Procurement, design, supply, installation, testing and commissioning of Movable Mobile potato grader, mobile grain cleaner and mobile round fruit graders at different locations in Himachal Pradesh.

Amount

MOVABLE WHEAT & PADDY CLEANING MACHINE – 5 MT DUMP HOPPER (2m X 1m) V.B.ELEVATOR WITH SUITABLE DISCHARGE HEIGHT (Capacity 5.0 TPH based on Wheat)  With pressure release cage with bag filter.  Wing type boot pulley.  Belt NN 315/3 (3ply) rubberised.  Double box casing contruction.  Boot shall be made of 3 mm.  Middle casing: 1.6mm & Head: 2mm  Belt speed not to exceed 1.2 M/SEC  Buckets: Self cleaning type, PU/Nylon/HDPE with spacers between bucket & belt.  Discharge pipe made of 2mm SS pipe with both end flanged.  To be operated by not more than 2 HP geared motor of Rotomotive/Siemens/Equivalent Make.  Cascade type magnetic arrangement.

DEBEARDER Capacity: 5TPH based on wheat.  Power consuption: Not more than 7.5 HP. Provision for byepass if not required.

GRAIN PRE-CLEANER WITH SCALPARATOR Capacity: 5 TPH based on wheat at 10% moisture content & 20 % impurities.  No. of layers : 3  Top screen : Scalping  Middle & Bottom screen: Provision to get final seed/grain either from both middle & bottom or from middle/bottom saparetaly.  Sieve Inclination: Top: min 8, Middle & bottom : 10  Total screen area in Sq.m. minimum 6 m2  No. of aspiration: 2  Screen cleaning device: rubber balls  Sieve boat made of compressed laminated pltwood with minimum thickness 21mm.  Body base frame made of M.S. Channel, thickness min. 6 mm, size: 150x75mm  Main frame made of rectangle pipe size 1222x61mm and thickness min. 4 mm.  Top mounted blower with minimum 6500 CMH.  Total HP not more than 6 HP.  Electric motors should be of make ABB/Rotomotive/Equivalent make for operation on 440V 3 phase 50 c/s AC supply.  Bearing should be of make : SKF/NTN/FYH/NRB/Dodge.

V.B. ELEVATOR Same as above with suitable height without cascade type magnetic arrangement

GRAIN DE-STONER (Capacity 5TPH based on wheat)  Nagative Pressure type  Double deck type.  Top mounted blower.  Separate foundation frame for blower for low vibration.  Deck size: min. 1200x1350 mm  Fan not more than 12.5 HP and Deck Vibro motor not more than 1 HP x 2 no.’s

V.B. ELEVATOR Same as above with suitable height without cascade type magnetic arrangement

BAGGING BIN  Capacity: 3 tons on wheat.  55 hoppered bottom for self-cleaning.  With top cover with man hole & pressure release cage with bag filter.  Ladder  Hopper bottom sheet thickness min. 2mm of G.I. Sheet.  Side sheet thickness: min. 1.6mm of G.I. Sheet.  Inspection window: made of acrylic sheet, thickness min 4mm.  Legs made of MS pipe, min. size 80x40x3mm.  Bracings made of MS Pipe, min. size 40x40x3mm.

AUTOMATIC WEIGHER AND BAGGER (Weighing range: 5-50 kgs.)  PLC based pannel with 7K.  Weighing hopper load cell based hermetically sealed IP67 protected.  No. of load cells: 3 Nos.  Pneumatic disc gate for bag holding & filling.  Sector gate with coarse & fine feeding.  Digital input: 14 & digital output: 10  Air compressor 3 HP for operating weigher & bagger.

PORTABLE BAG CLOSER

CENTRALIZED ELECTRIC CONTROL PANEL WITH CHANGEOVER AND ELECTRIC CABLES & ACCESSORIES  Switch gears are of schneider make.  Changeover are of Havells/Socomap make.  Panel cables should be of polycab make.  Panel to machine cables should be armored cable, FRLS type.

MOISTURE METER

MOVABLE ROUND FRUITS GRADER-3MT SORTING TABLE Consisting of PVC Belt. Contact parts made of stainless steel and structure of mild steel. The products will be dumped onto the Belt with the help of feeding conveyor which will be conveyed forward with the help of the belt. The workers standing on both sides of the machine will sort out the damaged or rotten products and will take those products out of the machine.  Length : 3000 mm  Width : 825 mm  Power : 1.5 HP. 3 Ph

WASHING CUM SPONGING The washer is fitted with nylon bristle rollers rotating on their own axis. The products will be let onto the bristle rollers from the sorting conveyor through suitably designed spout. Sprinkler arrangement will be provided on the top of the moving products by a water pump and GI pipelines. Water will be sprayed on the products while they move forward slowly. The bristle rollers gently rub the surface of the products and clean it properly. The dirty water accumulates on a water tank (S.S) fitted below the machine and discharges out continuously. After washing the sponging rollers will wipe out the surface water from the products. Structure of mild steel. This washing process is automatic only the machine should be connected with a constant water supply point. Squeezing rollers provided to remove moisture from sponge rollers. Sponge roller are provided in the form of dunut for easy maintenance.  Length :2500 mm.  Width :825mm of roller  Power :1.0 H.P, 3 Ph

CONTROL PANEL The control panel helps in proper electrical synchronization and control of all the machines from a single place. All the machines can be switched On or Off from a single place by a single person. There is no need to fit individual motor starter and main switch on each machine.

MOVABLE ROUND FRUIT GRADER-2 MT SORTING TABLE Consisting of PVC Belt. Contact parts made of stainless steel and structure of mild steel. The products will be dumped onto the Belt with the help of feeding conveyor which will be conveyed forward with the help of the belt. The workers standing on both sides of the machine will sort out the damaged or rotten products and will take those products out of the machine.Length : 3000 mm  Width : 600 mm  Power : 1.25 HP. 3 Ph

WASHING CUM SPONGING The washer is fitted with nylon bristle rollers rotating on their own axis. The products will be let onto the bristle rollers from the sorting conveyor through suitably designed spout. Sprinkler arrangement will be provided on the top of the moving products by a water pump and GI pipelines. Water will be sprayed on the products while they move forward slowly. The bristle rollers gently rub the surface of the products and clean it properly. The dirty water accumulates on a water tank (S.S) fitted below the machine and discharges out continuously. After washing the sponging rollers will wipe out the surface water from the products. Structure of mild steel. This washing process is automatic only the machine should be connected with a constant water supply point. Squeezing rollers provided to remove moisture from sponge rollers. Sponge roller are provided in the form of dunut for easy maintenance.  Length :2500 mm.  Width :700 mm of roller  Power :1.0 H.P, 3 Ph

CONTROL PANEL The control panel helps in proper electrical synchronization and control of all the machines from a single place. All the machines can be switched On or Off from a single place by a single person. There is no need to fit individual motor starter and main switch on each machine.

MOVEABLE POTATO GRADER-5MT ELEVATOR: - The elevator designs to overcome height in production line. The machine is design and transport to provide in gentle but first manner. The belt has a double layer of PVC to guidelines and adjustable in height in angles. The crop grade material contacts part made up of Stainless steel and Structure is made up of Mild steel. The product will be dropped on to the belt and this belt will help in feeding the inspection table. Length: - 2500mm Width: - 600mm Power: - 1 Hp 3PH

SCREEN SIZER: - The screen sizer is design to grade accordingly to the square and hexagonal size. The machine has a vibrating rotating robber belt with openings. If the product smaller to the opening it falls on the conveyor belt which is use for the packaging. The contacts parts made of stainless steel and structure of mild steel. This sizer is very gentle for sizing the produce as it consists of a rubber belt, which do not destroy or distressed any crop. Length: - 1500mm Widht: - 1200mm Power: - 1.5 Hp 3PH GRADER FEATURES. 1. Simple design. 2. Fruit friendly. d. CONTROL PANEL The control panel helps in proper electrical synchronization and control of all the machines from a single place. All the machines can be switched On or Off from a single place by a single person. There is no need to fit individual motor starter and main switch on each machine. 1 No. 3. Strudy construction. 4. Portable and modular design 5. Less power requirement. 6. Fast operation than manual labour 7. Less space requirement

CONTROL PANEL:-The control panel helps in proper electrical synchronization and control of all the machines from a single place. All the machines can be switched on or off from a single place by a single person. There is no need to fit individual motor starter and main switch on each machine.VFD provided for required machine for Speed variation. There will be trailer on which all these three will be fitted this trailer can be attached to a tractor and then it can be transport to anywhere

MOVABLE GARLIC GRADER-5MT ELEVATOR:- The elevator designs to overcome height in production line. The machine is design and transport to provide in gentle but first manner. The belt has a double layer of PVC to guidelines and adjustable in height in angles. The crop grade material contacts part made up of Stainless steel and Structure is made up of Mild steel. The product will be dropped on to the belt and this belt will help in feeding the inspection table. Length :- 2500mm Width :- 600mm Power :- 1 Hp 3PH

Sorting table: - Consisting of PVC belt contact parts made of stainless steel and structure of mild steel. The products will be dumped onto the belt with the help of feeding conveyor, which will be conveyed, forward with the help of the belt. The workers standing on the both sides of the machines will sort out the damaged or roller products and will take those products out of the machine. Length-3000mm Width- 852mm Power- 1.5 HP, 3PH

SCREEN SIZER: - The screen sizer is design to grade accordingly to the square and hexagonal size. The machine has a vibrating rotating robber belt with openings. If the product smaller to the opening it falls on the conveyor belt which is use for the packaging. The contacts parts made of stainless steel and structure of mild steel. This sizer is very gentle for sizing the produce as it consists of a rubber belt, which do not destroy or distressed any crop. Length: - 1500mm Width: - 1200mm Power: - 1.5 Hp 3PH GRADER FEATURES. 1. Simple design. 2. Fruit friendly. 3. Strudy construction. 4. Portable and modular design 5. Less power requirement. 6. Fast operation than manual labour 7. Less space requirement.

CONTROL PANEL The control panel helps in proper electrical synchronization and control of all the machines from a single place. All the machines can be switched on or off from a single place by a single person. There is no need to fit individual motor starter and main switch on each machine.VFD provided for required machine for Speed variation. There will be trailer on which all these three will be fitted this trailer can be attached to a tractor and then it can be transport to anywhere

OSAW Industrial Product Pvt. Ltd.