different location of AOR of GE 874 EWS. Note :- Cost of spares/parts mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables and spares are included.

Supply Only of Fuel filter of DG set 250/200 KVA complete all as specified and directed.

Supply Only of Lube oil filter of DG set 250/200 KVA complete all as specified and directed.

Supply Only of Air filter of DG set 250/200 KVA complete all as specified and directed.

Supply Only of Cooper washer of DG set 250/200 KVA complete all as specified and directed.

Supply Only of Banjo bolt of DG set 250/200 KVA complete all as specified and directed.

Supply Only of Fuel pipe of DG set 250/200 KVA complete all as specified and directed.

Supply Only of Hose water pipe for radiator of DG set 250/200 KVA complete all as specified and directed.

Supply Only of Warm drive H/clip of DG set 250/200 KVA complete all as specified and directed.

Supply Only of V-belt of DG set 250/200 KVA complete all as specified and directed.

M&L for disconnecting, taking out and opening of DG set 125/ 100 KVA by unscrewing nuts, bolts and servicing of DG set with checking of lubricating oil, coolant, V belt, greasing and oiling of parts and topping up necessary oils, cleaning the inner body, tank and radiator by removing sludge etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set and testing complete all as specified and directed. installed at different location of AOR of GE 874 EWS. Note :- Cost of spares/parts mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables and spares are included.

Supply Only of Fuel filter of DG set 125/ 100 kVA complete all as specified and directed.

Supply Only of Lube oil filter of DG set 125/ 100 kVA complete all as specified and directed.

Supply Only of Air filter of DG set 125/ 100 kVA complete all as specified and directed.

Supply Only of Cooper washer of DG set 125/ 100 kVA complete all as specified and directed.

Supply Only of Banjo bolt of DG set 125/ 100 kVA complete all as specified and directed.

Supply Only of Fuel pipe of DG set 125/ 100 kVA complete all as specified and directed.

Supply Only of Hose water pipe for radiator of DG set 125/ 100 kVA complete all as specified and directed.

Supply Only of Warm drive H/clip of DG set 125/ 100 kVA complete all as specified and directed.

Supply Only of V-belt of DG set 125/ 100 kVA complete all as specified and directed.

M&L for Disconnecting, taking out and opening of DG set 82.5 KVA by unscrewing nuts, bolts and servicing of DG set with checking of lubricating oil, coolant, V belt, greasing and oiling of parts and topping up necessary oils, cleaning the inner body, tank and radiator by removing sludge etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set and testing complete all as specified and directed. installed at different location of AOR of GE 874 EWS. Note :- Cost of spares/parts mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables and spares are included.

Supply Only of Fuel filter of DG set 82.5 kVA complete all as specified and directed.

Supply Only of Lube oil filter of DG set 82.5 kVA complete all as specified and directed.

Supply Only of Air filter of DG set 82.5 kVA complete all as specified and directed.

Supply Only of Cooper washer of DG set 82.5 kVA complete all as specified and directed.

Supply Only of Banjo bolt of DG set 82.5 kVA complete all as specified and directed.

Supply Only of Fuel pipe of DG set 82.5 kVA complete all as specified and directed.

Supply Only of Hose water pipe for radiator of DG set 82.5 kVA complete all as specified and directed.

Supply Only of Warm drive H/clip of DG set 82.5 kVA complete all as specified and directed.

Supply Only of V-belt of DG set 82.5 kVA complete all as specified and directed.

M&L for Disconnecting, taking out and opening of DG set 75/63/62.5/50 KVA by unscrewing nuts, bolts and servicing of DG set with checking of lubricating oil, coolant, V belt, greasing and oiling of parts and topping up, cleaning the inner body, tank and radiator by removing sludge etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set and testing complete all as specified and directed. installed at different location of AOR of GE 874 EWS. Note :- Cost of spares/parts mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables and spares are included.

Supply Only of Fuel filter of DG set 75/63/62.5/50 KVA complete all as specified and directed.

Supply Only of Lube oil filter of DG set 75/63/62.5/50 KVA complete all as specified and directed.

Supply Only of Air filter of DG set 75/63/62.5/50 KVA complete all as specified and directed.

Supply Only of Cooper washer of DG set 75/63/62.5/50 KVA complete all as specified and directed.

Supply Only of Banjo bolt of DG set 75/63/62.5/50 KVA complete all as specified and directed.

Supply Only of Fuel pipe of DG set75/63/62.5/50 KVA complete all as specified and directed.

Supply Only of Hose water pipe for radiator of DG set 75/63/62.5/50 KVA complete all as specified and directed.

Supply Only of Warm drive H/clip of DG set75/63/62.5/50 KVA complete all as specified and directed.

Supply Only of V-belt of DG set 75/63/62.5/50 KVA complete all as specified and directed.

M&L for Disconnecting, taking out and opening of DG set 40/35/25/15 KVA by unscrewing nuts, bolts and servicing of DG set with checking of lubricating oil, coolant, V belt, greasing and oiling of parts and topping up, cleaning the inner body, tank and radiator by removing sludge etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set and testing complete all as specified and directed. installed at different location of AOR of GE 874 EWS. Note :- Cost of spares/parts mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables and spares are included.

Supply Only of Fuel filter of DG set 40/35/25/15 KVA complete all as specified and directed.

Supply Only of Lube oil filter of DG set 40/35/25/15 KVA complete all as specified and directed.

Supply Only of Air filter of DG set 40/35/25/15 KVA complete all as specified and directed.

Supply Only of Cooper washer of DG set 40/35/25/15 KVA complete all as specified and directed.

Supply Only of Banjo bolt of DG set 40/35/25/15 KVA complete all as specified and directed.

Supply Only of Fuel pipe of DG set 40/35/25/15 KVA complete all as specified and directed.

Supply Only of Hose water pipe for radiator of DG set 40/35/25/15 KVA complete all as specified and directed.

Supply Only of Warm drive H/clip of DG set 40/35/25/15 KVA complete all as specified and directed.

Supply Only of V-belt of DG set 40/35/25/15 KVA complete all as specified and directed.

M&L for Overhaul of DG Set to include disconnecting, taking out and opening of DG set, head job of 250/200/125/100 KVA gen set etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set, any machining works (such as grinding, milling, Lathe and other jobs), any other job to make the DG Set operational and testing complete all as specified and directed. (The DG Set shall be provided with an all inclusive warranty period of 365 days (of running time) from the date of making the DG set operational. Any off road period during this warranty time will sufficiently enhance the warranty duration) Note :- Cost of spares/ parts/ jobs mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables, spares and jobs are included.

Head facing/Grinding Job

Supply Only of Inlet/Exhaust Valve

Supply Only of Oil Valve Seal

Supply Only of Valve Spring

Supply Only of Valve Guide

Supply Only of Valve seat Inlet/Exhaust

F.I.P Calbiration, cleaning and repair Job (upto250 kVA DG Set)

Injector Nozzel

Supply Only of Began

Supply Only of Linear

Supply Only of Piston

Supply Only of Ring Set

Supply Only of Main Began Bearing

Supply Only of Connecting Rod Bush

Supply Only of Cylinder Rubber Kit

Supply Only of Hose Kit

Supply Only of Benjo

Supply Only of Non Return Valve (NRV)

Supply Only of Fevibond/ epoxy/ cyanoacrylate, as required for complete overhaul of the DG Set

Supply Only of Battery Charger (smart, fast charging type, with both DC and AC inputs)

Supply Only of Battery Terminals

Supply Only of Head Guide

Supply Only of Water Pump

Dynamo Repair Job

Self Starter Repair Job

Supply Only of Starter Switch 24v

Supply Only of Feed Pump

Supply Only of AVR

Supply Only of Head Gasket

Supply Only of Belt Small

Supply Only of Belt Large

Supply Only of Rocker Set/ assembly

Supply Only of Turbo Drain Pipe

Supply Only of Packing Kit, complete for the overhaul

Supply Only of Fuel Pipe

Supply Only of House Connection

Supply Only of Copper Washers

Connecting Rod alignment Job, including any stores required for renewal.

Supply Only of Connecting Rod

Transportation required to work site and back/ for shifting of DG Set from one location to another

M&L for Overhaul of DG Set to include disconnecting, taking out and opening of DG set, head job of 82.5 KVA gen set etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set, any machining works (such as grinding, milling, Lathe and other jobs), any other job to make the DG Set operational and testing complete all as specified and directed. (The DG Set shall be provided with an all inclusive warranty period of 365 days (of running time) from the date of making the DG set operational. Any off road period during this warranty time will sufficiently enhance the warranty duration) Note :- Cost of spares/ parts/ jobs mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables, spares and jobs are included.

Head facing/Grinding Job

Supply Only of Inlet/Exhaust Valve

Supply Only of Oil Valve Seal

Supply Only of Valve Spring

Supply Only of Valve Guide

Supply Only of Valve seat Inlet/Exhaust

F.I.P Calbiration, cleaning and repair Job (82.5/ 75 kVA DG Set)

Injector Nozzel

Supply Only of Began

Supply Only of Linear

Supply Only of Piston

Supply Only of Ring Set

Supply Only of Main Began Bearing

Supply Only of Connecting Rod Bush

Supply Only of Cylinder Rubber Kit

Supply Only of Hose Kit

Supply Only of Benjo

Supply Only of Non Return Valve (NRV)

Supply Only of Fevibond/ epoxy/ cyanoacrylate, as required for complete overhaul of the DG Set

Supply Only of Battery Charger (smart, fast charging type, with both DC and AC inputs)

Supply Only of Battery Terminals

Supply Only of Head Guide

Supply Only of Water Pump

Dynamo Repair Job

Self Starter Repair Job

Supply Only of Starter Switch 24v

Supply Only of Feed Pump

Supply Only of AVR

Supply Only of Head Gasket

Supply Only of Belt Small

Supply Only of Belt Large

Supply Only of Rocker Set/ assembly

Supply Only of Turbo Drain Pipe

Supply Only of Packing Kit, complete for the overhaul

Supply Only of Fuel Pipe

Supply Only of House Connection

Supply Only of Copper Washers

Connecting Rod alignment Job, including any stores required for renewal.

Supply Only of Connecting Rod

Transportation required to work site and back/ for shifting of DG Set from one location to another

M&L for Overhaul of DG Set to include disconnecting, taking out and opening of DG set, head job of 63/ 62.5/ 50 KVA gen set etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set, any machining works (such as grinding, milling, Lathe and other jobs), any other job to make the DG Set operational and testing complete all as specified and directed. (The DG Set shall be provided with an all inclusive warranty period of 365 days (of running time) from the date of making the DG set operational. Any off road period during this warranty time will sufficiently enhance the warranty duration) Note :- Cost of spares/ parts/ jobs mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables, spares and jobs are included.

Head facing/Grinding Job

Supply Only of Inlet/Exhaust Valve

Supply Only of Oil Valve Seal

Supply Only of Valve Spring

Supply Only of Valve Guide

Supply Only of Valve seat Inlet/Exhaust

F.I.P Calbiration, cleaning and repair Job (62.5/ 50 kVA DG Set)

Injector Nozzel

Supply Only of Began

Supply Only of Linear

Supply Only of Piston

Supply Only of Ring Set

Supply Only of Main Began Bearing

Supply Only of Connecting Rod Bush

Supply Only of Cylinder Rubber Kit

Supply Only of Hose Kit

Supply Only of Benjo

Supply Only of Non Return Valve (NRV)

Supply Only of Fevibond/ epoxy/ cyanoacrylate, as required for complete overhaul of the DG Set

Supply Only of Battery Charger (smart, fast charging type, with both DC and AC inputs)

Supply Only of Battery Terminals

Supply Only of Head Guide

Supply Only of Water Pump

Dynamo Repair Job

Self Starter Repair Job

Supply Only of Starter Switch 24v

Supply Only of Feed Pump

Supply Only of AVR

Supply Only of Head Gasket

Supply Only of Belt Small

Supply Only of Belt Large

Supply Only of Rocker Set/ assembly

Supply Only of Turbo Drain Pipe

Supply Only of Packing Kit, complete for the overhaul

Supply Only of Fuel Pipe

Supply Only of House Connection

Supply Only of Copper Washers

Connecting Rod alignment Job, including any stores required for renewal

Supply Only of Connecting Rod

Transportation required to work site and back/ for shifting of DG Set from one location to another

M&L for Overhaul of DG Set to include disconnecting, taking out and opening of DG set, head job of 15 KVA gen set etc and reassembling the DG set after repair/renewal of unserviceable parts of DG set, any machining works (such as grinding, milling, Lathe and other jobs), any other job to make the DG Set operational and testing complete all as specified and directed. (The DG Set shall be provided with an all inclusive warranty period of 365 days (of running time) from the date of making the DG set operational. Any off road period during this warranty time will sufficiently enhance the warranty duration) Note :- Cost of spares/ parts/ jobs mentioned below will be measured and paid seprately as supply only under respective items mentioned here-in-below. However other minor consumables, spares and jobs are included.

Head facing/Grinding Job

Supply Only of Inlet/Exhaust Valve

Supply Only of Oil Valve Seal

Supply Only of Valve Spring

Supply Only of Valve Guide

Supply Only of Valve seat Inlet/Exhaust

F.I.P Calbiration, cleaning and repair Job (15 kVA DG Set)

Injector Nozzel

Supply Only of Began

Supply Only of Linear

Supply Only of Piston

Supply Only of Ring Set

Supply Only of Main Began Bearing

Supply Only of Connecting Rod Bush

Supply Only of Cylinder Rubber Kit

Supply Only of Hose Kit

Supply Only of Benjo

Supply Only of Non Return Valve (NRV)

Supply Only of Fevibond/ epoxy/ cyanoacrylate, as required for complete overhaul of the DG Set

Supply Only of Battery Charger (smart, fast charging type, with both DC and AC inputs)

Supply Only of Battery Terminals

Supply Only of Head Guide

Supply Only of Water Pump

Dynamo Repair Job

Self Starter Repair Job

Supply Only of Starter Switch 24v

Supply Only of Feed Pump

Supply Only of AVR

Supply Only of Head Gasket

Supply Only of Belt Small

Supply Only of Belt Large

Supply Only of Rocker Set/ assembly

Supply Only of Turbo Drain Pipe

Supply Only of Packing Kit, complete for the overhaul

Supply Only of Fuel Pipe

Supply Only of House Connection

Supply Only of Copper Washers

Connecting Rod alignment Job, including any stores required for renewal

Supply Only of Connecting Rod

Transportation required to work site and back/ for shifting of DG Set from one location to another

Taking down the radiator complete of 15 to 250 KVA DG set from its mounting and descaling the same including cleaning from top and bottom of the tank and brazing re-soldering complete tank and re-installing the same to its original position all as directed by Engr-in-Charge.

Repair / Complete Overhaul to self starter assembly of DG set of capacity of 82.5 to 250 KVA by cutting of old burnt winding with new copper winding wire as per existing size/ guage including insulation materials, varnishing and heating/ drying up jobs etc complete all as specified and directed.

Repair / Complete Overhaul to self starter assembly of DG set of capacity of 15 to 82.5 KVA by cutting of old burnt winding with new copper winding wire as per existing size/ guage including insulation materials, varnishing and heating/ drying up jobs etc complete all as specified and directed.

Supply and Fixing in renewal TurboCharger complete for DG Set of Capacity of 15 kVA to 250 kVA, including removal of old Turbo Charger, along with all connected Jobs and accessories, complete all as specified, clarified and directed by engineer in charge

Supply and fixing in renewal of off load changeover switch AC, 4 pole, 415 volt upto 320 AMP complete all as specified and directed by Engr-in- Charge.

Supply and fix in renewal of off load changeover switch AC, 4 pole, 415 volt upto 200 AMP complete all as specified and directed Engr-in- Charge.

S&F battery lead wire as per existing size and length, flexible copper conductor single core including taking out old unserviceable battery lead wire complete all as specified and directed by Engr-in-Charge.

S&F battery terminal brass complete with GI nuts & bolts including taking out old unserviceable battery terminal brass complete all as specified and directed Engr-in-Charge.

Repair/renewal of worn out parts of FIP, calibration and testing of fuel pump of 125 to 250 KVA DG set and testing on test bench and renewal of pump element, delivery valve, ball bearing and adjustment of injectors and setting of fuel pressure as per manufacturer instructions complete all as directed by the Engr-in-charge.

Repair / renewal of worn out parts of FIP, calibration and testing of fuel pump of 15 KVA to 125 KVA DG set and testing on test bench and renewal of pump element, delivery valve, ball bearing and adjustment of injectors and setting of fuel pressure as per manufacturer instructions complete all as directed by the Engr-in-charge.

Supply only distilled water for battery top up in one/ five litre packaging complete all as specified and directed by Engineer in charge

Supply Only lead acid battery 12 volt 150 AH with suitable 'C' Rating for use in DG set of capacity upto 250 kVA (or other equipment such as VCBs, etc), with minimum warranty of 36 months (of all inclusive renewal warranty - any pro rata warranty shall be over and above this 36 months warranty), all as specified and defined by Engineer in Charge, of Make: Exide / Amaron/ Luminous

Supply Only Engine oil of recommended grade 15W40, in sealed containers (containers are to be left in MES) complete all as specified and directed by engineer in charge.

Supply Only Engine Coolent in sealed containers (containers are to be left in MES) complete all as specified and directed by Engineer-in-charge.

Supply Only Engine Oil Filter Suitable for up to 62.5 to 250 KVA DG Set complete all as specifed and directed by Engineer-in-Charge

Supply Only Engine Oil Filter Suitable for 15 to125 KVA DG Set complete all as specifed and directed by Engineer-in-Charge

Supply and fix alumimium lugs of size 50 mm sqmm complete all as specified and directed.

Supply and fix alumimium lugs of size 70 mm sqmm complete all as specified and directed.

Supply and fix alumimium lugs of size 120 mm sqmm complete all as specified and directed.

Supply and fix alumimium lugs of size185 mm sqmm complete all as specified and directed.

Supply and fix alumimium lugs of size 240 mm sqmm complete all as specified and directed.

M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed by the Engineer-in-charge.

m/s mohd saleem and co (BID ID -3162559)

M/S GHULAM RASOOL LONE (BID ID -3153117)

M/S Sky Engineers (BID ID -3162706)