SPECIAL REPAIRS TO WATER SUPPLY SYSTEM, E/M INSTALLATION AND CONNECTED WORK AT UDAIPUR MIL STN

Amount

Excavating in trenches n.exc 1.5 m width and n.exc 1.5m in depth for taking out cable and cable cover and getting out in any type of soil

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 Cm

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point

Material and labour for sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured.

Material and labour for stone slab ( patti) roughly hammer dressed stone 25 to 35 mm thick 25 to 30 cm wide and not less than 60 cm long laid dry and abutting each other with gap between adjacem,ent salb not exceeding 10 mm over underground cables for protection.

Taking out of submersible pump set of any make from borewell/ Openwell/ sump and servicing of pump set of capacity 12.5 HP by replacing of wear & tear parts/rewinding and relowering , including necessary electric and water connections, testing at site all as specified and directed.

Taking out of submersible pump set of any make from borewell/ Openwell/ sump and servicing of pump set of capacity 7 HP by replacing of wear & tear parts/rewinding and relowering, including necessary electric and water connections, testing at site all as specified and directed.

Taking out of submersible pump set of any make from borewell/ Openwell/ sump and servicing of pump set of capacity 40 HP by replacing of wear & tear parts/rewinding and relowering, including necessary electric and water connections, testing at site all as specified and directed.

Supply and fixing Star Delta starter MUg-10 with MS sheet( 2 mm Thick) enclosure suitable for - 7.5 HP Submersible motor/Monoblock motor pump in existing location including making connection with PVC insulated 1100 volts grade ,three core , multistranded copper conductor of size 6.0 sq mm with voltmeter,ampere meter, Auto Switch,Single Phase Preventor & Indicating Lamp Led Type for Phase Indication (Red Yellow & Blue) ,all as directed and specified . Make : L&T/Siemens.

Supply and fixing MUg-15 Star Delta starter with MS sheet( 2 mm Thick) enclosure suitable for -12.5 HP Monoblock Pump motor in existing location including making connection with PVC insulated 1100 volts grade ,three core, multistranded copper conductor of size 6.0 sq mm with voltmeter,ampere meter, Auto Switch,Single Phase Preventor & Indicating Lamp Led Type for Phase Indication (Red Yellow & Blue) ,all as directed and specified . Make : L&T/Siemens.

Supply and fixing MUg-50 Star Delta starter with MS sheet( 2 mm Thick) enclosure suitable for 40 HP Submerrsible Pump motor in existing location including making connection with PVC insulated 1100 volts grade ,three core, multistranded copper conductor of size 6.0 sq mm with voltmeter,ampere meter, Auto Switch,Single Phase Preventor & Indicating Lamp Led Type for Phase Indication (Red Yellow 7 Blue) ,all as directed and specified. Make : L&T/Siemens.

Supply and fixing L&T 3 phase star-delta starter with MS sheet( 2 mm Thick) enclosure suitable for 50 HP Submersible Pump motor in existing location including making connection with PVC insulated 1100 volts grade ,three core , multistranded copper conductor of size 6.0 sq mm with voltmeter,ampere meter, Auto Switch,Single Phase Preventor & Indicating Lamp Led Type for Phase Indication (Red Yellow 7 Blue) ,all as directed and specified . Make : L&T/Siemens.

Material & labour for taking out Unserviceable pumpset (alongwith submiersible motor) of any capacity, make & depositing the same in MES store yard from borrewell depth approx 120-150 mtr, including lowering of New supply, installing, testing and commissioning submersible pump set, electric motor 7.5 HP three phase 415 volts, AC soupled with multistate having discharge 2.5 LPS at 143 Mtrs Head. Outlet size 50mm. Make : Kirloskar/Crompton/CRI. Note : Rates are deemed to be including for making flanged joints with new rubber washers and nuts, bolts work and all as directed by Engr-in-Charge.

Material and labour for painting of metal surfaces of any shapes with two coats of synthetic enamel paint of approved quality and colour incl preparation of old painted steel surgaces as directed by Engr-in-Charge. (Make : Asian Paint, Branks-Premium gloss enamel/Berger- Luxol High Gloss/ Nerolac-Sunthetic HI-Gloss)

Supply, laying and testing cable XLPE insulated, screened, PVC beeded, galvanised, steel strip or wire armoured, electric power cables (heavy duty) 110 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core. Make : Polycab/Finolex/Havels.

Supply, laying and connecting submersible cable water proof flat 3 core copper conductor PVC insulated & PVC sheathed 1100 Volts grade 6 Sqmm as per IS-694 for subemrsible pumps. Make: Polycab/Finolex/Havels.

Taking down and removing u/s old unsv CI body sluice valve and supply, install, testing and commissioning of cast iron sluice valve 150mm dia, class pin 1.60 ISI marked with both ends flanged with cast irin body and iron wheel and brass spindle non rising type including necessary jointing material with nuts, bolts, washers and rubber sheet 4mm thick with 2 Nos of 150mm GI flanged for GI pipe complete all as directed. Make : Zoloto/Kirloskkar/ or ISI marked.

Taking down and removing u/s old unsv CI body sluice valve and supply, install, testing and commissioning of cast iron sluice valve 100mm dia, class pin 1.60 ISI marked with both ends flanged with cast irin body and iron wheel and brass spindle non rising type including necessary jointing material with nuts, bolts, washers and rubber sheet 4mm thick with 2 Nos of 100mm GI flanged for GI pipe complete all as directed. Make : Zoloto/Kirloskar/ or ISI marked.

Taking down and removing u/s old unsv CI body sluice valve and supply, install, testing and commissioning of cast iron sluice valve 80mm dia, class pin 1.60 ISI marked with both ends flanged with cast irin body and iron wheel and brass spindle non rising type including necessary jointing material with nuts, bolts, washers and rubber sheet 4mm thick with 2 Nos of 80mm GI flanged for GI pipe complete all as directed. Make :: Zoloto/Kirloskar/ or ISI marked.

Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 50 KVA-02 Nos including replacement of following spares complete all as specified and directed. Note: Spares will be measured & paid separately under respective items herein after.

Supply only of Fuel Filter

(a) Supply only of Lubricant oil filter

(b) Supply only Carbon Bush

(c) Supply only Air Filter element

(d) Supply only Radiator hose pipe set

(e) Supply only Fan belt

(f) Supply only LLOP Sensor

Material & Labour for taking out old U/S engine oil from 50 KVA capacity DG Sets sumps, cleaning the sump throughly, supply & filling new engine oil complete of Make: Servo Super 20W40 of Indian Oil or Equivalent grade of Hindustan Petroleum as approved by GE, complete all as specified and directed Note : Payments will be made as per sumps capacity of reparied DG set.

Material & Labour for topping up of water coolant in radiator of 50 KVA capacity DG set, complete all as specified and as directed.

Material & Labour for dismantling of FIP for overhauling and calibration in authorised workshop including replacement of worn-out rings plungers, damper plate, gasket etc reassembling and testing complete all as specifed and as directed for 50 kva DG Set:

Supply & Fixing in replacement of old U/S automatic voltage regulator suitable for DG set of 50 KVA of approved Make & model by the AGE(I), complete all as specified and as directed

Supply & Fixing in repairs Electronic Controller in AMF Panel of DG Set capacity 62.5 KVA and making all necessary connection and programming to make functional of DG Set.

Supply & Fixing in repairs Electronic Controller in AMF Panel of DG Set capacity 100 KVA and making all necessary connection and programming to make functional of DG Set.

Taking down existing rusted GI tubing and supply & fixing only medium grade including cutting bending and necessary fittings like union, elbow, bend, Tee ect as required at site fix on wall or ceiling or laid under floor or in trench complete all as directed of following sizes :- Make : Jindal/Praksh Surya.

(a) 20mm bore Pipe

(b) 25 mm bore pipe

(c) 50mm bore Pipe

(d) 100mm bore Pipe

Supply & Fixing in replacement of old U/S following MCCB complete all as specified and as directed Make : Havels/Legrand/Siements (3VL).

(a) MCCB 125A, 25KA 4Pole with thermal magnetic relay.

(b) MCCB 160A, 25KA 4Pole with thermal magnetic relay

Punjab Traders